Top Lanyard Bar LED Torch Navigation Button Button GRP/MENU(Menu/ (Push-To-Talk) Group) Button Button (Call) Button SEL/ (Select/Lock) MON (Monitor) Button Button Microphone Speaker DC IN 9V Jack Bottom Lanyard Bar Note : Radio depicted is T80 Extreme. Also applicable for T80 radio.
Installing the Battery 1. Make sure your radio is turned OFF. 2. For T80: To remove the battery compartment door, press the tab at the bottom of the compartment door. For T80 Extreme : To remove the battery compartment door, use a coin to wedge the battery door open.
68015000918_a_EN.fm Page 4 Thursday, October 11, 2012 3:15 PM 5. LED indicator will illuminate and remain illuminated as long 3. Additional presses of the SEL/ button or MENU/GRP as the radio is in the charger. button will advance you through the Menu. Note: Charge the battery pack for 14 hours.
Page 7
68015000918_a_EN.fm Page 5 Thursday, October 11, 2012 3:15 PM Select Menu Transmitting a Call Tone Your radio navigates through the Select Menu as follows: Your radio is equipped with 10 selectable call tones . To select a call tone: 1. MENU/GRP button to enter Common Menu. Advance to Normal Channel Sub-code...
68015000918_a_EN.fm Page 6 Thursday, October 11, 2012 3:15 PM Common Menu Your radio navigates through Common Menu as follows: ROOM TONE SLNT TIME Normal SCAN (Dual Watch) (Room Monitor) (Call Tone) (Silent) (Up Timer) (Power) Select the Select the Select the ON/ Sensitivity Channel and 1 - 10...
Page 9
68015000918_a_EN.fm Page 7 Thursday, October 11, 2012 3:15 PM Set Group Code Channel Setting in Group Mode to choose the Group Code. To set Auto Channel Change in Group Mode: 1. MENU/GRP to enter Group Mode. 2. SEL/ to complete Group Code setting. 2.
3. MENU/GRP or PTT to turn OFF Scan mode. answered, the backlight turns off and the blinks until there is Dual Watch Mode no signal. The T80/T80 Extreme radio will vibrate when there is Enables your to scan the current channel and another channel a missed call. alternately.
68015000918_a_EN.fm Page 9 Thursday, October 11, 2012 3:15 PM 2. Select “SLNT”. To turn the Monitor Mode ON: 1. Press the MON button for brief listening. The icon blinks. 3. SEL/ to select. 2. Press and hold the MON button for 2 seconds for continuous to turn Silent Mode ON.
Motorola. Furthermore, the product have been altered, deleted, removed, or made illegible. purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any What Is Not Covered By The Warranty license under the copyrights, patents or patent applications of •...