Advertisement
Quick Links
Advertisement
Related Manuals for Honeywell SPLCC1BAXCXNZZ
Summary of Contents for Honeywell SPLCC1BAXCXNZZ
- Page 1 Gas Detec on Sensepoint XCL Fixed Gas Detector Quick Start Guide...
- Page 2 Quick Start Guide Read and understand the Sensepoint XCL Operating Instructions before installing, operating or servicing this product. These are available for download from the Honeywell Analytics website. Visit www.honeywellanalytics.com. Safety Installation must be in accordance with the recognized standards of the appropriate authority in the country and locality concerned.
-
Page 3: Cable Connections
Cable Connections 1. Fit suitable cable glands (included) or conduit fittings to the opened cable entries. 2. Feed the cable through the cable gland. 3. Turn over the detector module and locate the terminal blocks on the back. Remove the terminal blocks, pulling them toward the center of the module. - Page 4 2. Position the detector module onto the back box ensuring that the Status Indicator is in the top left-hand corner when viewed from the front. 3. Tighten the four retaining screws using a No. 2 Phillips screwdriver to secure. 4. Where used, tighten the sealing nut of the cable gland to secure the cable. Refer to the cable gland manufacturer’s instructions.
-
Page 5: Specifications
11 to 32 VDC, Modbus versions: 9 to 32 VDC † 20 to 27 VAC ‡ Dependent on version § Flammable catalytic versions: 10 to 90% RH. Operating the detector outside of this range may result drift and a ¶ decrease detector accuracy. 3017M5000_1 HAA170019 © 2017 Honeywell Analytics... - Page 6 For full operating South Korea instructions： Tel: +82 (0)2 6909 0300 Fax: +82 (0)2 2025 0388 India Tel: +91 124 4752700 China Tel: +86 10 5885 8788 3000 analytics.ap@honeywell.com www.honeywell.com Copyright © 2016 Honeywell Analytics Co., Ltd. All rights reserved.