Table of Contents
Advertisement
Operation Manual / A130-H.. - A140-H..
9 Dismantling and fitting / 9.3 Removing the air inlets
9.3
Removing the air inlets
Mark the casing position for assembly.
u
Fig. 35: Removing the air inlets
1. Attach lifting gear to the filter silencer (81000) or air suction branch (82000).
2. Loosen and remove V-clamp (72020).
3. Remove filter silencer (81000) or air suction branch (82000), set it down properly in an
appropriate place and secure it.
4. Remove and dispose of the O-ring (81010 / 82010).
© Copyright 2021 ABB. All rights reserved.
HZTL4030_EN
Rev.G
July 2021
Advertisement
Chapters
Table of Contents
