Table of Contents
Advertisement
Operators Manual
ICRAFTSMAN°I
60_r_lP°wer
2.0 GPM
HIGH PRESSUREWASHER
CLEANING SYSTEM
Model No. 580.768020
HOURS:
Mon. - Fri. 8 a.m. to 5 p.m. (CT)
CAUTION:
Before using this product,
read this
manual and follow all its Safety Rules
and Operating
Instructions.
Sears, Roebuck
and Co., Hoffman Estates,
IL 60179
Visit our Craftsman website: www.sears.com/¢mftsman
•
Safety
•
Assembly
•
Operation
•
Maintenance
•
Parts
Part No. B3639 Draft I (4/6/1999) Printed in the U.S.A.
Advertisement
Table of Contents
Related Manuals for Craftsman 580.768020
Summary of Contents for Craftsman 580.768020
- Page 1 Before using this product, manual and follow all its Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman Estates, Visit our Craftsman website: www.sears.com/¢mftsman Part No. B3639 Draft I (4/6/1999) Printed in the U.S.A. read this IL 60179 • Safety •...
- Page 2 Storage LIMITED ONE YEAR WARRAN_t' For one year from the date of purchase, whenthis Craftsman Cleaning System is maintained and operated according to the instructionsin the owner's manual, Sears will repair, free of charge, any defect in matedal and " workmanship.
- Page 3 • Operate engine only at governed speed. Running the engine at excessive speeds increases the hazard of personal injury. Do not tamper with parts which may increase or decrease the governed speed. Do not wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.
- Page 4 Check carton for additional loose parts. HOW TO SET UP YOUR PRESSURE WASHER For the most part, your Craftsman High Pressure Cleaning System has been assembled at the factory. You must, however, assemble the spray gun and attach the high pressure hose to the spray gun.
- Page 5 KNOW YOUR HIGH PRESSURE Read this owner's manual and safety rules before operating your cleaning system. Compare the illustrations with your cleaning system to familiarize yourself with the locations of various controls and adjustments. Dial-A-Cleaner Selector Knob Gas Cap. Throttle Control Choke Lever Water Inlet Adjustable Nozzle - Adjust for high or low pressure;...
- Page 6 If you have any problems operating your cleaning system, please call the pressure washer helpline at 1-800-222-3136. How To Use Ute Adjustable Nozzle ARNING! Never adjust spray pattern when spraying.
- Page 7 32°F. Check your engine oil level more frequently to avoid possible damage from running low on oil. • Place pressure washer system on a level surface • Clean area around oil fill and remove oil dipstick. • Wipe dipstick clean.
- Page 8 Let rope return to starter slowly. Note: Always keep the Throttle Control Lever in the 'Fast' position when operating the pressure washer. • When the engine starts, gradually move the Choke Lever from one position to the next until it is in the "Run"...
- Page 9 RESPONSIBILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE MAINTENANCE TASK PRESSURE WASHER Check/cleanwater inletscreen on quick.connect. Check high pressure hose. Check detergent hose. Check spray gun and assembly for leaks. Purge pump of air and contaminants. ENGINE Check oil level.
- Page 10 BEFORE EACH Check water inlet screen for damage. • Check high pressure hose for leaks. • Check chemical tanks and filters for damage. • Check gun and wand assembly for leaks. • Purge pump of air and contaminants. • Check engine oil level. PRESSURE WASHER MAINTENANCE...
- Page 11 • Use the wire included in the kit or a small paper clip to free the foreign rcatedals clogging or restricting the nozzle. Insert wire into nozzle and turn back and forth to clear obstruction. Remove additional debris by back flushing water supply through wand.
- Page 12 -Change oil while engine is still warm from running, as follows: • Drain fuel tank by running pressure washer until fuel tank is empty. • Clean area around oil fill, remove oil fill cap/dipstick.
- Page 13 Pour RV-Antifreeze (antifreeze without alcohol) into the hose. Pull the recoil handle twice. LONG TERM STORAGE If you do not plan to use the Pressure Washer for more than 30 days, you must prepare the engine for long term storage.
- Page 14 PROBLEM Pump has following problems: failure to produce prossure, or erratic pressure, chattering, loss of pressure, low water volume. Detergent fails to mix:. " Engine runs good when not spraying but dies when you begin to spray. Enginewill not start;or starts and runs rough Engineshutsdown during operation...
- Page 16 Craftsman 2000 PSI Cleaning System 580.768020 Briggs & Stratton 6HP Quantum #12H802-2383-E1 I 1036 LABEL KIT-EMISSION 121 CARBURETOR KIT 137 _=_ 1100 969 w...
- Page 17 Craftsman 2000 PSI Cleaning Briggs & Stratton 6HP Quantum [ 1019 LABEL KIT 687 '_ "_rREQUIRES SPECIALTOOLS TO INSTALL SEE REPAIR INSTRUCTION MANUAL. 443o. System 580.768020 #12H802-2383-E1 20 _ 970 % 1087 1095 VALVEOVERHAUL GASKETSET 615 O 404_ 616 _...
- Page 18 Rod-Connecting 94699 Screw (Connecting Rod) 262651 Valve-Exhaust 262652 Valve-Intake 262224 Spring-Valve 224511 Guard-Flywheel 93312 Retainer-Valve 493737 Govemor/Oil Slinger System 580.768020 Item Kit Note- . 117 Note- Part# 262204 Tappet-Valve 498275 Gear-Cam 272199 Gasket-Intake 94526 Screw (Intake Manifold) 497440 Housing-Rewind Starter...
- Page 19 Seal-Intake Manifold _¥ 270344 262749 Spring 396847 Switch-Stop ., Manifold-lntal_e 497465 66538 Boot-Spark Plug 493823 Spacer (Includes 2) 280512 Spacer-Fuel Tank System 580.768020 #12H802-2383-E1 Itern Kit Pa_# . 94515 689A 263073 262715 262598 499034 49874 272616 495263 493880 213512 213513...
- Page 20 Craftsman 2000 PSI Cleaning System 580.768020 Pump...
- Page 21 FITI'ING, Chem Inject BALL, Chem Inject SPRING, Chem Inject O-RING, Ventud VENTURI, Chem Inject B3828 KIT, UNLOADER CAP, Unloader o°°,.. O-RING, Unloader Cap SPRING, 2000 Unloader System 580.768020 Item Pa_# B3813 B3286 97837 97841 97840 40946 B4186 B2312 B1933 Des_ PISTON, Unloader O-RING, .364 ID x .070...
- Page 22 Craftsman 2000 PSI Cleaning System 580.768020 Main Unit...
- Page 23 COVER, Hinge B2347 END CAP, Tube 31669 BOLT, 1/4"-20 x 1-3/4" Carriage 49808 WASHER, M12 Flat B2142 ASSY., Wheel & Tire 2" x 9" 75402 PUSHNUT, 1/2" System 580.768020 Item Part # 52858 27007 50190 51731 B3708 B2730 B3589 B3263...
- Page 24 BRIGGS & STRATTON CORPORATION (B&S) , THE CALIFORNIA RESOURCES BOARD (CARB) AND THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY EMISSION CONTROL SYSTEM WARRANTY STATEMENT DEFECT WARRANTY RIGHTS AND OBLIGATIONS) In the interest of the environment, Briggs & Stratton engines that meet strict emission requirements pre .labeled, "This engine conforms to 1995-1998 California Emission Control Regulations for ULGE engines and U.S.
- Page 25 BRIGGS AND STRATrON CONTROL DEFECTS WARRANTY PROVISIONS The following are specific provisions relative to your Emissions Control Defects Warranty Coverage. It is in addition to the B&S engine warranty for non-regulated engines found in the Operator/Owner's Manual, 1. Warranted Parts Coverage under this warranty extends only to the parts listed below (the emission control systems parts) to the extent these parts were present on the...
- Page 26 For in.home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME" Para pedir servicio de reparaci6n a domicilio - 1-800-676-5811 In Canada for all your service and parts needs call - 1-800-665-4455 Au Canada pour tout 'le service ou les pieces For the repair or replacement parts you need: _Call 7 am - 7 pm, 7 days a week 1-800-366-PART...