Advertisement
Quick Links
WASHER INSTALLATION INSTRUCTIONS
INSTRUCCIONES PARA LA INSTALACION DE
LA LAVADORA
INSTRUCTIONS POUR L'INSTALLATION DE LA LAVEUSE
Table of Contents/|ndice /Table des matibres
WASHER SAFETY ............................................
1
INSTALLATION
REQUIREMENTS
................. 2
Tools and Parts .............................................
2
Location Requirements .................................
2
Drain System .................................................
3
Electrical Requirements
................................
3
INSTALLATION
INSTRUCTIONS
................... 4
Before You Start ............................................
4
Remove Shipping Strap ................................
4
Connect Drain Hose ......................................
5
Connect the Inlet Hoses ...............................
6
Secure the Drain Hose ..................................
6
Level the Washer ...........................................
7
Complete Installation ....................................
7
SERVICE NUMBERS ................. BACK COVER
SEGURIDAD
DE LA LAVADORA .................... 8
REQUISITOS
DE INSTALACI(_N .................... 8
Herramientas y piezas ...................................
8
Requisitos de ubicaei6n ................................
9
Sistema de desagLie .....................................
9
Requisitos el_ctricos ...................................
10
INSTRUCCIONES
DE INSTALACION .......... 11
Antes de empezar .......................................
11
Quite el fleje de embalaje ............................
11
Conecte la manguera de desagL_e.............. 11
Conecte las mangueras de entrada ........... 12
Asegure la manguera de desag L_e .............. 13
Nivele la lavadora ........................................
13
Complete la instalaci6n ...............................
13
NUMEROS
DE SERVICIO .................... CONTRAPORTADA
SEOURITle DE LA LAVEUSE ......................... 14
EXlGENCES
D'INSTALLATION
.................... 14
Outillage et pi_ces .......................................
14
Exigences de I'emplacement
d'installation
15
Syst_me de vidange ...................................
15
Specifications
electriques ...........................
16
INSTRUCTIONS
D'INSTALLATION
.............. 17
Avant de commencer ..................................
17
Elimination de la sangle d'exp_dition
......... 17
Raceordement
du tuyau de vidange .......... 17
Raccordement
des tuyaux d'arriv_e d'eau 18
Immobilisation
du tuyau de vidange ........... 19
R¢glage de I'aplomb de la laveuse ............. 19
Achever I'installation ...................................
19
NUMI_ROS
DE SERVICE ............. COUVERTURE
ARRII_RE
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided
many
important
safety messages
in this manual
and on your appliance.
Always
read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
8537142
Advertisement
Related Manuals for Kenmore 11012502100
Summary of Contents for Kenmore 11012502100
- Page 1 Remove Shipping Strap ... Connect Drain Hose ... Connect the Inlet Hoses ... Secure the Drain Hose ... Level the Washer ... Complete Installation ... SERVICE NUMBERS ... BACK COVER Your safety and the safety of others are very important.
- Page 2 • A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is attached to the back of the washer. (See "Electrical Requirements.") Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 5-100 psi (34.5-690 kPa).
- Page 3 The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 39 in. (99 cm) above the floor and no higher than 96 in. (244 cm) from the bottom of the washer. Floor drain system (view 2) The floor drain system requires a siphon break that may be purchased separately.
- Page 4 • final location. For a grounded, cord-connected This washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an...
- Page 5 (6 ram) from the end. 4. Open clamp. Twist hose back and forth while pushing down onto drain connector at the bottom of the washer. Continue until hose contacts the ribbed stop on the cabinet. Place clamp over area marked "CLAMR" Release clamp.
- Page 6 NOTE: Do not overtighten. Damage to the valves can result. Check for leaks 8. Turn on the water faucets and check for leaks. A small amount of water might enter the washer. You will drain this later. NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure.
- Page 7 Repeat steps 5 through 8 until washer is level. 9. After the washer is in the final location and level, use a %e in. (14 ram) open-end wrench to turn the nuts on the feet tightly against the washer cabinet.
- Page 8 Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it] For the replacement parts, accessories and ® Registered Trademark / TMTrademark / SMService Mark of Sears, Roebuck and Co., used under ticensee by Sears Canada. 10/02 ®...