hit counter script
Download
Share
Print this page
Dell P2222H Instructions
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Monitor
  5. P2222H
  6. Instructions

Dell P2222H Instructions

Hide thumbs Also See for P2222H:
1
2
3
4
5

Advertisement

Quick Links

Download this manual
1
DELL P2222H
1. Disassembly Procedures:
S1
Open the Pizza carton with a proper tool.
Take out pack stand, base and all of the
including
QSG,
S2
CD&user's manualand EEI label(optinal) from the
carton.(Note: It depends on whether users returning
the accessories)
base
power cable
Take out of the Paper cushion from the carton, then
S3
take out the packed monitor from the Pizza box and
put it on a cushion.
Take out the monitor from the bag and put it on a
S4
protective cushion.
accessories
DP cable, power cable, USB cable,
stand
QSG
DP cable
USB cable
user's manual
monitor
Use a Philips-head screwdriver to remove four
S5
screws for unlocking mechanisms.
(No.1~4 screw size=M4x10; Torque=12
2
4
Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
S6
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
2
Lift the rear cover up carefully. Disconnect the key
S6
cable and USB FFC cable from the connectors of
the interface board, and then remove the rear cover.
±
0.5kgfxcm)
3
1
.
1
2
3

Advertisement

loading

Related Manuals for Dell P2222H

Summary of Contents for Dell P2222H

  • Page 1 DELL P2222H 1. Disassembly Procedures: Use a Philips-head screwdriver to remove four screws for unlocking mechanisms. Open the Pizza carton with a proper tool. (No.1~4 screw size=M4x10; Torque=12 ± 0.5kgfxcm) Take out pack stand, base and all of the accessories...
  • Page 2 DELL P2222H Use a Philips-head screwdriver to remove 2pcs Disconnect the LED cable from the connector, then screws for unlocking the joystick key board unit, then release the LED cable by tearing off 2pcs tapes. tear off the tapes and release the USB board.
  • Page 3 DELL P2222H Use a Hex-head screwdriver to remove two screws for unlocking the D-Sub connector. (No.1~2 screws size=M3x8, Torque=6±0.5kgfxcm) Put the panel module on a protective cushion, then disconnect the panel lamp cable from the connector of panel module, then unplug the LVDS cable from the connector of the panel module.
  • Page 4 DELL P2222H S20-4 Take out bulk cap. pin solder with soldering iron and Remove electrolyte capacitors (red mark) from absorber. printed circuit boards. S20-1 Cut the glue between bulk cap. and PCB with a knife. S20-5 Lift the bulk cap. up and away from the PCB.
  • Page 5 DELL P2222H 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...