Miele HG05 Operating Instructions Manual
Miele hg05 dishwasher operating instructions
Hide thumbs
Also See for HG05:
- Operating instructions manual (116 pages) ,
- Operating instructions manual (112 pages) ,
- Operating instructions manual (104 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele HG05
Summary of Contents for Miele HG05
-
Page 1: Operating Instructions
To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is in‐ stalled and used for the first time. en-GB HG05 M.-Nr. 09 645 540... -
Page 2: Table Of Contents
Contents Guide to the appliance................... 5 Appliance overview....................5 Control panel......................6 Display ........................7 Warning and Safety instructions ................8 Caring for the environment ................. 17 Disposal of the packing material................17 Disposing of your old appliance ................17 Energy saving washing .................. - Page 3 Contents Energy management ....................45 At the end of a programme ..................46 Switching off ......................47 Unloading the dishwasher ..................47 Interrupting a programme ..................48 Changing a programme ..................48 Programme options ..................... 49 Extras ........................49 DetergentAgent ...................... 50 Delay start with EcoStart ..................
- Page 4 Contents Electrical connection ................... 80 Electrical connection U.K..................80 Plumbing ....................... 81 The Miele waterproof anti-leak system ..............81 Connection to the water supply................81 Drainage......................... 83 Technical data ...................... 84 Settings menu ...................... 85 To open the Settings menu ..................85 Language ......................
-
Page 5: Guide To The Appliance
Guide to the appliance Appliance overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual compartment detergent dis‐ penser e Air inlet for drying (depending on model) -
Page 6: Control Panel
Guide to the appliance Control panel a On/Off sensor e Back sensor For switching the dishwasher on and For navigating back to the previous off. menu or deleting values which have been set previously. b TimeControl in-operation indicator lights f OK sensor For displaying programme time re‐... -
Page 7: Display
Guide to the appliance Display The scroll bar on the right of the dis‐ play indicates that more options or General more text are available which can be displayed by touching the relevant ar‐ The display is used to select or set the row sensor . -
Page 8: Warning And Safety Instructions
Keep the installation plan and the operating instructions in a safe place and pass them on to any future owner. Miele cannot be held liable for damage caused by non-compli‐ ance with this information. - Page 9 Warning and Safety instructions Correct application This dishwasher is intended for use in domestic households and similar working and residential environments. The dishwasher is not intended for outdoor use. It must only be used as a domestic appliance as specified in these operating instructions, for cleaning domestic crockery and cutlery.
- Page 10 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the appli‐ ance unless they are constantly supervised. Children 8 years and older may only use the dishwasher unsuper‐ vised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
- Page 11 Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re‐ pairs must only be carried out by a Miele authorised technician. A damaged dishwasher is dangerous. Check it for any recognisa‐ ble damage. Never install or attempt to use a damaged appliance.
- Page 12 30 and 1000 kPa (0.3 and 10 bar). If the dishwasher gets damaged, switch it off at the mains imme‐ diately and call your Miele Dealer or the Miele Service Department. While the appliance is under guarantee, repairs should only be un‐...
- Page 13 During installation, maintenance and repair work, the appliance must be disconnected from the mains electricity supply. If the connection cable is damaged it must be replaced with a special cable of the same type (available from Miele) by a Miele au‐ thorised service technician only.
- Page 14 Warning and Safety instructions Correct installation The dishwasher must be installed and connected in compliance with the installation diagram supplied. Take care, both before and during installation of the dish‐ washer, not to cut yourself on the metal parts. Danger of in‐ jury.
-
Page 15: Correct Use
Warning and Safety instructions Correct use Do not use solvents in the dishwasher. Danger of explosion. Do not inhale or ingest dishwasher detergent. Dishwasher deter‐ gents contain irritant or corrosive ingredients which can cause burn‐ ing in the nose, mouth and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or inhaled. - Page 16 Please observe the information given in "Technical data" regard‐ ing the capacity of the dishwasher. Accessories Only use genuine original Miele accessories and spare parts with this dishwasher. Using accessories or spare parts from other manu‐ facturers will invalidate the guarantee, and Miele cannot accept lia‐ bility.
-
Page 17: Caring For The Environment
Caring for the environment Disposal of the packing mate‐ Disposing of your old appli‐ rial ance The packaging is designed to protect Electrical and electronic appliances of‐ the appliance from damage during ten contain valuable materials. They al‐ transportation. The packaging materials so contain materials which, if handled used are selected from materials which or disposed of incorrectly, could be po‐... -
Page 18: Energy Saving Washing
Caring for the environment Energy saving washing This dishwasher is exceptionally eco‐ nomical in its use of water and electrici‐ You can make the most of your appli‐ ance by following these tips: – For most economical dishwashing, make full use of the baskets without overloading the dishwasher. -
Page 19: Ecofeedback Consumption Indicator
Caring for the environment EcoFeedback consumption in‐ 2. Actual consumption dicator At the end of the programme you can call up the actual amount of energy and function is used for Consumption water used by the programme which calling up information about the energy has just been run. -
Page 20: Before Using For The First Time
Before using for the first time Opening the door Water in the dishwasher may be hot. Danger of scalding. This dishwasher has a motorised door opener which is activated by knocking Only open the door during operation on the door front ("Knock2open func‐ if absolutely necessary and exercise tion"). -
Page 21: Emergency Door Opener
Before using for the first time Emergency door opener If the door will not open when knocked or if there is a power cut the door can be opened manually with the Knock2open mechanism supplied with the dishwasher. Then use it to pull the door open. Closing the door ... -
Page 22: Basic Settings
Before using for the first time Basic settings Time The display will then change to the Open the door. screen for setting the time. Switch the dishwasher on using the The time of day needs to be set before ... - Page 23 Before using for the first time Water hardness The message Set-up successfully comple- will then appear in the display. The display will change to the screen for setting the water hardness. After confirming this with , the prompts and Insufficient salt Insuffi- –...
-
Page 24: Before Using The Appliance For The First Time, You Require
Before using for the first time Before using the appliance for If the water in your area is very soft the first time, you require: and constantly lower than 0.9 mmol/l (5 °d - German scale) you do not – approx. 1 kg dishwasher salt, have to add dishwasher salt. -
Page 25: Adding Salt
Before using for the first time Adding salt Do not fill the reservoir with water. When filling the salt reservoir only open the door halfway to ensure that all the salt gets into the reservoir. Add salt only until the reservoir is full or until water runs out of the opening. -
Page 26: Add Salt Reminder
Before using for the first time Add salt reminder If you only ever use combination prod‐ ucts containing salt and rinse aid in Fill the salt reservoir with dishwasher your dishwasher, you can switch the salt for reactivation when Insuffi- reminders off if you wish (see "Set‐... -
Page 27: Rinse Aid
Before using for the first time Rinse aid If you only ever use combination products containing rinse aid in your Rinse aid is necessary to ensure water dishwasher, you do not need to add does not cling and leave marks on rinse aid. -
Page 28: Add Rinse Aid Reminder
Before using for the first time Add rinse aid reminder When the mes‐ Insufficient rinse aid sage appears, the reservoir contains sufficient rinse aid for 2 - 3 programmes only. Add rinse aid in plenty of time. Confirm with OK. The message will go out. -
Page 29: Loading The Dishwasher
Loading the dishwasher Notes – The spray arms must not be blocked by items which are too tall or hang Remove coarse food residues from through the baskets. If in doubt, test crockery. for free movement by manually rotat‐ ing the spray arms. There is no need to rinse items under running water. - Page 30 (e.g. Riedel glassware). Please note – Use detergents with glass protective additives (e.g. Miele CareCollection Silverware previously cleaned with a tabs). silver polish may still be damp or spot‐ ted at the end of a programme, where –...
-
Page 31: Upper Basket
Loading the dishwasher Upper basket Cup rack Raise the rack upwards to make See "Loading the dishwasher / Load‐ room for tall items. ing examples" for examples of how to Glasses can be arranged along the cup load crockery and cutlery. rack for support during the programme. - Page 32 Loading the dishwasher Jumbo cup rack (depending on model) You can also move one of the side in‐ serts of the cutlery tray to make more The cup rack can be set at two different room for tall glasses. widths so that it can also accommodate large cups.
-
Page 33: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket Depending on the setting of the upper basket, the following plate dimensions In order to gain more space for taller can be accommodated. pieces of crockery in the lower or upper basket, the upper basket can be adjus‐ Dishwashers with cutlery basket ted on three levels with 2 cm between (see data plate for model number) -
Page 34: Lower Basket
Loading the dishwasher Lower basket Removable MultiComfort insert The rear section of the lower basket is See "Loading the dishwasher / Load‐ used for washing cups, glasses, plates ing examples" for examples of how to and pots. load crockery and cutlery. You can remove the MultiComfort insert ... - Page 35 Loading the dishwasher Glass rack Glass rail The glass rack can be raised to make This rail is designed to hold tall glasses more room for tall items. and glasses with stems securely. Stem glassware, e.g. wine glasses or champagne flutes, can be leaned against the glass rack or suspended from it.
- Page 36 Loading the dishwasher Hinged spikes Bottle holder The spikes at the front are used for The bottle holder can be used to wash washing plates, soup bowls, platters, narrow items, e.g. milk and baby bot‐ desert bowls, and saucers. tles. Both rows of spikes can be lowered to make more room for large items, e.g.
-
Page 37: Cutlery
Loading the dishwasher Cutlery 3D cutlery tray (depending on model) See "Loading the dishwasher / Load‐ ing examples" for examples of how to load crockery and cutlery. Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. -
Page 38: Loading Examples
Loading the dishwasher Loading examples Dishwashers with cutlery tray Upper basket Lower basket... - Page 39 Loading the dishwasher Cutlery tray Heavily soiled items...
-
Page 40: Operation
For optimum cleaning and drying re‐ remove coloured stains (e.g. tea, cof‐ sults, use Miele dishwasher detergent fee, tomato sauce). and add Miele salt and Miele rinse aid separately. See "Optional accesso‐ Most dishwasher detergents are mildly ries". alkaline and contain enzymes and oxy‐... - Page 41 Operation Detergent dosage Dishwasher detergents contain Follow the dosage recommended by irritant or corrosive ingredients which the manufacturer on the packaging. can cause burning in the nose, mouth and throat if swallowed, or in‐ Unless directed otherwise, use one hibit breathing.
-
Page 42: Adding Detergent
Operation Adding detergent Add the required amount of detergent and close the flap. Press the opening catch on the de‐ tergent dispenser. The flap will spring Make sure that the detergent packag‐ open. ing is properly closed after use to avoid it getting damp and clumping The flap is always open at the end of a together. -
Page 43: Switching On
Operation Switching on Selecting a programme Open the stopcock, if it is closed. Choose your programme according to the type of load and how dirty it is. Open the door. The different programmes and their Make sure the spray arms can rotate uses are described in the Programme freely. -
Page 44: Starting The Programme
Operation Starting the programme Display Start the programme by closing the The estimated duration of the pro‐ door. gramme selected appears in hours and minutes in the display before the pro‐ The TimeControl indicator will light up gramme begins. During the programme, to let you know the programme has the time left until the end of the pro‐... -
Page 45: Timecontrol
Operation TimeControl Energy management The TimeControl indicator light lets you To save energy, the dishwasher will know how much longer the programme switch off automatically 10 minutes af‐ has to run with the door shut. ter the last time a sensor has been pressed or after the end of the pro‐... -
Page 46: At The End Of A Programme
Operation At the end of a programme If you have deactivated the auto‐ matic door opening function (see At the end of a programme, the Time‐ "Settings menu, AutoOpen"), but Control indicator light will go out with would still like to open the door at the door shut. -
Page 47: Switching Off
Operation Switching off Unloading the dishwasher At the end of a programme: Dishes tend to break and chip more easily when they are hot. Allow the Open the door. dishes to cool until they are comforta‐ ble enough to handle before unloading ... -
Page 48: Interrupting A Programme
Operation Interrupting a programme Changing a programme A programme is interrupted as soon as If the detergent dispenser flap has the door is opened. already opened, do not change the If the door is closed again, the pro‐ programme. gramme will continue from the point it was at before the door was opened. -
Page 49: Programme Options
Programme options Extras Selecting the Extra with the Quick Short wash programme results in a wash cy‐ You can select Extras for the pro‐ cle without drying and without automat‐ gramme you have selected. ic door opening. Open the door. Energy save ... -
Page 50: Detergentagent
Programme options Soak DetergentAgent Extra is used for soaking Soak For optimum cleaning results, the dish‐ crockery with dried on soiling. washer automatically adjusts the pro‐ gramme sequence to the type of deter‐ Energy and water consumption will in‐ gent being used. Depending on the crease with this Extra. -
Page 51: Delay Start With Ecostart
Programme options Delay start with EcoStart You then have a choice of Start at Finish EcoStart There are three ways of starting the Select the one you want. programme by means of delaying the start. You can set the start time or the Now enter the time you want. - Page 52 Programme options Start at Finish at With the function, you set the With the function, you set the Start at Finish at exact time you want the programme to time you wish the programme to end at. start at. Use the arrow sensors to set the ...
- Page 53 Programme options EcoStart Changing or deleting set times function allows you to take You can change the set times or the EcoStart advantage of time variable economy programme before the start time in the rates of electricity. Before you can use display is reached.
-
Page 54: Programme Overview
Programme overview Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C Sensor wash Variable programme sequence, sensor-controlled adjustment according to the amount of crockery and level of food deposits 47-65 required required Normal 55 °C Intensive 75 °C Sensor wash gentle ... - Page 55 Programme overview Consumption Duration Energy Water Cold water Hot water Litres Cold water Hot water 15 °C 55 °C 15 °C 55 °C h:min h:min 0.84 0.49 3:19 3:09 1:25-2:45 1:20-2:35 0.70 -1.30 0.50 -0.85 -16.0 1.10 0.70 14.0 1:59 1:47 1.45 0.95...
- Page 56 Programme overview Crockery Food deposits Action required Variable, sensor-controlled Mixed, programme sequence All normal food deposits everyday crockery Shorter duration This needs a short programme Heat-sensitive glasses and plastic Shorter duration Fresh, easily removed food deposits This needs a gentle programme with glass care Shorter duration Mixed crockery...
- Page 57 Programme overview Programme Detergent Compartment I Compartment II 25 ml Sensor wash 1 tab +short 20 ml Quick wash 40 °C 1 tab +short 20 ml Sensor wash gentle 1 tab +short 25 ml Extra quiet 1 tab 25 ml 1 tab +short 25 ml...
-
Page 58: Further Programmes
Programme with long soak phase incor‐ wash cabinet using care products such porated for mixed loads of crockery, as Miele's dishwasher cleaner or condi‐ pots and pans and robust porcelain. tioner (see "Optional accessories / This programme is particularly suitable Dishwasher care products). -
Page 59: Cleaning And Care
Cleaning the reflector panel washer cleaner or conditioner (available from Miele). Follow the instructions on The reflector panel for the In-operation the packaging. indicator light is situated in the cover‐... -
Page 60: Cleaning The Door Front
Cleaning and care Cleaning the door front To avoid damaging the external sur‐ faces, do not use: Soiling that is left too long might – cleaning agents containing soda, become impossible to remove and ammonia, acids or chlorides, could cause the external surfaces to –... -
Page 61: Checking The Filters In The Wash Cabinet
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it access‐ ing the circulation system and re-enter‐ ing the cabinet through the spray arms. - Page 62 Cleaning and care To clean the inside of the filter, the flap Replace the filter combination so that must be opened: it lies flat in the base of the wash cabinet. Press catches together in the di‐ rection of the arrows as shown, and ...
-
Page 63: Cleaning The Spray Arms
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Switch the dishwasher off. Remove the spray arms as follows: ... -
Page 64: Problem Solving Guide
Reset the trip switch in the mains fuse box or re‐ place the fuse in the plug (minimum fuse rating - see data plate). If the mains fuse trips again, call the Miele Service Department. After the programme The reflector panel was not correctly fitted. - Page 65 Select the programme you want. Close the door. If the fault message appears again, there is a techni‐ cal fault. Call the Miele Service Department. The Waterproof system has reacted. Waterproof fault Close the stopcock.
- Page 66 Problem solving guide Problem Cause and remedy All in-operation indica‐ Before rectifying the problem: tors are flashing quick‐ Switch the dishwasher off with the button. The warning buzzer is sounding. One of the following faults is shown in the display: The door is sometimes obstructed by an item inside Fault auto.
-
Page 67: Water Inlet Fault
Problem solving guide Water inlet fault Problem Cause and remedy All in-operation indica‐ tors are flashing quick‐ The warning buzzer is sounding. One of the following faults is shown in the display: The stopcock is closed. Water inlet fault. Please open the stopcock ... -
Page 68: Water Drainage Fault
Problem solving guide Water drainage fault Problem Cause and remedy All in-operation indica‐ Before rectifying the problem: tors are flashing quick‐ Switch the dishwasher off with the button. The water outlet is restricted. The warning buzzer is There might be water in the wash cabinet. sounding. -
Page 69: General Problems
Problem solving guide General problems Problem Cause and remedy The door will not open function has been permanently disa‐ Knock2open when knocked. bled. Switch the door opening mechanism on again (see "Settings, Knock2open"). If the door will still not open or if there is a power cut the door can still be opened with the door opening device supplied (see "Before using for the first time, Door opening mechanism"). - Page 70 Problem solving guide Problem Cause and remedy Water remains in the Before rectifying the problem: wash cabinet at the end Switch the dishwasher off using the sensor. of a programme. The filter combination in the wash cabinet is clogged. ...
-
Page 71: Noises
Problem solving guide Noises Problem Cause and remedy Knocking noise in the A spray arm is knocking against an item in a basket. wash cabinet. Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the Items of crockery are insecure in the wash cabinet. -
Page 72: Unsatisfactory Washing Result
Problem solving guide Unsatisfactory washing result Problem Cause and remedy The dishes are not The dishes were not loaded correctly. clean. See notes in "Loading the dishwasher". The programme was not powerful enough. Select a more powerful programme (see "Pro‐ gramme chart"). - Page 73 Problem solving guide Problem Cause and remedy Crockery is not dry or The rinse aid dosage is set too low or the rinse aid cutlery and glasses are reservoir is empty. flecked. Replenish the reservoir, increase the dosage or change the brand of rinse aid (see "Before using for the first time, Rinse aid").
- Page 74 Problem solving guide Problem Cause and remedy White residue is visible The rinse aid dosage is set too low. on crockery and cut‐ Increase the dosage (see "Settings menu, Rinse lery, clouding occurs on aid"). glassware; film can be There is no salt in the salt reservoir.
-
Page 75: Maintenance
Replace the filter and seal, making ion. sure they are sitting correctly. This filter is available from Miele. Reconnect the inlet hose to the stop‐ cock, making sure it goes on correct‐ Cleaning the filter: ly and is not cross-threaded. -
Page 76: Cleaning The Drain Pump And Non-Return Valve
Maintenance Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Disconnect the dishwasher from the mains supply. -
Page 77: After Sales Service
The latest version of this leaflet can be – the Miele Service Department ordered by email from: – testinfo{miele.de Contact details for Miele are given at the back of this manual. N.B. A call- Please quote your postal address, as out charge will be applied to service... -
Page 78: Optional Accessories
Dishwasher detergent, rinse – with enzymes which are effective aid and salt even in low temperature programmes When you decided to buy a Miele dish‐ – with glass protection against corro‐ washer you chose excellent quality and sion performance. However, ensuring that... - Page 79 Optional accessories Dishwasher care products Accessories Miele cleaning and care products pro‐ Some accessories may be supplied as vide optimum care for your dishwasher. standard, depending on model. Dishwasher cleaner Cappuccinatore insert – cleans the dishwasher effectively and The Cappuccinatore insert can be used...
-
Page 80: Electrical Connection
Electrical connection Electrical connection U.K. This appliance must not be used with so-called energy saving devices. These reduce the energy supply to the appli‐ All electrical work must be car‐ ance which could then become too ried out by a suitably qualified and warm. -
Page 81: Plumbing
As long as your dishwasher has been Water in the dishwasher must installed correctly, the Miele waterproof not be used as drinking water. anti-leak system will protect you from water damage. – The dishwasher may be connected to a cold or hot water supply, max. - Page 82 Plumbing – The inlet hose is approx. 1.5 m long. After connecting the dishwasher to A 1.5 m long flexible metal extension the water supply, check that all hose, pressure tested to 14000 plumbing connections are watertight. kPa/140 bar) is available as an op‐ tional accessory, if required.
-
Page 83: Drainage
Plumbing Drainage Venting the drainage system If the on-site drain connection is situ‐ – The appliance drainage system is fit‐ ated lower than the guide path for the ted with a non-return valve, which bottom basket rollers in the open door, prevents dirty water from flowing the drainage system must be vented. -
Page 84: Technical Data
Technical data Dishwasher model Standard Height 80.5 cm 84.5 cm (adjustable + 6.5 cm) (adjustable + 6.5 cm) Height of building-in recess Min. 80.5 cm (+ 6.5 Min. 84.5 cm (+ 6.5 Width 59.8 cm 59.8 cm Width of building-in recess 60 cm 60 cm Depth... -
Page 85: Settings Menu
Settings menu Settings menu for changing Select the option. Settings standard settings The display will change to show the menu. Settings To open the Settings menu Select the option you want to Switch the dishwasher on with the change. -
Page 86: Language
Settings menu Language Time The current time of day must be set be‐ The display can be set to appear in one fore you can use the option. of several different languages. Delay start You can change the language in the Setting the clock format display via the sub-menu. -
Page 87: Water Hardness
Settings menu Water hardness °d mmol/l °f Display Your dishwasher is fitted with a water softener which you need to programme to the water hardness level in your area. – The dishwasher must be program‐ med to the correct water hardness for your area. -
Page 88: Rinse Aid
Settings menu Rinse aid Consumption (EcoFeedback) You can adjust the rinse aid dosage for You can programme the dishwasher so best results. that the energy and water consumption The rinse aid dosage can be set from of the currently selected programme approx. -
Page 89: Sensor Wash
Settings menu Sensor wash Knock2open You can adjust the pro‐ You can choose whether the door Sensor wash gramme so that it will remove stubborn should open with 1 or 2 knocks. soiling in a lightly soiled load. Select the setting you want and con‐ ... -
Page 90: Optimise Standby
Settings menu Optimise standby Refill reminders The dishwasher is supplied with the If you only ever use combination prod‐ function set as standard. ucts containing salt and rinse aid in timise standby your dishwasher, you can switch the re‐ To save energy the dishwasher will minders for salt and rinse aid off if you switch off automatically a few minutes wish (see "Settings menu - Refill re‐... -
Page 91: Change Main Menu
Settings menu Change main menu Save extras You can change the order of the pro‐ Additional programme options can be grammes in the programme selection added to some programmes, e.g. Short menu and also enter your favourite pro‐ (see "Programme options, Extras"). grammes into the first two programme You can use the option to... -
Page 92: Volume
Settings menu Volume Night time You can select the times for night time A sequence of audible tones will sound to begin and end. at the end of the programme or if there is a fault as long as the buzzer has ... -
Page 93: Memory
Settings menu Memory Version info With the Memory function activated, You can call up the electronic software the dishwasher will save the last pro‐ version of your dishwasher for technical gramme selected. When you switch the support purposes. dishwasher off and back on again, the ... -
Page 94: Ecostart
Settings menu EcoStart Setting the electricity tariff times Before you can use the option, EcoStart In order to run your dishwasher in the you must set at least one electricity tar‐ most economical way, you can use the iff time. option to take advantage of EcoStart your electricity supplier's time variable... - Page 95 Settings menu Changing the electricity tariff times Deleting the electricity tariff times You can change the start, finish or pri‐ You can delete the settings for an ority of a electricity tariff time. electricity tariff time and in doing so deactivate the option for this EcoStart...
-
Page 96: Showroom Programme
Settings menu Showroom programme Factory default You can reset all settings to the factory For demonstration purposes only. default settings. The dishwasher is equipped with vari‐ You will be given the choice of Appliance ous demo programmes for showroom settings reset Main menu use. - Page 100 G 6990 / G 6995 en-GB M.-Nr. 09 645 540 / 04...