Table of Contents
Advertisement
Note
For a DIGA Recorder / DVD Player / Blu-ray Disc Player / HD Video Camera / LUMIX Camera with
●
VIERA Link function, connect to HDMI1, HDMI2 or HDMI3 terminal via an HDMI cable.
●
For a Player theatre / Blu-ray Disc theatre / Amplifier, connect to HDMI1, HDMI2 or HDMI3 terminal via
an HDMI cable, and also connect an RCA cable for audio output from the TV.
Use a fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilised.
●
Recommended Panasonic's HDMI cable part number:
●
RP-CDHS15 (1.5 m)
●
Preparations
Connect the equipment supporting VIERA Link.
●
Set up the connected equipment. Read the manual of the equipment.
●
For optimal recording, the settings of the recorder may need to be changed. For details, read the
●
manual of the recorder.
Set [VIERA Link] to [On] in the Setup Menu
●
Set up the TV
●
After connection, turn the equipment on and then switch the TV on. Select the input mode to
HDMI1, HDMI2 or HDMI3 (p. 20), and make sure that an image is displayed correctly.
This setup should be done each time when the following conditions occur:
for the first time
●
Features available
Channel download
Channel settings can be downloaded to the recorder.
Easy playback
Automatic input switching - When connected equipment is operated, the input mode is switched
automatically.
[Power on link]
Set [Power on Link] to [On] in the Setup Menu to use this function
When the connected equipment starts playback or direct navigator / function menu for the equipment
are activated, the TV is automatically turned on. (Only when the TV is in Standby mode.)
[ Power off link]
Set [Power off Link] to [On] in the Setup Menu to use this function
When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.
This function will work even if the TV enters Standby mode automatically by auto power standby function.
●
[Standby Power Save]
Set [Standby Power Save] to [On] in the Setup Menu to use this function
The power consumption in Standby mode of the connected equipment is controlled higher or lower in
synchronisation with the TV On / Off state to reduce the consumption.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the
power consumption in Standby mode of the connected equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode, but the power
consumption is increased to make startup time early.
This function is effective if the connected equipment can change the power consumption in Standby
●
mode and is set to higher consumption.
This function will work when [Power off Link] is set to [On].
●
[Intelligent Auto Standby]
Set [Intelligent Auto Standby] to [On (With reminder)] or [On (No reminder)] in the Setup Menu to
use this function
When the TV is On, non-watched or non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input mode is switched from
HDMI or when [Speaker Selection] is changed to [TV] (except for watching a disc).
If you select [On (With reminder)], an on-screen message will be displayed before turning on this
●
function.
This function may not work properly depending on the connected equipment. If required, set to [Off].
●
54
TH_L42U30KMTX_EN.indd 54
TH_L42U30KMTX_EN.indd 54
RP-CDHS30 (3.0 m)
●
when adding or reconnecting equipment
●
- Reduce unnecessary power consumption in standby
- Auto standby for unnecessary equipment
[Intelligent Auto Standby] (p. 29)
RP-CDHS50 (5.0 m)
●
[VIERA Link] (p. 29)
when changing setup
●
[Power on Link] (p. 29)
[Power off Link] (p. 29)
[Standby Power Save] (p. 29)
3/21/2011 1:43:06 PM
3/21/2011 1:43:06 PM
Fe
[
Yo
Liv
T
●
If
●
th
a
If
●
Ac
OPT
■
(st
[
Re
If
●
c
a
If
●
Hide quick links:
Advertisement
Table of Contents
