hit counter script
Cisco 2600XM Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. 2600XM Series
  6. Quick start manual
Cisco 2600XM Series Quick Start Manual

Cisco 2600XM Series Quick Start Manual

Cisco router quick start guide
Hide thumbs Also See for 2600XM Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco 2600XM Series and Cisco 2612 Routers
INCLUDING LICENSE AND WARRANTY
Cisco 90-Day Limited Hardware Warranty Terms
1
2
Documents, Equipment, and Tools
3
Install Chassis
Connect Cables
4
Power Up the Router
5
6
Perform Initial Configuration
7
Interface Numbering
Where to Go Next
8
Obtaining Documentation
9
10
Documentation Feedback
11
Obtaining Technical Assistance
Obtaining Additional Publications and Information
12
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for Cisco 2600XM Series

Summary of Contents for Cisco 2600XM Series

  • Page 1 Cisco 2600XM Series and Cisco 2612 Routers INCLUDING LICENSE AND WARRANTY Cisco 90-Day Limited Hardware Warranty Terms Documents, Equipment, and Tools Install Chassis Connect Cables Power Up the Router Perform Initial Configuration Interface Numbering Where to Go Next Obtaining Documentation...

  • Page 2: Cisco 90-Day Limited Hardware Warranty Terms

    Cisco 90-Day Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com.

  • Page 3: Documents, Equipment, And Tools

    • Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Regulatory Compliance and Safety Information document • Cisco Router and Security Device Manager (SDM) Quick Start Guide document (if shipped with VPN bundle) • Cisco 2600XM Series and Cisco 2612 Routers Quick Start Guide (this document) Items Not Included Individual items in this list may be required for your particular application: •...

  • Page 4: Warning Definition

    Warning Definition IMPORTANT SAFETY INSTRUCTIONS Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.
  • Page 5 Avvertenza IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Per le traduzioni delle avvertenze riportate in questo documento, vedere le avvertenze di sicurezza che accompagnano questo dispositivo.
  • Page 6 Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.
  • Page 7 Advarsel VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.
  • Page 8 Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017 Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches).

  • Page 9: Installing The Chassis

    Rack-Mounting the Chassis Cisco 2600XM series and Cisco 2612 routers can be installed in 19-, 23-, and 24-inch racks. Use the standard brackets for mounting the chassis in a 19-inch rack; use the optional larger brackets for mounting the chassis in a 23- or 24-inch rack.
  • Page 10 The brackets for 19-, 23-, and 24-inch racks are shown in Figure 1. Figure 1 Brackets for Rack-Mounting of Routers with 1-RU Chassis Height Bracket for use Bracket for use with a with a 19-inch rack 23-inch or 24-inch rack Attaching Brackets Attach the mounting brackets to the chassis as shown in Figure 2 through Figure 8, using the screws provided.
  • Page 11 Figure 4 Bracket Installation for Rear Mounting in 19-Inch Rack Note: The second bracket attaches to the other side of the chassis. Figure 5 Bracket Installation for Rear Mounting: 19-Inch Rack with 17.75-Inch Opening, and 23- or 24-Inch Rack Note: The second bracket attaches to the other side of the chassis.
  • Page 12 Attaching Rubber Feet If you are mounting a Cisco 2600XM series or Cisco 2612 router on a wall, you must install the rubber feet that are supplied in the accessory kit. They provide a space for air circulation. Peel the rubber feet from the adhesive strip, and attach them onto the five round recesses on the bottom of the chassis.

  • Page 13: Installing On A Desktop

    Figure 9 Attaching the Brackets for Wall-Mounting SE RIA A/ S CN/L P CN/L P CN/L P CN/L P Attaching to Wall Attach the chassis to the wall: • Position the end nearest the power cable at the top. • Align screws (not included) with a wall stud, or use wall anchors. Installing on a Desktop If you are installing a Cisco 2610XM, Cisco 2620XM, or Cisco 2650XM series router on a desktop, you must install the rubber feet that are supplied in the accessory kit.

  • Page 14: Connect Cables

    Step 3 Attach the ground lug or ring terminal to the chassis as shown in Figure 10 or Figure 11. For the ground lug, use the two screws with captive locking washers provided. For a ring terminal, use one of the screws provided. Use a number 2 Phillips screwdriver, and tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).

  • Page 15: Power Connections

    DC Wiring Requirements A Cisco router with a DC-input power supply requires copper wire for the power connections. Table 2 summarizes the wiring requirements for Cisco 2600XM series and Cisco 2612 routers with a DC-input power supply. Note For installations compliant with the National Electric Code, AWG 14 (2.0 mm safety ground wire.
  • Page 16 Caution Do not overtorque the terminal block captive thumbscrew or terminal block contact screws. The recommended torque is 8.0 0.5 inch-lb (0.9 Figure 12 DC Power Connections for Cisco 2600XM Series and Cisco 2612 Routers (Typical) Negative On/off Ground Positive switch 0.05 N-m).

  • Page 17: Connecting Routers To The Cisco Redundant Power System

    • Cisco Modular Access Router Cable Specifications To locate these documents, see the “Where to Go Next” section on page 24. Table 3 summarizes some typical WAN, LAN, and voice connections for Cisco 2600XM series and Cisco 2612 routers. Table 3...

  • Page 18: Power Up The Router

    Power Up the Router Checklist for Power-Up You are ready to power up the Cisco router after you have completed the following steps: • Chassis is securely mounted and grounded. • Power and interface cables are connected. • Your PC terminal emulation program is configured for 9600 baud, 8 data bits, 1 stop bit, and no parity. •...

  • Page 19: Perform Initial Configuration

    You may see different startup messages: • If you see the following messages, the router has booted with a configuration file and is ready for initial configuration using the Cisco Router and Security Device Manager (SDM): yourname con0 is now available Press RETURN to get started.

  • Page 20: Initial Configuration Using Cisco Router And Security Device Manager

    Initial Configuration Using Cisco Router and Security Device Manager If the following messages appear at the end of the startup sequence, Cisco Router and Security Device Manager (SDM) is installed on your router: yourname con0 is now available Press RETURN to get started. For instructions on configuring your router by using SDM, refer to the Cisco Router and Security Device Manager (SDM) Quick Start Guide.
  • Page 21 Step 3 Enter a host name for the router (this example uses 2610): Configuring global parameters: Enter host name [Router]: 2610 Step 4 Enter an enable secret password. This password is encrypted (more secure) and cannot be seen when viewing the configuration: The enable secret is a password used to protect access to privileged EXEC and configuration modes.

  • Page 22: Initial Configuration Using The Cli (Manual Configuration)

    Step 11 The configuration appears: The following configuration command script was created: hostname 2610 enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx line vty 0 4 password xxxxxx snmp-server community public no ip routing interface FastEthernet0/0 no shutdown media-type 100BaseX half-duplex ip address 172.1.2.3 255.255.0.0 interface FastEthernet0/1 shutdown...

  • Page 23: Wan And Lan Interface Numbering

    Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers. See the “Where to Go Next” section on page 24 for information about accessing this document. Interface Numbering Each individual interface (port) on Cisco 2600XM series and Cisco 2612 routers is identified by number as described in the following sections. WAN and LAN Interface Numbering Cisco 2600XM series and Cisco 2612 router chassis contain the following WAN and LAN interface types: •...

  • Page 24: Voice Interface Numbering

    See the “Obtaining Additional Publications and Information” section on page 27 for help in locating these documents. To access documentation on Cisco.com: For Cisco 2600XM series platform documentation, start on Cisco.com at http://www.cisco.com, and select Products & Services > Routers > Cisco 2600 Series Multiservice Platforms > Technical Documentation > Document type >...

  • Page 25: Obtaining Documentation

    To access documentation using Cisco Connection Online (CCO): For Cisco 2600XM series platform documentation, start on Cisco.com at http://www.cisco.com, and click the “Technical Documentation” tab under Useful Links. Under the Product Documentation heading, navigate to Modular Access Routers and to the documentation for your router.

  • Page 26: Obtaining Technical Assistance

    Obtaining Technical Assistance For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support resources. In addition, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco service contract, contact your reseller.

  • Page 27: Obtaining Additional Publications And Information

    You can access Packet magazine at this URL: http://www.cisco.com/packet • iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions.
  • Page 28 Zimbabwe Copyright © 2004 Cisco Systems, Inc. All rights reserved. CCSP, the Cisco Square Bridge logo, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork...

This manual is also suitable for:

2612

Table of Contents

Save PDF