EN GL I SH CORDLESS JIGSAW DC330 Congratulations! differ. This may significantly increase the exposure level over the total working You have chosen a D WALT tool. Years of period. experience, thorough product development and An estimation of the level of exposure to...
Keep children and bystanders away while operating a power tool. Distractions can DC330 cause you to lose control. WALT declares that these products described 2) ELECTRICAL SAFETY under “technical data” are in compliance with: Power tool plugs must match the outlet.
Page 9
EN GL I SH 3) PERSONAL SAFETY storing power tools. Such preventive safety measures reduce the risk of starting Stay alert, watch what you are doing and the power tool accidentally. use common sense when operating a power tool. Do not use a power tool while Store idle power tools out of the reach you are tired or under the influence of of children and do not allow persons...
ENGLIS H Additional Safety Rules for Jigsaws Markings on Tool • Hold power tool by insulated gripping The following pictograms are shown on the tool: surfaces when performing an operation Read instruction manual before use. where the cutting tool may contact hidden wiring or its own cord.
EN GL I SH SAVE THESE INSTRUCTIONS there is no battery pack in the cavity. Unplug charger before attempting to Chargers clean. • DO NOT attempt to charge the battery pack The DE9116/DE9130 chargers accept D WALT with any chargers other than the ones in NiCd and NiMH battery packs ranging from this manual.
ENGLIS H Hot/Cold Pack Delay CAUTION: When not in use, place tool on its side on a stable surface When the charger detects a battery that is too hot where it will not cause a tripping or or too cold, it automatically starts a Hot/Cold Pack falling hazard.
Battery Pack (fi g. A) BATTERY TYPE Do not incinerate the battery pack The DC330 operate on 18 volt battery packs. NiMH, NiCd+ and Li-Ion. Storage Recommendations Charges NiMH and NiCd 1. The best storage place is one that is cool and battery packs.
WARNING: Prior to assembly and adjustment, always remove the battery INTENDED USE pack. Always switch off the tool before Your DC330 jig saw is designed for professional inserting or removing the battery pack. cutting of wood, steel, aluminium, plastic and WARNING: Use only D WALT battery ceramic material at various work sites (i.e.,...
EN GL I SH A wide variety of dedicated saw blades is available Mounting and Removing the as an option. Anti-splinter Shoe Insert WARNING: Always select your saw (fi g. F1, F2) blade with great care. The anti-splinter shoe insert (18) which fits close to Setting the Bevel Angle (fi...
ENGLIS H OPERATION Switching On and Off (fi g. I) WARNING: Turn unit off and For safety reasons your tool is equipped with a disconnect battery pack before safety lock. installing and removing accessories, • To unlock the tool, release the safety lock (2). before adjusting or when making •...
EN GL I SH Sawing in Metal CHARGER CLEANING INSTRUCTIONS WARNING: Shock hazard. Disconnect • Mount an appropriate saw blade. the charger from the AC outlet before • Proceed as described above. cleaning. Dirt and grease may be CAUTION: Use a cooling lubricant removed from the exterior of the charger (cutting oil) to prevent overheating of the using a cloth or soft non-metallic brush.
ENGLIS H Local regulations may provide for separate collection GUARANTEE of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. WALT is confident of the quality of its products and offers an outstanding guarantee WALT provides a facility for the collection and for professional users of the product.
Page 19
Black & Decker - D WALT Tel: +32 (0)015 - 15 47 9211 België en Luxemburg Nieuwlandlaan 7, IZ Aarschot B156 Fax: +32 (0)015 - 15 47 9210 B-3200 Aarschot www.dewalt.be Danmark WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk...