Chapters
Table of Contents
Related Manuals for NEC MultiSync EA242WU
Summary of Contents for NEC MultiSync EA242WU
- Page 1 User’s Manual Desktop Monitor MultiSync EA242WU ® MODEL: EA242WU, EA242WU-BK The regulations for this monitor applied to one of model names listed above. Please find your model name in the label on the rear side of the monitor.
-
Page 2: Table Of Contents
MENU TOOLS ..............41 SCREEN ................39 ECO INFORMATION ............43 COLOR ................40 INFORMATION ..............44 TOOLS ................40 OSD Warning ..............44 Manufacturer’s Recycling and Energy Information Appendix B Disposing of your old NEC product ........46 WEEE Mark (European Directive 2012/19/EU and amendments) ..............46 Energy Saving ..............46... -
Page 3: Registration Information
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by Sharp NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. -
Page 4: Tco Certified
DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA ® in the United States and other countries. MultiSync is a trademark or registered trademark of Sharp NEC Display Solutions, Ltd. in Japan and other countries. ® USB Type-C and USB-C are registered trademarks of USB Implementers Forum. - Page 5 Important Information Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property.
- Page 6 AROION Handle the power cord with care. Damaging the cord could lead to fire or electric shock. • Do not place heavy objects on the cord. PROHIBITED • Do not place the cord under the product. • Do not cover the cord with a rug, etc. •...
- Page 7 AROION Prevent tipping and falling for earthquakes or other shocks. To prevent personal injury or damage to the product caused by tipping over due to earthquakes or other shocks, make sure to install the product in a stable location and take measures to prevent PROHIBITED falling.
- Page 8 AROION Do not spill any liquids into the cabinet or use your product near water. Immediately turn off the power and unplug your product from the wall outlet, then refer servicing to qualified service personnel. It may cause an electric shock or start a fire. DO OOT ET Do not use flammable gas sprays to remove dust when cleaning the product.
- Page 9 CAUTIOO Handling the power cord. Handle the power cord with care. Damaging the cord could lead to fire or electric shock. • When connecting the power cord to the product’s AC IN terminal, make sure the connector is REQUIRED fully and firmly inserted. •...
- Page 10 CAUTIOO Do not push the product. The product may fall, causing damage to the product or personal injury. PROHIBITED Do not impact the LCD panel surface, it can cause serious damage to the product or personal injury. PROHIBITED Suitable for entertainment purposes at controlled luminous environments, to avoid disturbing reflections from the screen.
- Page 11 Power Cord Table European Plug Type North America U.K. Chinese Japanese Continental Plug Shape Region U.S.A./Canada U.K. China Japan Voltage 120* * Please use this power cord under 125 V power supply. OOTEN: This product can only be serviced in the country where it was purchased. Image Persistence Image Persistence, also called Image Retention, is a condition that occurs when a previously displayed image leaves a residual or “ghost”...
- Page 12 • Use the preset Color Setting. • Use non-interlaced signals. • Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast. For more detailed information on setting up a healthy work environment, write to the American National Standard for Human Factors Engineering of Computer Workstations - ANSI/HFES 100-2007 - The Human Factors Society, Inc.
-
Page 13: Product Features
Product Features • UXNA 24 inch idescreen Desktop Monitor 1920 × 1200 native resolution. Ultra-Narrow Bezel. • Productivity Provides stable and high-speed data communication by LAN (RJ-45) connection (see page 14). Transmits power delivery (65 W), video signal, and audio signal by a USB Type-C cable. USB Hub provides the connectibility of accessories such as a keyboard and mouse. -
Page 14: Installation And Connections
Installation and Connections Chapter 1 This Chapter IncludesN: > “Parts Name and Functions” on page 13 > “Installation” on page 16 > “Connections” on page 17 > “Flexible Arm Installation” on page 25 English−12... -
Page 15: Control Panel
Parts Oame and Functions Control Panel Item Function Detects the level of ambient lighting and the presence of a user, allowing the monitor to make adjustments to 1 Ambient Light Sensor various settings resulting in a more comfortable viewing experience. Do not cover this sensor. Human Sensor Enters sub-menus in the OSD menu when the OSD menu is open. -
Page 16: Terminal Panel
Terminal Panel Headphone USB Downstream (Type-A) Security Slot Label AC IN Connector HDMI IN DisplayPort OUT DisplayPort IN USB-C Port USB Downstream Port (Type-A) AC IO Connector LAO Port IO (RJ-45) Connects with the supplied power cord. A LAN-to-USB conversion function is equipped. Through the USB port, a connected computer can access to LAN connection. - Page 17 Installing a security cable As a security measure, you can secure the monitor to a fixed object with an optional security cable. Please follow the security cable supplier’s recommended instructions to install. OOTEN: A security cable (purchased separately) is designed as a deterrent, it is not guaranteed to prevent the device from being mishandled or stolen.
-
Page 18: Installation
Installation For box contents, please refer to the printed sheet provided in the box. The accessories included depends on the location where the monitor was shipped. Attach the base to the LCD monitor stand 1. Place the monitor face down on a non-abrasive surface (Figure 1). 2. - Page 19 Connections 1. Place your hands on each side of the monitor to tilt the panel to a maximum tilt angle and lift up to the highest position (Figure 3). Maximum Tilt (Up 35° Down 5°) Figure 3 2. Connect devices to the monitor. Turn off the power to your computer.
- Page 20 CAUTIOON: • Use the provided specified cables with this product so as not to interfere with radio and television reception. For DisplayPort, HDMI and USB-C, please use a shielded signal cable. Please use a shielded signal cable with ferrite core. Use of other cables and adapters may cause interference with radio and television reception.
- Page 21 5. Connect the power cord to a power outlet. OOTEN: • Please refer to the Caution section of this manual for proper selection of the AC power cord (see page • Please make sure that enough power is supplied to the monitor. Please refer to “Power Supply”...
- Page 22 Signal type and terminal connection Digital input • HDMI – High-definition digital video and audio signal connection to a computer, streaming media player, Blu-ray player, game console, etc. • DisplayPort – High-definition digital video and audio signal connection to a computer. •...
- Page 23 Connecting to a Computer with DisplayPort • Please use a certified DisplayPort cable. • It may take a moment for the signal to appear after turning on the computer. • When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear. •...
- Page 24 Connecting devices Connecting USB Devices • It may take a few seconds for the monitor to recognize the USB input. Do not disconnect the USB cable or disconnect and reconnect the USB cable before the monitor recognizes the input. • Before turning off the power switch of the monitor or shutting down Windows , please turn off the USB function and remove ®...
- Page 25 Multiple monitors connection You can daisy-chain monitors to each other using the DisplayPort OUT/IN connections on the monitors. For using connected monitors in MST (multi-stream transport) mode, the setting should be DP OUT MULTISTREAM “AUTO” for each monitor. Please change the setting for the monitor that connects to the computer last. If the monitors do not display an image, turn off the monitor connected to the computer then turn it back on.
- Page 26 Recovering from no image If the monitors do not display an image after configuring [DP OUT MULTISTREAM], please follow the instructions below: 1. Turn off the computer. 2. Touch the MENU key to open the [NO SIGNAL] OSD menu. 3. Touch the key to open the [VIDEO INPUT] menu.
- Page 27 Flexible Arm Installation This monitor is designed for use with a flexible arm. Contact us for more information. Follow the instructions provided by the manufacturer of the display mount. Use only VESA-compatible alternative mounting method. Remove the monitor stand before mounting. AROIONN: Please refer to “WARNING...
-
Page 28: Basic Operation
Basic Operation Chapter 2 This Chapter IncludesN: > “Using the OSD (On-Screen Display) Controls” on page 27 > “Changing the Input” on page 28 > “Power management function LED indicator patterns” on page 28 English−26... -
Page 29: Using The Osd (On-Screen Display) Controls
Using the OSD (On-Screen Display) Controls • To access the OSD menu, touch the MENU key. Main Menu Icons Adjustment Settings Sub-menu Press EXIT key to go back to the previous menu. Below is a brief summary of where controls are under each menu item. Tables listing all options available in the OSD menu are located in “Appendix A OSD Controls List”... -
Page 30: Changing The Input
Changing the Input Changing the Input To change the signal input, press the Input key. For HDCP Content HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material via the digital inputs, this does not necessarily mean that the monitor is not functioning properly. -
Page 31: Troubleshooting
Troubleshooting Chapter 3 This Chapter IncludesN: > “Screen Image and Video Signal Issues” on page 30 > “Hardware Issues” on page 31 > “Human Sensing function” on page 33 > “Using the Auto Brightness function” on page 34 English−29... -
Page 32: Screen Image And Video Signal Issues
Screen Image and Video Signal Issues Oo picture • Make sure the signal cable is fully connected to the monitor and the computer. • Make sure the computer’s display card is fully seated in its slot. • Make sure there is no DisplayPort converter adapter connected. The monitor does not support DisplayPort converter adapter. •... -
Page 33: Hardware Issues
Display image is not sized properly • Make sure that a Major Supported Timings has been selected for the display card in the system being used. (Please consult the manual for the system or display card for supported resolution and changing the settings.) •... - Page 34 The USB Hub does not operate • Check to make sure that the USB cable is properly connected. Refer to your USB device User’s Manual. • Check that the USB upstream port on the monitor is connected to the USB downstream port on the computer, and make sure the computer is ON.
-
Page 35: Human Sensing Function
Human Sensing function The Human Sensing function reduces power consumption by detecting the movement of a person. The [HUMAN SENSING] has following two settings: MODE HUMAO SEOSION SETTION Oo person in front of the monitor LIGHT BRIGHTNESS 0 % DEEP Power saving mode Image of human sensing operation A. -
Page 36: Using The Auto Brightness Function
Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting conditions. -
Page 37: Specifications
Specifications Chapter 4 This Chapter IncludesN: > “EA242WU” on page 36 English−35... - Page 38 EA242U Monitor Specifications MultiSync EA242U Ootes LCD Module Diagonal: 61.13 cm/24.1 inches Active matrix; thin film transistor (TFT) liquid crystal Viewable Image Size: 51.84 cm/20.4 inches display (LCD); 0.270 mm (H) x 0.270 mm (V) dot pitch; Native Resolution: 1920 x 1200 60 Hz 300 cd/m white luminance;...
-
Page 39: Osd Controls List
OSD Controls List Appendix A This Chapter Includes > “ECO TOOLS” on page 38 > “SCREEN” on page 39 > “COLOR” on page 40 > “TOOLS” on page 40 > “MENU TOOLS” on page 41 > “ECO INFORMATION” on page 43 >... -
Page 40: Eco Tools
ECO TOOLS ECO TOOLS Menu BRIGHTNESS Adjusts the overall image and background screen brightness. If [ECO MODE] is set to [1] or [2], a bar for [CARBON FOOTPRINT] will appear. CONTRAST Adjusts the overall image and background screen brightness by input signal level. OOTEN: This function is disabled when [L/B] is selected in the Color Control System. -
Page 41: Screen
ECO TOOLS Menu HUMAN SENSING The sensor detects the movement of a person by using the [HUMAN SENSING] function. The [HUMAN SENSING] function has three settings. OOTEN: Detects a person within about 1.5 m from the monitor. Does not function. 1 (LIGHT) After it detects that there is no person during a period of time, the monitor shifts to low brightness mode automatically to reduce the power consumption. -
Page 42: Multiple Monitors Connection
COLOR COLOR Menu Color Control System Color presets are available for adjusting color settings. 1, 2, 3, 4, 5 Increases or decreases the [RED], [GREEN] or [BLUE] color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. -
Page 43: Menu Tools
TOOLS Menu OFF TIMER The monitor will automatically power off after a period of time has passed, which you can set. Before powering off, a message will appear on the screen asking if you want to delay the turn off time by 60 minutes. - Page 44 MEOU TOOLS Menu OSD ROTATION This controls the OSD menu rotation. Depending on the image angle (monitor rotation), select a suitable [OSD ROTATION] setting. OOTEN: Please set the [KEY GUIDE] to [ON] to display the key guide. Setting (Angle) Image Key guide : LEFT : RIGHT...
-
Page 45: Eco Information
MEOU TOOLS Menu SENSOR INFORMATION If you select [ON], the monitor displays a “HUMAN SENSOR ON” message. If you select [OFF], the monitor doesn’t display the “HUMAN SENSOR ON” message. KEY GUIDE If you select [ON], the Key Guide appears on screen when the OSD menu is accessed. CUSTOMIZE SETTING Store the current settings for easy recovery. -
Page 46: Information
IOFORMATIOO IOFORMATIOO Menu INFORMATION Provides information about the current input signal, the model, serial numbers and USB-C port’s status of your monitor. OSD arning OSD warning messages close by touching the MENU key. OO SINOALN: This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there is a change of input signal, the “OO SINOAL”... -
Page 47: Weee Mark (European Directive 2012/19/Eu And Amendments)
Appendix B Energy Information This Chapter IncludesN: > “Disposing of your old NEC product” on page 46 > “Energy Saving” on page 46 > “WEEE Mark (European Directive 2012/19/EU and amendments)” on page 46 We are strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. - Page 48 All required information concerning the disposal of the product and country-specific information on recycling facilities can be found on our following websites: https://www.sharpnecdisplays.eu/p/hq/en/home.xhtml (in Europe), https://www.sharp-nec-displays.com/jp/ (in Japan) or https://www.sharpnecdisplays.us/ (in USA). Energy Saving This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor, the Energy Saving mode is activated.