Related Manuals for Beko WTV7825XCW1
Summary of Contents for Beko WTV7825XCW1
- Page 1 Washing machine User Manual WTV7825XCW1 Document number :2820529653_EN/ 04-07-21.(0:13)
-
Page 2: General Safety Instructions
1 General • The water supply and drain safety instructions hoses must be securely attached and undamaged. This chapter contains safety instructions that can help to Otherwise, water may leak avoid the risk of injury and out. property damage. All types of •... - Page 3 1.2 Safety on hot surfaces PAY ATTENTION! • Packaging materials are hazardous to PAY ATTENTION! children. save all • The loading door window packaging materials in a becomes hot during washing safe place out of the reach at higher temperatures. of children.
-
Page 4: Electrical Safety
1.4 Electrical safety DANGER • Do not clean the product by DANGER spraying or pouring water • If the product malfunctions, on it! There is a risk of do not operate it without electric shock! having it repaired by an •... -
Page 5: Important Safety And Environmental Instructions
3 Intended use 2.Important Safety and Environmental Instructions • This product is designed for household use. It is not intended for commercial purposes and should not be used 2.1 WEEE Standard Compliance for any purpose not intended. This product complies with the •... -
Page 6: Technical Specifications
4 Technical specifications Beko Supplier name or trade name WTV7825XCW1 Model Name 7145745700 Rated power (kg) 1600 Maximum spin speed (rpm) Built-in Height (cm) Width (cm) Depth (cm) Single Water Inlet / Double Water Inlet † • Available Electric current (V/Hz) -
Page 7: Installation
4.1.3 Removing the Transport 4.1 Installation Locks • Consult the nearest authorized service for the installation of your product. 1. Loosen all bolts with a suitable wrench until they turn freely • Site preparation and electrical, water supply and 2. Remove the transport safety bolts by - drainage installations at the installation site turning them slightly. - Page 8 • In case the drain hose is raised after being at ground level or close to the ground (less than 40 cm above the ground), water drainage may become more difficult and the laundry may come out soaking wet. Therefore, follow the heights listed in the picture.
-
Page 9: Electrical Connection
4.2 Preparation 4.1.7 Electrical connection Connect the product to a grounded outlet 4.2.1 Sorting the laundry protected by a 16 amp fuse. Our company is † Sort the laundry according to the type of not responsible for damage resulting from fabric, colour, degree of soiling and permitted using the product without grounding in water temperature. -
Page 10: Loading The Laundry
4.2.3 Tips to save energy 4.2.6 Detergent and and water use fabric softener The following information will help you to use the product in an ecological and INFORMATION energy-saving manner. • If you use detergent, fabric softener, starch, • Operate the product at the highest power dye, bleach or descaler, read the allowed by the program you selected, but manufacturer's instructions on the... - Page 11 • It is recommended to use a liquid detergent for washing dark clothes and blankets. • Wash wool at the recommended program with a special wool detergent. • See the program descriptions section for recommended programs for different fabrics. If the product is equipped with a liquid •...
-
Page 12: Tips For Efficient Washing
The use of starch • Do not use bleach mixed with detergent. • Add liquid starch, powdered starch or colorant to • Use a small amount (about 50 ml) of bleach the fabric softener compartment. and rinse the clothes well, as this will •... - Page 13 4.2.8 Displayed program time You can see the duration of the program on the machine's screen when you select a program. The duration of the program is automatically adjusted while the program is running, depending on the amount of laundry you have loaded in your machine, the foam, an unbalanced load, fluctuations in the power supply, the water pressure and the program...
-
Page 14: Operating The Product
4.3 Operating the product 1 - Program selector knob (top position On / Off) 4.3.1 Control panel 2 - Screen 3 - End time setting button 4 - Program progress indicator 5 - Start/pause button 6 - Auxiliary function button 3 7 - Auxiliary function button 2 8 - Auxiliary function button 1 9 - Spin speed control knob 10 -... - Page 15 • : Selectable * : Automatically selected, cannot be canceled. * * * : Eco 40-60 with temperature selection 40 °C the test program conforms EN 60456:2016/A11:2020 and energy label according to the Commission Delegated Regulation (EU) 2019/2014 - : See program description for maximum load. INFORMATION •...
-
Page 16: Main Programs
4.3.5 Main programs of the stated washing temperature. Loading the machine with less laundry (eg half Depending on the type of material, use the capacity or less) may automatically shorten following main programs. program phases. In this case, energy and •... - Page 17 you are going to wash the clothing labels † Dark textile (recommended for shirts, pants, shorts, T- Use this program to protect the color of your shirts, baby clothes, pyjamas, aprons, dark clothes or jeans. This program offers good tablecloths, bed linen, duvet covers, sheets, washing efficiency even at low temperatures, bath/beach towels, towels, socks and cotton thanks to a special drum movement.
-
Page 18: Special Programs
4.3.7 Special programs spin speed. The spin speed will gradually decrease. Then, depending on the product For specific applications, select one of the model, "Rinse Hold" and "No Spin" options following programs. appear on the screen. If “No Spin” is selected, •... - Page 19 4.3.10.1 Utilities INFORMATION † prewash • This is not a washing program. It's a A prewash is only useful for very dirty laundry. If maintenance program. you do not use a prewash, you will save energy, • Do not run this program if there are objects water, detergent and time.
-
Page 20: Starting The Program
To deactivate the child lock: 2. Select the washing programme, temperature, spin speed and, if desired, Press and hold auxiliary function button 2 the auxiliary functions. for 3 seconds while the program is running. While pressing the button for 3 seconds, 3. -
Page 21: Program Progress
The machine checks the water level inside. If the INFORMATION level is suitable, the loading door light will turn off and the loading door can be opened in 1-2 minutes. • If no program is started or if no button is pressed within 10 minutes during the If the level is not suitable, the loading door program selection process, the lights on... -
Page 22: Canceling The Program
4.3.16 Canceling the program † Remove the emergency handle from the To cancel the programme, turn the program loading door behind the filter cover with a tool. selector knob to another programme. The † Open the loading door by pulling down previous program is cancelled. - Page 23 4.4 Maintenance and cleaning INFORMATION The life of your product will be extended and regular problems will be reduced if it is • Foreign metals cause rust spots in the cleaned regularly. drum. Clean the stains on the drum surface with stainless steel cleaners. 4.4.1 Cleaning the detergent drawer Clean the detergent dispenser regularly...
- Page 24 expensive for water drain hose g to pump: go away • V • A Pull the emergency drain hose out of its seat. Place a large container near the end of the hose. Drain the water into the container by like this removing the plug at the end of the hose.
-
Page 25: Troubleshooting
5 Troubleshooting The loading door cannot be opened. • The loading door lock has been activated due to the water level in the product. >>>Drain the water with Program does not start after loading door is closed. the Pump or Spin program. •... - Page 26 Color of the clothes has faded. † Product does not switch to the spin phase. † • The charge in the product is unevenly distributed. • Too much laundry has been loaded. >>>Do not load too much >>>The automatic unbalanced load detection system laundry.
- Page 27 • Detergent was mixed with the fabric softener. > > > Do not mix the softener with the detergent. Wash and clean the drawer with hot water. • The drum has not been cleaned regularly. >>>Clean the drum regularly. For this procedure, see "Cleaning the loading door and drum".
- Page 28 Repairs and attempted repair by end users of parts not included in this list and/or where the instructions in the self-repair manual or available on support.beko.com are not followed, may result in security issues that cannot be assigned to Beko and they will void the warranty of the product.