Table of Contents
Advertisement
P703 Installation Guide
70" LCD Display
Input Panels:
Bottom:
Control Codes:
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection:
Communication Protocol:
Interface:
Communication System:
Baud Rate:
Data Length:
Parity:
Stop Bit
Communication Code:
Interface:
Communication System:
Communication Layer:
IP Address:
Port Number:
NOTE: If so desired, jumper "Request to send" and "Clear to Send" together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (TxD), 3 (RxD) and 5 (GND).
www.necdisplay.com
RS-232C
Asynchronous
9600 bps
8 bits
None
1 bit
ASCII
Ethernet (CSMA/CD
TCP/IP (Internet Protocol Suite)
Transport layer (TCP)
192.168.0.10 (default out of box)
7142 (Fixed)
NEC Display Solutions of America, Inc.
Transmit Data+
Transmit Data-
Receive Data+
Not Used
Not Used
Receive Data-
Not Used
Not Used
P703
Rev 1.0
Page 8 of 9
Advertisement
Table of Contents
