Related Manuals for DeWalt DC820-XE
Summary of Contents for DeWalt DC820-XE
- Page 1 INSTRUCTION MANUAL DC820-XE, DC830-XE, DW059-XE 13 mm (1/2") CORDLESS IMPACT WRENCHES DC825-XE, DC827-XE, DC835-XE, DC845-XE 6.35 mm (1/4") CORDLESS IMPACT DRIVERS...
-
Page 3: Definitions: Safety Guidelines
The term “power tool” in the warnings refers to your mains-operated (corded) power Definitions: Safety Guidelines tool or battery-operated (cordless) power tool. 1) WORK AREA SAFETY The definitions below describe the level of severity for each signal a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. word. -
Page 4: Electrical Safety
b) Use personal protective equipment. Always wear eye protection. Protective operation. If damaged, have the power tool repaired before use. Many equipment such as dust mask, non-skid safety shoes, hard hat, or hearing accidents are caused by poorly maintained power tools. protection used for appropriate conditions will reduce personal injuries. -
Page 5: Extension Cords
• Young children and the infirm. This appliance is not intended for use by WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety young children or infirm persons without supervision. Young children should be glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR supervised to ensure that they do not play with this appliance. -
Page 6: Important Safety Instructions For All Battery Packs
• The label on your tool may include the following symbols. The symbols and their DANGER: Electrocution hazard. Never attempt to open the battery pack for any definitions are as follows: reason. If battery pack case is cracked or damaged, do not insert into charger. Do not V .... -
Page 7: Important Safety Instructions For All Battery Chargers
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (LI-ION) • Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack. • Do not incinerate the battery pack even if it is severely damaged or is completely worn out. - Page 8 • An extension cord must have adequate wire size (AWG or American Wire 1. The red light will blink continuously indicating that the 1-hour charge cycle has Gauge) for safety. The smaller the gauge number of the wire, the greater the started.
-
Page 9: Charge Indicators
LEAVING THE BATTERY PACK IN THE CHARGER 2. Insert the battery pack into the charger. The red (charging) light will blink continuously indicating that the charging process has started. The charger and battery pack can be left connected with the red light glowing 3. -
Page 10: Storage Recommendations
Foreign materials of a conductive nature such as, but not limited to, steel wool, INTENDED USE aluminum foil, or any buildup of metallic particles should be kept away from These heavy-duty impact wrench/drivers are designed for professional impact charger cavities. Always unplug the charger from the power supply when there is screwdriving applications. - Page 11 Forward/Reverse Control Button (Fig. 3) FIG. 3 A forward/reverse control button (C) determines the direction of the tool and also serves as a lock off button. To select forward rotation, release the trigger switch and depress the forward/reverse control button on the right side of the tool. To select reverse, depress the forward/reverse control button on the left side of the tool.
-
Page 12: Maintenance
• Bolt Size: Larger bolt diameters generally require higher fastening torque. Fastening torque will also vary according to length, grade, and torque DC820-XE, DC830-XE, DW059-XE coefficient. Place the switch in the locked off (center) position or remove battery pack before •... -
Page 13: Three Year Limited Warranty
Recommended accessories for use with your tool are available at extra cost from sound mechanical and/or electrical condition. Normal wear parts are not covered in your local service center. If you need any assistance in locating any accessory, this service. Carbon brushes worn more then 50% will be replaced. please contact D WALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, NOTE: Three Year Warranty is not applicable to items deemed as consumables. - Page 16 20 Fletcher Road, Mooroolbark, VIC 3138 Australia (03 8720 5100) • 5 Te Apunga Place, Mt Wellington, New Zealand (09 259 1111) (NOV07) Form No. 652829-00 DC820-XE, DC825-XE, DC827-XE, DC830-XE, DC835-XE, DC845-XE, DW059-XE Copyright © 2007 D WALT The following are trademarks for one or more D WALT power tools: the yellow and black color scheme;...