hit counter script
Download Print this page
Whirlpool 8565591-D-WH Dimensions And Installation Information
Whirlpool 8565591-D-WH Dimensions And Installation Information

Whirlpool 8565591-D-WH Dimensions And Installation Information

Advertisement

Quick Links

®
Washer
PRODUCT MODEL NUMBERS
LHW0050P
Electrical: A 120-volt, 60-Hz., AC-only, 15- or
20-amp fused electrical supply is required. A time-
delay fuse or circuit breaker is recommended. It is
recommended that a separate circuit serving only
this appliance be provided.
RECESSED OR CLOSET INSTALLATION
Washer only
14" (35.6 cm)
18"(45.7 cm)
4"
(10.16 cm)
0"
1" (2.5cm)
(0 cm)
A
A. Side view - closet or confined area
B. Recessed area
C. Closet door with vents
Additional spacing should be considered for ease of installation and servicing.
Additional clearances may be required for wall, door and floor moldings.
Additional spacing of 1" (2.5 cm) on all sides of the washer is recommended to reduce noise transfer.
DRAIN SYSTEM OPTIONS
23.5 - 35"
(59.7 - 88.9 cm)
A
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm).
The minimum carry-away capacity can be no less than 4.2 gal. (15.9 L)
per minute. A 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe
adapter kit is available. The top of the standpipe must be at least 23.5"
(59.7 cm) high.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
REQUIREMENTS
(7.6 cm)
2
48 in.
2
(310 cm
)
2
24 in.
2
(155 cm
)
(7.6 cm)
0"
(0 cm)
B
C
B
³⁄ ₄
38
"
(98.43 cm)
³⁄ ₈
23
"
(59.37 cm)
Stacked with stack kit (accessory)
3"
12"
(30.5 cm)
DRYER
WASHER
3"
0" (0 cm)
0" (0 cm)
A
A. Recessed area
B. Side view - closet or confined area
C. Closet door with vents
If a closet door is installed, the minimum air openings in the top and bottom of the
door are required. Louvered doors with air openings in the top and bottom are acceptable.
Companion appliance spacing should also be considered.
Laundry tub drain system (view C)
The laundry tub requires a minimum carry-
away capacity of 4.2 gal. (15.9 L) per minute.
The top of the laundry tub must be at least
23.5" (59.7 cm) above the floor and no
higher than 72" (183 cm) from the bottom of
the washer.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
¹⁄ ₈
*
23
"
(58.74 cm)
¹⁄ ₄
33
"
(84.45 cm)
3" (7.6 cm)
2
48 in.
2
(310 cm
)
2
24 in.
2
(155 cm
)
1" (2.5 cm)
B
C
Floor drain system (view D)
The floor drain system requires a siphon break
that may be purchased separately. The siphon
break must be a minimum of 28" (71 cm) from
the bottom of the washer. Additional hoses might
be needed.
The minimum carry-away capacity can be no less
than 4.2 gal. (15.9 L) per minute.
3"
(7.6 cm)
3"
(7.6 cm)
Ref. 8565591 Rev. B
11-30-05

Advertisement

loading

This manual is also suitable for:

Lhw0050p