Page 1
LCD Colour TV Start-up Guide Operating the TV Operating Instructions Using Optional Equipment Using Menu Functions Additional Information KLV-40NX520 / 40CX420 / 40BX420 / 32NX520 / 32CX420 / 32CX320 / 32BX320 / 26CX320 KLV-26BX320 / 22CX320 / 22BX320 / 32BX311...
Page 2
Introduction Trademark information Thank you for choosing this Sony product. • HDMI, the HDMI Logo, and High-Definition Before operating the TV, please read this manual Multimedia Interface are trademarks or registered thoroughly and retain it for future reference. trademarks of HDMI Licensing LLC in the United States and other countries.
IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television.
Table of Contents Start-up Guide Using Menu Functions Checking the accessories ........6 Navigating through menus ....... 18 1: Attaching the stand.........6 Using the Favourites ........18 2: Connecting an antenna/cable/VCR ....7 Playing back photo/music/video via USB..19 3: Preventing the TV from toppling over .....7 Listening to the FM Radio ........
Start-up Guide B KLV-22CX320/KLV-22BX320 Checking the accessories Stand (1) and screws (7) (for KLV-40/32NX520 (8)) Remote RM-GA020 (1) Size AA batteries (R6 type) (2) To insert batteries into the remote Push to open 1: Attaching the stand • Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws.
Tie the wood screw and the machine screw with a strong cord (not supplied). z • An optional Sony support belt kit is used to secure the TV. Contact your nearest Sony service centre to purchase a kit. Have your TV model name ready for reference.
4: Performing the initial Watching TV set-up Press 1 on the TV to turn on the TV. Press the number buttons or PROG +/– to select a TV channel. Press 2 +/– to adjust the volume. * The shapes of AC power plug and AC power outlet differ depending on the region.
Adjusting the viewing angle Detaching the stand from the of the TV (NX520 models only) • Do not remove the stand for any reason other than to wall-mount the TV. This TV can be adjusted within the angles B KLV-40/32NX520/KLV-40/32CX420/KLV- shown below.
– KLV-40NX520/40CX420/40BX420/ AC power outlet. 32NX520/32CX420/32CX320/ • When lifting or moving the TV set, hold it – Use only Sony supplied AC power cords, 32BX320/32BX311: firmly from the bottom. not those of other brands. Wall-mount bracket SU-WL50B •...
Operating the TV Overview of the remote – Input select / Text hold • Displays the connected equipment list and selects the input source (page 16). • In Text mode: Holds the current page. 2 SYNC MENU Press to display the BRAVIA Sync Menu and then select connected HDMI equipment from “HDMI Device Selection”.
Page 13
– Info / Text reveal • Displays information. Press once to display information about the programme/ input you are viewing. Press again to remove the display from the screen. • In Text mode: Reveals hidden information (e.g. answers to a quiz). –...
Overview of the TV buttons and indicators 1 1 – Power Press to turn the TV on or to switch to standby mode. • To disconnect the TV from the AC power completely, pull the plug from the AC power outlet.
Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV. player Home with Blu-ray (HDMI- Audio theatre HDMI Disc output) system system Camcorder output player Not available for KLV-32BX311 Digital still camera Camcorder USB storage media...
• You cannot use the component video jack and the video jack 1 at the same time. You can enjoy photo/music/video files stored in a Sony digital still camera, camcorder or USB storage device (page 19). Connect to the video jack 2 and the audio jacks 2.
Viewing Twin Picture Viewing PIP (Picture in Picture) You can view two pictures (in PC input mode) on the You can view two pictures (in Component and HDMI screen simultaneously. input mode) on the screen simultaneously. Connect a PC (page 15), and make sure that images Connect the optional equipment (page 15), and make from a PC appear on the screen (page 16).
Using Menu Functions Navigating through menus The HOME button allows you to access a variety of TV settings, USB media files and FM Radio mode. Press HOME on the TV or remote. Press to select an option, then press Follow the instructions on the screen. To exit the menu, press HOME.
Playing back photo/music/video via USB You can enjoy photo/music/video files stored in a Sony digital still camera or camcorder through a USB cable or USB storage device on your TV. Connect a supported USB device to the TV. Press HOME.
Page 20
– Do not remove the USB device. The data on the USB device may be damaged. • Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV.
Page 21
USB Video format Extension Container Video Codec Audio Codec DivX 3.11/4.x/5.1 PCM / MPEG1 Layer1, 2 / MP3 / XviD MPEG2 AAC (2ch) / MPEG1 MPEG4 AAC (2ch) / .avi MPEG4 HE-AAC (2ch) / MPEG2 MP Dolby Digital (2ch) / H.264 BP/MP/HP WMA v8 MPEG-4 SP/ASP...
Listening to the FM Radio You are able to listen to the FM radio stations using your TV by connecting an antenna (page 7). FM Radio tuning range is from 87.5-108.0 MHz. When you use the FM Radio function for the first time, press HOME and select “FM Radio”, then perform “Auto Tuning”...
Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system. • You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote. Possible operations with BRAVIA Sync buttons, see page 12.
Settings adjustment • The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed. Picture Picture Mode Sets a picture mode. The options that can be selected differ depending on the “Scene Select” settings. “Vivid”: Enhances picture contrast and sharpness.
Advanced Settings Allows you to set “Picture” settings in more detail. These settings are not available when “Picture Mode” is set to “Vivid”. “Reset”: Resets all the advanced settings to the factory settings. “Adv. Contrast Enhancer”: Automatically adjusts “Backlight” and “Picture” to the most suitable settings judging from the brightness of the screen.
Page 26
Surround Allows you to select the suitable surround effects depending on the genre of TV programme (movie, sport, music, etc.) or video game. The options that can be selected differ depending on the “Scene Select” settings. “On”: Delivers surround effects that help you enjoy the virtual two-ch surround audio with just the two internal TV speakers.
Screen Wide Mode For details about wide mode, see page 13. Auto Wide Automatically changes the wide mode according to the input signal from an external equipment. To keep your setting, select “Off”. • “Auto Wide” is only available when watching programmes from video input, HDMI and component input in format 480i or 576i.
Page 28
PC input signal reference chart for PC and HDMI IN For KLV-40NX520/KLV-40CX420/KLV-40BX420/KLV-32NX520/KLV-32CX420 Horizontal Horizontal Vertical Signals Vertical (Line) Standard (Pixel) frequency (kHz) frequency (Hz) 31.5 SVGA 37.9 VESA Guidelines 1024 48.4 VESA Guidelines WXGA 1280 47.4 VESA WXGA 1280 47.8...
Channel Set-up 1 Digit Direct When “1 Digit Direct” is set to “On”, you can select a channel using one preset number button (0 - 9) on the remote. • When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering next digit using the remote.
“Audio Filter” Improves the sound of individual channels when distortion occurs in mono broadcasts in TV system “B/G”, “I” and “D/K”. • You cannot receive stereo or dual sound when “High” is selected. “Skip” Skips unused channels when you press PROG +/– to select channels. (You can still select a skipped channel using the number buttons.) “Colour System”...
Set-up USB Auto Start Automatically enters the thumbnail view of the last played Photo/Music/Video when the TV is turned on and a USB device is connected to the USB port then turned on. Sleep Timer Set the time in minutes (“Off”, “15”, “30”, “45”, “60”, “90”, or “120”) that you would like the TV to remain on before shutting off automatically.
Page 32
Control for HDMI. When set to “On”, the following functions are available. If the specific Sony equipment that is compatible with Control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI”...
Reset Resets the current Eco settings to the default values. Power Saving Reduces power consumption of the TV by adjusting the backlight. When you select “Picture Off”, the picture is switched off, and the (Picture Off) indicator on the TV front panel lights up in green. The sound remains unchanged. Idle TV Standby Turns the TV off after it has been kept idle for the preset length of time.
Sufficient expertise is required for installing these products, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of these products to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or...
KLV-22CX320 KLV-22BX320 SU-WL50B: Screen centre point Unit: mm Screen centre Display dimensions Length for mounting dimension Model name KLV-40NX520 1,000 KLV-40CX420 KLV-40BX420 KLV-32NX520 KLV-32CX420/ KLV-32CX320 KLV-32BX320/ KLV-32BX311 Figures in the above table may differ slightly depending on the installation. WARNING The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV.
Hook location - When installing the TV onto the Base Bracket. SU-WL100 SU-WL50B Base Bracket Hook * Hook location “a” cannot be used for the models in the table below. Screw location Hook location Model name SU-WL50B SU-WL50B KLV-40NX520/KLV-40CX420/KLV-40BX420 d, i KLV-32NX520/KLV-32CX420/KLV-32CX320/ e, h KLV-32BX320/KLV-32BX311 SU-WL100 KLV-26CX320/KLV-26BX320 KLV-22CX320/KLV-22BX320...
No colour or irregular colour when viewing a signal the AC power cord, and inform your dealer or from the Y, P jacks of Sony service centre of how the indicator • Check the connection of the Y, P jacks of flashes (number of flashes).
Page 38
General The TV turns off automatically (the TV enters standby mode) • Check if the “Sleep Timer” is activated (page 31). • Check if the “Idle TV Standby” is activated (page 33). Some input sources cannot be selected • Select “Video Labels” and cancel “Skip” of the input source (page 31).
D/K: VHF: C1 to C12, R1 to R12/ UHF: C13 to C57, R21 to R60/ CATV: S01 to S03, S1 to S41, Z1 to Z39 M: VHF: A2 to A13/ UHF: A14 to A79/ CATV: A8 to A2, A to W+4, W+6 to W+84 Sound output KLV-40NX520/40CX420/40BX420/32NX520/32CX420/32CX320/32BX320/32BX311: 8 W + 8 W KLV-26CX320/26BX320/22CX320/22BX320:...