Faq - Panasonic TC-37LZ85 Operating Instructions Manual
37” class 1080p lcd hdtv
Hide thumbs
Also See for TC-37LZ85:
- Service manual (65 pages) ,
- Operating instructions manual (50 pages) ,
- Manual de instrucciones (48 pages)
Table of Contents
Advertisement
FAQ
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance.
For details (p. 48, 49)
For additional assistance, please contact us via the website at:
www.panasonic.com/contactinfo
www.panasonic.ca
White spots or
shadow images
(noise)
Check the position, direction,
and connection of the antenna.
Interference or
frozen digital
channels
(intermittent sound)
Change the direction of antenna
for digital channels.
Check "Signal meter" (p. 33).
If the signal is weak, check the
antenna and consult your local
dealer.
The LCD panel moves
slightly when it is
pushed with a fi nger.
A clattered sound
might be heard
This is not a malfunction.
There is some looseness around
the panel to prevent the damage to
the panel.
44
Pictures from external
equipment are distorted
when the unit is
connected via HDMI
Is the HDMI cable connected properly?
(p. 37, 38)
Turn Off the TV unit and equipment, then
SUB
MENU
turn them On again.
Check an input signal from the equipment.
(p. 42)
Use equipment compliant with
EIA/CEA-861/861B.
Recording does not
start immediately
Check the settings of the recorder. For
details, read the manual of the recorder.
-
The remote control does
not work
Are the batteries installed correctly? (p. 6)
Has the battery run down?
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Problem
Chaotic image, noisy
No image can be
displayed
Only spots are displayed
instead of images
Neither image nor
sound is produced
No sound is produced
Sound is unusual
The main unit is hot.
Actions
Check nearby electrical products
(car, motorcycle, fluorescent lamp).
Check Picture menu (p. 22)
Check the cable connections.
Check that the correct input has been selected.
Check the channel settings. (p. 32)
Check the antenna cables.
Is the power cord plugged into the outlet?
Is the TV unit turned On?
Check Picture menu (p. 22) and volume.
Check the AV cable connections.
Check that the correct input has been selected.
Are the speakers' cables connected correctly?
Is "Sound Mute" active? (p. 12)
Is the volume set to the minimum?
Is "Speaker output" set to "Off"? (p. 22)
Change "SAP" settings. (p. 16)
Check "HDMI 1 in", "HDMI 2 in" or "HDMI 3 in" settings.
(p. 22)
Set "SAP" setting to "Stereo" or "Mono."
Check the HDMI device connected to the unit.
Set the audio setting of the HDMI device to
"Linear PCM."
If digital sound connection has a problem,
select analog sound connection.
The main unit radiates heat and some of the parts may
become hot. This is not a problem for performance or
quality.
Set up in a location with good ventilation.
Do not cover the ventilation holes of the TV with
a tablecloth, etc., and do not place on top of other
equipment.
45
Hide quick links:
Advertisement
Table of Contents
