Table of Contents
Advertisement
2-7-2. Correction of Distortion after Edge Blending Adjustment
After performing the blending adjustment of the two projectors, a misregistration as shown below may
occur due to the image distortion.
This image distortion is corrected.
1. Start the SRX Controller, then click the [SERVICE] tab. (Refer to Section 2-1-3.)
The [SERVICE] screen is displayed.
[MASKING ADJUST/EDGE BLENDING]
Screen example
2. Click the [BLENDING] button of [MASKING ADJUST/EDGE BLENDING].
The [BLENDING DISTORTION ADJUST screen is displayed.
[BLENDING DISTORTION ADJUST]
Screen example
SRX-T615
[SERVICE] tab
t
The marks ◊ in [BLENDING DISTORTION ADJUST]
indicate the adjustment points.
2-41 (E)
Advertisement
Table of Contents
