Page 1
Monitor 5000 Series 27E1N5600E User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.com/welcome...
Keep the display away from oil. Oil may damage the plastic cover of the display and void the warranty. This electronic user’s guide is intended for anyone who uses the Philips monitor. • Remove any object that could fall Take time to read this user manual into ventilation holes or prevent before you use your monitor.
Page 4
monitor damage will not be covered • Oil-based cleaning solutions may under warranty. damage the plastic parts and void the warranty. • Do not knock or drop the monitor during operation or transportation. • Unplug the monitor if you are not going to use it for an extensive •...
1.2 Notational Descriptions Uninterrupted display of still or static images over an extended The following subsections describe period may cause “burn-in”, also notational conventions used in this known as “after-imaging” or “ghost document. imaging”, on your screen. • “Burn-in”, “after-imaging”, or Notes, Cautions and Warnings “ghost imaging”...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or on entails participation in national take-...
Pay attention not to scratch or damage the screen. 2.1 Installation Package contents Monitor 5000 Series 27E1N5600AE 27E1N5600E Quick start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. (1) Gently attach the base to the stand.
2.2 Operating the monitor Connecting to your PC Description of the control buttons AC power input Press to switch power on. HDMI input Press more than 3 seconds to DisplayPort input switch power off. USB-C Access the OSD menu. Audio Out Confirm the OSD adjustment.
Page 9
0~20 On-Screen Display (OSD) is a feature in SmartResponse O , Fast , Faster, Fastest all Philips LCD monitors. It allows an end On, O SmartFrame Size (1, 2, 3, 4, 5, 6, 7) user to adjust screen performance or...
Page 10
Physical Function Note • MPRT: To reduce motion blur, LED Tilt backlight will strobe synchronously with screen refresh, which may 20° cause noticeable brightness change. • 75Hz refresh rate or higher is re- -5° quired for MPRT. • Adaptive Sync and MPRT cannot be enabled simultaneously.
Page 11
Pivot 0° 0° -90° 90° Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 0° 90° 1. Place the monitor face down on a -5° smooth surface. Pay attention not to * Display design may differ from those scratch or damage the screen.
Whether you're working SmartImage on screen display. with text applications, displaying images 2. Toggle to the up or down to select or watching a video, Philips SmartImage between the smartImage modes. delivers great optimized monitor 3. The SmartImage on screen display performance.
LED displays can cause eye Why do I need it? damage and affect vision over time. You want the very best visual clarity Developed for wellbeing, Philips and viewing comfort for every type of LowBlue Mode setting uses a smart content. SmartContrast dynamically...
4. Adaptive Sync AMD Radeon R7 260X • AMD Radeon R7 260 • ■ Processor A-Series Desktop and Mobility APUs Adaptive Sync AMD A10-7890K • AMD A10-7870K • PC gaming has long been an imperfect AMD A10-7850K • experience because GPUs and monitors update at different rates.
5. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.2331 (H) mm x 0.2331 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 2560 x 1440 @ 60 Hz Viewing Angle 178°...
Page 17
Stand Tilt -5 / +20 degree Height adjustment 130 mm Pivot -90 / +90 degree Power AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , at 115VAC , at 230VAC, 50Hz 60Hz 60Hz Normal Operation 30.2 W (typ.) 30.2 W (typ.) 29.2 W (typ.) Sleep (Standby mode)
Page 18
Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
For best output performance, please always ensure that your graphic card Recommended Resolution is capable of achieving the maximum 2560 x 1440 @ 60 Hz resolution and refresh rate of this Philips display. H. freq Resolution V. freq (Hz) (kHz) 31.47...
6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Other combinations of Pixel Defect Policy lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 22
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or sub panel in a Philips flat panel monitor pixels that are always dark or 'off'. That must have pixel or sub pixel defects is, a dark dot is a sub-pixel that stands...
Page 23
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer 2 adjacent dark subpixels 2 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer service still persists after you have tried these representative immediately. solutions, contact Philips customer service representative.
• Shut down your computer, Green, red, blue, dark, and white dots disconnect your old monitor and appears on the screen reconnect your Philips LCD monitor. • The remaining dots are normal • Turn on your monitor and then turn characteristic of the liquid crystal on your PC.
Page 27
Can I connect my LCD monitor to please use isopropyl alcohol. Do any PC, workstation or Mac? not use other solvents such as Ans.: Yes. All Philips LCD monitors are ethyl alcohol, ethanol, acetone, fully compatible with standard hexane, etc.
Page 28
"ghost imaging" will disappear gradually over a period of Ans.: Important Information manual time after the power has been can be download on the Philips switched off. website support page. Always activate a moving screen saver program when you leave your monitor unattended.
Page 29
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.