hit counter script
Craftsman 919.728000 Owner's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Air Compressor
  5. 919.728000
  6. Owner's manual
Craftsman 919.728000 Owner's Manual

Craftsman 919.728000 Owner's Manual

Tank mounted air compressor
Hide thumbs Also See for 919.728000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
S£ S
CRAFTSMAN
Model No.
919.728000
IMPORTANT:
Read the Safety Guidelines
and All Instructions Carefully
Before Operating
OWNERS MANUAL FOR
CRAFTSMAN
TANK MOUNTED
AIR COMPRESSOR
SAFETY
GUIDELINES
ASSEMBLY
OPERATION
MAINTENANCE
TROUBLESHOOTING
REPAIR PARTS
Record in the spaces provided.
(1)
The Model Number can be found on the
maintenance
label on top of the motor
shroud or on the bar code label on the
rear of air tank.
(2)
The Date Code Number can be found on
the bar code label on the rear of the air
tank.
(3)
The Serial Number can be found on the
bar code label on the rear of the tank.
(4)
The Tank Registration Number is located
on the metal data plate which is welded
onto the backside of the air tank. (This
data plate is painted the same color as the
tank.)
Retain these numbers for future reference.
Model No
Serial No
Date Code
Tank Registration
No
D21245
Rev. 0
6/29/00
Sold
by Sears
Canada,
Inc.,
Toronto,
Ont.
M5B
2B8

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 919.728000

Summary of Contents for Craftsman 919.728000

  • Page 1 S£ S CRAFTSMAN OWNERS MANUAL FOR CRAFTSMAN Model No. TANK MOUNTED 919.728000 AIR COMPRESSOR Record in the spaces provided. The Model Number can be found on the maintenance label on top of the motor shroud or on the bar code label on the rear of air tank.
  • Page 2 If this air compressor is used for commercial or rental purposes, the warranty will apply for ninety days (90) from the date of purchase. This Craftsman Air Compressor warranty gives you specific legal rights and you may have other rights...

  • Page 3: Risk Of Explosion

    SAVE THESE INSTRUCTIONS IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. RISK OF EXPLOSION OR FIRE WHAT CAN HAPPEN HOW TO PREVENT IT IT IS NORMAL FOR ELECTRICALCONTACTS WITHINTHE ALWAYS OPERATE THE COMPRESSOR IN A WELL VENTI-...
  • Page 4 RISK FROM FLYING OBJECTS WHAT CAN HAPPEN HOW TO PREVENT THE COMPRESSED AIR STREAM CAN CAUSE SOFT TISSUE ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES DAMAGE TO EXPOSED SKIN AND CAN PROPEL DIRT, CHIPS, WITH SIDE SHIELDS WHEN USING THE COMPRESSOR. LOOSE PARTICLES AND SMALL OBJECTS AT HIGH SPEED, NEVER POINT ANY NOZZLE OR SPRAYER TOWARD ANY RESULTING IN PROPERTY DAMAGE OR PERSONAL INJURY.
  • Page 5 RISK FROM MOVING PARTS WHATCANHAPPEN HOW TO PREVENT MOVING PARTS SUCH AS THE PULLEY, FLYWHEEL AND BELT NEVER OPERATE THE COMPRESSOR WITH GUARDS OR CAN CAUSE SERIOUS INJURY IF THEY COME INTO CONTACT COVERS WHICH ARE DAMAGED OR REMOVED. WITH YOU OR YOUR CLOTHING. ATTEMPTING TO OPERATE COMPRESSOR WITH DAMAGED...
  • Page 6 An air line filter is usually required for removal of You have purchased an air compressor unit consisting of an aluminum 2 cylinder, single-stage air compressor moisture and oil vapor in compressed air when a paint pump (with cast iron sleeves), an air tank, wheels, spray gun is used.
  • Page 7 Air Compressor Pump: To compress air, the piston Regulator: The air pressure coming from the air tank is moves up and down in the cylinder. On the downstroke, controlled by the regulator. The regulator control knob is air is drawn in through the air intake valves. The exhaust a vibration proof design.
  • Page 8 Rotate each retaining clip clockwise and press down until it snaps into place over the pull handle It may be necessary to brace or support one (Fig. 4). end of the outfit when attaching the wheels If the handle has excessive movement, it is improp- because the air compressor...
  • Page 9 Location of the Air Compressor been installed and grounded in accordance with all local codes and ordinances. The outlet must have the Operate the air compressor in a clean, dry and well same configuration as the plug. DO NOT USE AN ventilated area.

  • Page 10: Break-In Procedures

    can gather and freeze. Apply pressure before under- ground lines are covered to make sure all pipe joints Certain air compressors can be converted from are free of leaks. 120V to 240V operation. When converting an Connect the piping to the 3/8" NPT air outlet opening air compressor to 240V operation,...
  • Page 11 Turn the "AUTO/O" lever to "AUTO" and allow tank Before attaching air hose or accessories, make sure the "AUTO/O" lever is set to "O" and the air pressure to build. Motor will stop when tank regulator is closed. pressure reaches "cut-out" pressure.

  • Page 12: Maintenance

    UNIT CYCLES AUTOMATICALLY WHEN POWER IS ON. WHEN DOING MAINTENANCE, YOU MAY BE EXPOSED TO VOLTAGE SOURCES, COMPRESSED AIR OR MOVING PARTS. PERSONAL INJURIES CAN OCCUR. BEFORE PERFORMING ANY MAINTENANCE OR REPAIR, UNPLUG THE COMPRESSOR AND BLEED OFF ALL AIR PRES- SURE.

  • Page 13: Adjust Belt Tension

    NOTE Belt- Replacement If the overload protector shuts the motor off frequently, check for a possible voltage SERIOUS INJURY OR DAMAGE MAY OCCUR IF problem. Low voltage can also be sus- PARTS OF THE BODY OR LOOSE ITEMS GET pected when: CAUGHT IN MOVING PARTS.

  • Page 14: Storage

    Protect the electrical cord and air hose from Storage damage (such as being stepped on or run over}. Review the "Maintenance" section on the preced- Wind them loosely around the outfit handle. ing pages and perform scheduled maintenance Store the compressor in a clean and dry location.
  • Page 15 PROBLEM CAUSE CORRECTION If there is an excessive amount of pressure It is normal for some pressure drop Pressure reading on the regu- drop when the accessory is used, adjust the Occur. lated pressure gauge drops when regulator. an accessory is used.
  • Page 16 PROBLEM CAUSE CORRECTION Check the accessory air requirement. If it is higher Compressor is not supply- Compressor is not large enough ing enough air to operate than the SCFM or pressure supplied by your air for air requirement. accessories. compressor, you need a larger compressoE Restricted air intake filter.
  • Page 17 17-- ENG D21245 R ev. 0 6/29/00...
  • Page 18 (_39 £)21245 Rev. 0 6/29/00 18 -- ENG...
  • Page 19 10" wheel (2 used) SSF-8080-ZN Lock nut (2 used) SS-2707 Drain cock H-2101 Adapter Z_TA-4336 Air tank, 30 gallon ASME Sears Craftsman label LA-3069 CAC-287 Pivot pin Z-MO-3019-2 Motor SUDL-65 Motor shaft key (3/16" x 3/16" x 1 1/4") Z-C-PU_2872...
  • Page 20 90-_ (oil fill plug) (oil drain plug) D21245 Rev. 0 6/29/00 20--...
  • Page 21 PART NUMBER DESCRIPTION SSP-9401 Connector Body Z-CAC-291-1 Head Gasket 265-25 (2Intakeflapper valve - square cornerSused on head) .I o° SSF-9821 Screw #5-40 x 1/4" (8 used) CAC-294 Restrictor plate (2 used) Z-265-196-1 Exhaust flapper valve - beveled corners (2 used on valve plate) DAC-4129-1 Valve plate assembly (includes...

  • Page 22: How To Order Repair Parts

    SEeA.RS OWNERS MANUAL CRAFTSMAN PERMANENTLY LUBRICATED TANK MOUNTED AIR COMPRESSOR MODEL The model number of your Sears Air Compressor can be found on the maintenance label on the top of the shroud or on the bar code label on the rear of the air tank.

Table of Contents