[Aerial Photo]/ [Pin Hole]; [Film Grain]/ [High Dynamic] - Panasonic Lumix DMC-TZ10 Operating Instructions Manual
Operating instructions for advanced features
Hide thumbs
Also See for Lumix DMC-TZ10:
- Operating instructions manual (89 pages) ,
- Basic operating instructions manual (17 pages) ,
- Operating instructions manual (178 pages)
Table of Contents
Advertisement
Taking pictures according to the scene
(Continued)
[SCENE MODE]
Recording Mode:
Scene
Uses, Tips
Takes clear pictures of fireworks in the night
sky.
Tips
• Stand at least 10 m (32.8 feet) away.
• Tripod recommended.
[FIREWORKS]
Brings out the clear blues of the sky and the
sea without darkening subject.
[BEACH]
Brings out the natural colour of snow in ski
slope and mountain scenes.
[SNOW]
Takes pictures of the view from aircraft
windows.
Tips
• Angle the camera towards areas of contrasting
[AERIAL
colours when aligning the focus.
PHOTO]
• Check that the interior of the aircraft is not
reflected in the window.
• Stand at least 5 m (16.4 feet) away.
Darkens the area around the screen for a
retro effect.
Tips
• Focus (same as macro recording)
Max. W: 3 cm (0.10 feet) and above
[PIN
Max. T: 1 m (3.28 feet) and above
(5 × to 8 × is 2 m to ∞)
HOLE]
68
VQT2R48
Notes
• Shutter speed can be set to 1/4
second or 2 seconds (if there is
a little jitter or if Optical Image
Stabilizer is [OFF]). (when not
using Exposure Compensation)
• Main fixed settings:
[FLASH]:
[FORCED FLASH
OFF]
[SENSITIVITY]: ISO80
[PRE AF]: [OFF]
[AF ASSIST LAMP]: [OFF]
• [AF MODE] default setting is
(Face Detection).
• Do not touch camera with wet
hands.
• Beware of sand and sea water.
• Battery life is reduced in lower air
temperatures.
• Main fixed settings:
[FLASH]:
[FORCED FLASH
OFF]
[AF ASSIST LAMP]: [OFF]
• Turn the camera off when
taking off or landing.
• When using the camera, follow
all instructions from the cabin
crew.
• The Face Detection function
(→99) may not work properly in
the darkened area around the
screen.
• [I.RESOLUTION] is fixed to
[OFF].
• The following functions cannot
be used:
Extra Optical Zoom/
[DIGITAL ZOOM]/[AUTO
BRACKET]/[MULTI ASPECT]/
[BURST]
How to select a scene (→61)
Using flash in Scene Modes (→48)
Scene
Uses, Tips
Produces black and white pictures with a
grainy texture.
Tips
[FILM
• Focus (same as macro recording)
Max. W: 3 cm (0.10 feet) and above
GRAIN]
Max. T: 1 m (3.28 feet) and above
(5 × to 8 × is 2 m to ∞)
Reduces over- and underexposure when
recording into the light and in night scenes.
Use ▲▼ to select the effect and press
[MENU/SET].
STD
Natural colouring effect
An impressionistic effect emphasizing
ART
contrast and colour
[HIGH
B&W Monochrome effect
DYNAMIC]
• You can also change the settings in the Quick
menu. (→112)
Tips
• Focus (same as macro recording)
Max. W: 3 cm (0.10 feet) and above
Max. T: 1 m (3.28 feet) and above
(5 × to 8 × is 2 m to ∞)
Notes
• Main fixed settings:
[SENSITIVITY]: ISO1600
• The following functions cannot
be used:
[DIGITAL ZOOM]/[AUTO
BRACKET]/[MULTI ASPECT]/
[BURST]
• When the camera is set to
[STABILIZER] and there is very
little jitter, or if [STABILIZER] is
set to [OFF], shutter speed may
slow down up to 8 seconds.
• The following function is fixed:
[SENSITIVITY]: 400
• Depending on recording
conditions, the correction effect
may not work.
• After recording, the shutter may
stay closed (up to 8 seconds) to
process the signal. This is not a
defect.
• Because dark areas are
corrected to be lighter, there may
be more noticeable noise on the
LCD screen than with ordinary
recording.
69
VQT2R48
- Quick Links:
- Charging Battery
Hide quick links:
Advertisement
Table of Contents
