Table of Contents
Advertisement
UPS5000-S-1200 kVA
User Manual
Managing the UPS by Using the NMS
●
●
4.2.5 Protecting the Server by Using the RCCMD Software
4.2.5.1 Introduction to the Software
The RCCMD shutdown software is part of the centralized monitoring system of the
Generex network. The UPS5000 MDU integrates the functions of the Generex
RCCMD server:
●
●
●
For the method of installing the RCCMD client, see the manual related to the
RCCMD.
Issue 10 (2023-05-26)
Applying for Access Rights
To manage the UPS by using the UNMS II of Generex over the MDU, apply to
the system administrator of the MDU for access rights and add the NMS
information to the NMS access list of the MDU. The NMS address and access
right settings are used for adding information about the NMS accessing the
MDU, including the NMS address, access right, and Trap port. For details
about how to add an NMS over a web browser, see
Figure 4-72 Setting the SNMP Trap
Managing the UPS
Take the UNMS II of Generex for example. The method for managing the UPS
by using the UNMS II is the same as the method for managing other devices
by using the UNMS II. For details, see the UNMS II user manual.
Sends the shutdown command, notification message, and Trap message to
the RCCMD client if the UPS system generates an alarm; executes commands
on the RCCMD client.
Receives the message "UPS alive check" sent by the RCCMD client and replies
with the system status.
Configures and saves the address and port for receiving the shutdown
command, and the message sending mechanism.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 User Interface
Figure
4-72.
178
Advertisement
Table of Contents
