Page 1
FAX-1355 FAX-1360 FAX-1460 Before you can use the machine, you must set up the hardware. Please read this Quick Setup Guide for the correct setup procedure. Setting Up the Machine Setup is Complete! Keep this Quick Setup Guide and the User’s Guide in a convenient place for quick and easy reference at all times.
Symbols used in this guide Caution Improper Setup Warning Warnings tell you what to do to prevent Cautions specify procedures you must Improper Setup icons alert you to possible personal injury. follow or avoid to prevent possible devices and operations that are not damage to the machine or other objects.
Getting Started Carton components Carton components may vary from one country to another. Save all packing materials and the carton in case for any reason you must ship your machine. Handset Curled Cord Power Cord User’s Guide Quick Setup Guide (FAX-1360 and FAX-1460) Telephone Handset Telephone Line Cord...
Setting Up the Machine Removing the protective Loading paper parts You can load up to 100 sheets of 80 g/m Remove the protective tape. (20lb) paper. For details, see Using the ADF in Chapter 2 Installing the Handset of the User’s Guide. (For FAX-1360 and FAX-1460) Pull the paper tray completely out of the machine.
Page 7
Setting Up the Machine Press and slide the paper side guides (1) and Close the output paper tray cover (1) and slide paper length guide (2) to fit the paper size. it forward. Slowly push the paper tray completely into the machine.
Setting Up the Machine Set the receive mode to ‘External TAD’ for Connecting the phone line FAX-1355 and FAX-1360, or ‘Manual’ for FAX-1460 if you have an external answering machine. For details, see Connecting an Connect the telephone line cord. Connect one external TAD (telephone answering device) end of the telephone line cord to the socket on in Chapter 7 of the User’s Guide.
Page 9
Setting Up the Machine Open the ink cartridge cover (1). Take out the ink cartridge. Carefully remove the protective yellow cap (1). Pull the lock release lever down and remove the yellow protective part (1). Improper Setup DO NOT touch the area shown in the illustration below.
Page 10
Lift the lock release lever and gently push until • Brother multifunction machines are designed to it clicks, and then close the ink cartridge cover. work with ink of a particular specification and will work to a level of optimum performance when used with genuine Brother branded ink cartridges.
Setting Up the Machine The LCD shows: Print quality check Start Cleaning? After the cleaning cycle is finished, the LCD shows: 1.Yes 2.No Set Paper and Press 1 (Yes), the machine will then start cleaning. After cleaning is finished, press Start. The Press Start machine starts printing the Print Quality Check Sheet again and goes back to step 3.
Setting Up the Machine Setting the date and time Setting your station ID The machine displays the date and time, and if you You should store your name and fax number to be set up the station ID it will add it to each fax you send. printed on all fax pages that you send.
Setting Up the Machine Setting tone or pulse dialling Choosing a Receive Mode mode (For FAX-1355 and FAX-1360) Your machine comes set for a Tone dialling service. If There are four possible receive modes: Fax Only, you have a Pulse dialling service (rotary), you need to Fax/Tel, Manual and External TAD.
Setting Up the Machine Choosing Receive Mode Setting up the TAD (For FAX-1460) (For FAX-1460) There are three possible receive modes: Fax Only, You must record an outgoing message in order to use Fax/Tel and Manual. the TAD mode. Are you using the built-in Record the TAD Outgoing Message See Digital TAD in TAD?
Compilation and Publication Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice.