Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch SGS2ITW08G/01
Summary of Contents for Bosch SGS2ITW08G/01
- Page 1 Dishwasher SGS2ITW08G [en] Information for Use...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Baking sheet spray head .... 21 General information...... 4 Basket heights........ 21 Intended use........ 4 Before using for the first time .. 22 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 4 tion.......... 22 Safe use ........... 6 Damaged appliance ...... 7 Water softening system.... - Page 3 Terminate programme.... 32 Switching off appliance .... 32 Basic settings........ 33 Overview of basic settings ..... 33 Cleaning and servicing .... 34 Cleaning the tub ...... 34 Cleaning products ...... 34 Tips on appliance care.... 34 Machine Care ...... 34 Filter system ........ 35 Cleaning spray arms ...... 37 Troubleshooting......
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety WARNING ‒ Risk of burns! If the appliance is not installed properly, this may result in burns. ▶ With free-standing appliances, ensure that they are installed with the back panel against a wall. Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of scalding! If you open the appliance door while the programme is run- ning, hot water may splash out of the appliance. ▶ Open the appliance door carefully if the programme is still running. WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶... -
Page 8: Risk To Children
en Safety ¡ Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. - Page 9 Safety en WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. ▶ Keep children away from detergent and rinse aid products. ▶ Keep children away from the appliance when open. The wa- ter in the interior of the dishwasher is not drinking water.
-
Page 10: Preventing Material Damage
en Preventing material damage pipes supplied for the drinking Preventing material damage Preventing material dam- water and waste water connec- tions are not affected here. ¡ Modified or damaged water hoses may result in material damage and Preventing material damage Safe installation damage to the appliance. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en ¡ Unsuitable cleaning agents may If you do not have much tableware to damage the appliance. wash, use the additional Half Load Do not use a steam cleaner. function. ▶ So as not to scratch the finish ▶... -
Page 12: Installing And Connecting The Appliance
en Installation and connection Note: The appliance has been tested Connect the appliance to the at the factory to check it is in working power supply. order. It is possible that water has left marks on the appliance. These Drainage connection marks will disappear after the first Connect your appliance to drainage wash cycle. -
Page 13: Electrical Connection
Installation and connection en Electrical connection Connecting the appliance to the electricity supply Notes ¡ Please follow the "Safety instruc- tions" → Page 4. ¡ Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 51. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add special salt to the dispenser for special salt. → "Water softening system", Page 22 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance "Switching on the appliance" → Page 30 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme button "Programmes" → Page 17 Programmes Special salt refill indicator Water softening system → "Adding special salt", Page 23 Rinse aid refill indicator Rinse aid system → "Adding rinse aid", Page 25...
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Additional functions Programme: Programme sequence Additional func- tions Tableware: Time-optimised: Extra Dry → "Additional ¡ Cleaning mixed table- ¡ Cleaning 65 °C Express 65° - 1h ware and cutlery. functions", ¡ Intermediate rinse Level of soiling: Page 18 ¡ Final rinse 69 °C ¡ Removing common ¡... -
Page 19: Features
Features en Re-attach the basket to the upper Features Features rollers (setting 3) or lower rollers (setting 1). You can find an overview of the pos- Features sible features of your appliance and how to use them here. These features depend on the model of your appliance. -
Page 20: Bottom Basket
en Features Bottom basket Cutlery basket Arrange pans and plates in the bot- Arrange cutlery in the cutlery basket, tom basket. always without sorting it and with the sharp points downwards. Cutlery basket Large plates up to a diameter of Folding prongs 31 cm can be arranged in the bottom basket as shown. -
Page 21: Baking Sheet Spray Head
Features en Push the lever forwards and fold Note: Check that the appliance is al- down the prongs . ways operated with the top basket or the baking sheet spray head. Inserting baking sheet spray head Use the baking sheet spray head in- stead of the top basket to clean large trays, grilles and plates. -
Page 22: Before Using For The First Time
en Before using for the first time Level Top basket Bottom basket 2 max. ø 24.5 cm 27.5 cm 3 max. ø 27 cm 25 cm Start the Programme with the Before using for the first time Before using for the highest cleaning temperature without tableware. -
Page 23: Setting The Water Softening System
Water softening system en Note: Set the water hardness determ- hardness. The higher the water hard- ined on your appliance. ness, the greater the consumption of special salt. → "Setting the water softening sys- tem", Page 23 ATTENTION! With a water hardness of 0 - 8 °E ¡... -
Page 24: Switching Off The Water Softening System
en Water softening system Switching off the water Regeneration of the water softening system softening system If you find the special salt refill indic- In order to obtain fault-free function of ator irritating, e.g. when using com- the water softening system, the appli- bined detergents with salt replace- ance performs regeneration of the ment substances, you can switch the... -
Page 25: Rinse Aid System
Rinse aid system en Close the lid of the dispenser for Rinse aid system Rinse aid system rinse aid. a The lid clicks into position. Rinse aid system Rinse aid Setting the amount of rinse For optimum drying results, use rinse aid. -
Page 26: Detergent
en Detergent To open the appliance settings, Detergent Description press for 3 seconds. entirely and leave residues is flashing on the display. of detergent. This may im- Press repeatedly until pair the cleaning effect. flashes. Powder deter- Powder detergent is re- Press repeatedly until no gent... -
Page 27: Unsuitable Detergents
Detergent en For better washing and drying results Information on detergents and to avoid damage to the appli- Follow the instructions on detergents ance, please additionally use "Spe- in everyday use. cial salt" → Page 23 and "Rinse aid" ¡ Detergents marked as "organic" or → Page 25. -
Page 28: Tableware
en Tableware Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml a The lid clicks into position. If you are using tablets, one is a The detergent dispenser will open enough. -
Page 29: Damage To Glass And Tableware
Tableware en Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Only put glasses and china in the is too high. ures. dishwasher if it is marked as dish- After the programme washer-safe by the manufacturer. -
Page 30: Removing Tableware
en Basic operation To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 31: Setting A Programme
Basic operation en Setting a programme Starting the programme To adjust the wash cycle to the soil- Press ▶ ing level of the tableware, select a a The programme has ended when suitable programme. no indicators on the controls light Press the programme button re- ▶... -
Page 32: Terminate Programme
en Basic operation Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Press for approx. ▶ 4 seconds. a All displays light up. a As soon as the displays are off, the residual water is pumped out. -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Water hardness Scale with 4 levels Set the water hardness. -
Page 34: Cleaning And Servicing
To keep your appliance working effi- Cleaning and servicing chine Cleaner for Dishwashers online ciently for a long time, it is important at https://www.bosch-home.com/ to clean and maintain it carefully. store or from customer service. Cleaning the tub Tips on appliance care... -
Page 35: Filter System
Cleaning and servicing en Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform-... - Page 36 en Cleaning and servicing Press the locking catches Fine filter gether and lift the coarse filter out Coarse filter . Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system ...
-
Page 37: Cleaning Spray Arms
Cleaning and servicing en Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 38: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... -
Page 39: Washing Results
Troubleshooting en Fault Cause Troubleshooting Display for water supply Check the water connection for lights up leaks. Restore the power supply. Switch the appliance on. Wastewater hose is blocked Reposition the wastewater hose or kinked. without kinks. Remove residues. Siphon connection is still Check the connection to the siphon ▶... - Page 40 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Programme or programme "Select a programme with drying, ▶ option has no drying phase, e.g. intensive, strong or ECO pro- gramme." → Page 17 or the drying phase is too brief. Some option buttons decrease the drying result, e.g varioSpeed.
- Page 41 Troubleshooting en Fault Cause Troubleshooting Appliance interior still wet Not a fault. The condensa- No action required. after wash cycle. tion drying principle causes water droplets in the tub – they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out.
- Page 42 en Troubleshooting Fault Cause Troubleshooting Detergent residue in the ap- Lid of the detergent dis- Arrange tableware in the top basket pliance penser is blocked by items tableware so the tab collecting tray of tableware parts and will is not obstructed by tableware. → "Arrange tableware", Page 29 not open.
- Page 43 Troubleshooting en Fault Cause Troubleshooting Stubborn white coatings are Detergent substances are Change your "detergent" ▶ → Page 26. present on tableware, inside deposited there. These coat- the appliance or the door. ings cannot generally be re- Clean the appliance mechanically. ▶ moved with chemicals. The hardness range is set in- Set the Water softening system to ▶...
- Page 44 en Troubleshooting Fault Cause Troubleshooting Coloured coatings (blue, yel- may not always be possible to com- low, brown) that are difficult pletely remove deposits but they or impossible to remove are are harmless to health. present inside the appliance or on stainless steel table- ware.
- Page 45 Troubleshooting en Fault Cause Troubleshooting Removable streaks are Tableware has been pre- Only remove large remnants of food ▶ present on glasses, glass- cleaned too intensely. The and do not prerinse tableware. ware with a metallic appear- sensors chose a weaker pro- ance and cutlery.
-
Page 46: Information On Display Panel
en Troubleshooting Fault Cause Troubleshooting Excessive formation of foam Detergent or appliance care Change the brand of detergent. ▶ occurs. product used causes excess- ive foaming. Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 23. Special salt refill indicator Insufficient special salt. - Page 47 Troubleshooting en Fault Cause Troubleshooting Appliance does not start. Appliance door is not closed Close the appliance door. ▶ properly. → "Terminate programme", Programme starts automat- You did not wait until pro- ▶ ically. gramme ended. Page 32 Appliance stops during the Appliance door is not closed Close the appliance door.
-
Page 48: Mechanical Damage
en Troubleshooting Mechanical damage Fault Cause Troubleshooting Appliance door cannot be Door lock has been activ- Close the appliance door with ▶ closed. ated. greater force. Door cannot be closed due Check whether the appliance has ▶ to installation method. been installed properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabin-... -
Page 49: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 50: Protect Appliance From Frost
en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 51: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en least 10 years from the date on Voltage 220 - 240 V, 50 Hz or which your appliance was placed on 60 Hz the market within the European Eco- Power rating 2000 - 2400 W nomic Area. Fuse 10 - 16A Note: Under the terms of the manu- Water pressure ¡... - Page 52 en Technical specifications website for your appliance model and additional documents). Alternat- ively, you can request the relevant in- formation from oss- request@bshg.com or BSH Hausger- äte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany. The source code will be made avail- able to you on request. Please send your request to oss- request@bshg.com or BSH Hausger- äte GmbH, Carl-Wery-Str.34, 81739...
- Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.