4.15 Bluetooth module
4.15 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-31.
1. Disconnect the Bluetooth harness from the connector CN4440 on the system board.
2. Open the latches and remove the Bluetooth module from the guides.
3. Disconnect the Bluetooth harness from the connector on the Bluetooth module.
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813)
Bluetooth harness
Latch
Figure 4-31 Removing the Bluetooth module
4 Replacement Procedures
Bluetooth module
CN4440
Guide
[CONFIDENTIAL]
4-55