Table of Contents
Advertisement
Switching the input
Click [INPUT SELECT] in the [Remote preview lite] page.
1
[INPUT SELECT]
Switches to the input to view the image.
2
[INPUT]
Displays the input terminal currently selected.
Note
f View the input image in the Pre-Show mode, and turn on the power in [Projector control] → [Basic control] page/[Detail control] page if there
is no problem to project.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1
[PROJECTOR TYPE]
Displays the type of the projector.
2
[MAIN VERSION]
Displays the firmware version of the projector.
3
[POWER]
Displays the status of the power.
4
[SHUTTER]
Displays the status of the shutter function ([CLOSE]: Enabled
(closed), [OPEN]: Disabled (open)).
5
[OPERATING MODE]
Displays the setting status of [OPERATING MODE].
6
[SERIAL NUMBER]
Displays the serial number of the projector.
7
[OSD]
Displays the status of the on-screen display.
8
[VOLUME]
Display the volume status.
9
[LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
Chapter 5 Operations — Using the web control function
1
1
2
3
4
PT-FRQ50
5
3
[SIGNAL NAME]
Displays the input signal name.
4
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
10 [INPUT]
Displays the status of the selected input.
11 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
12 [OPTICS MODULE TEMPERATURE]
Displays the status of the internal temperature of the projector.
13 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the projector.
14 [LIGHT TEMPERATURE1], [LIGHT TEMPERATURE2]
Displays the temperature status of the light source.
15 [LIGHT]
Displays the lighting status and runtime of the light source.
16 [SELF TEST]
Displays the self-diagnosis information.
17 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
ENGLISH - 159
Advertisement
Table of Contents
