Ozone Safety - Epson EPL-N2050+ Setup Manual

Hide thumbs Also See for EPL-N2050+:

Table of Contents

Ozone Safety

Ozone emission

Ozone gas is generated by laser printers as a by-product of the

printing process. Ozone is produced only when the printer is

printing.

Ozone exposure limit

The recommended exposure limit for ozone is 0.02 parts per

million (ppm) expressed as an average time-weighted

concentration over an eight (8) hour period.

The EPL-N2050+ laser printer generates less than 0.002 ppm for

2 hours of continuous printing in a closed room of approximately

29.8 m³.

Minimize exposure risk

To minimize the risk of exposure to ozone:

Do not use more than one laser printer in a confined area (see

Ozone exposure limit above).

Do not use your printer in conditions of extremely low

humidity.

Do not use your printer in a room with poor ventilation.

Avoid long, continuous printing in any of the conditions

mentioned above.

Printer location

The printer should be located so that the exhaust gases and

generated heat are:

Not blown directly into the user's face

Vented directly out of the building whenever possible

Safety Information

Table of Contents