ENGLISH COLLATED MAGAZINE ATTACHMENT DCF6201 Congratulations WARNING! Read all safety warnings and all instructions provided with your You have chosen a D WALT tool. Years of screwdriver (DFC620 or DCF621). experience, thorough product development and Failure to follow the warnings and...
ENGLISH Residual Risks d. Advancing mechanism e. Shoe In spite of the application of the relevant safety regulations and the implementation of safety f. Advancing mechanism removal button devices, certain residual risks cannot be avoided. g. Release buttons These are: h.
ENGLISH Inserting Collated Screw Strips Installing and Removing the (fi g. 4) Magazine from the Screwdriver (fi g. 2) NOTICE: Use only screw strips that are suitable to this magazine. Only insert With the the nose cone removed and provided driver screw strips when the screwdriver bit (h) installed, push the magazine over the bit onto power is off and the trigger is locked.
ENGLISH The magazine is designed to drive screws For best performance clean magazine by: completely into work piece only. Once screwdriver 1. Remove advancing mechanism from collated is lifted, adjustments to screw must be made by first magazine (see Removing and Installing the removing magazine.
ENGLISH Optional Accessories WARNING: Since accessories, other than those offered by D WALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only D WALT recommended accessories should be used with this product.
Page 12
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT Tel: 70 20 15 10 www.dewalt.dk...