Table of Contents
Advertisement
Quick Links
MICROWAVE/ WALL OVEN COMBINATION
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
Your new wall oven has been designed to fit a limited variety of cutout sizes to make the job of installing easier. The
first step of your installation should be to measure your current cutout dimensions and compare them to the cutout
dimensions chart below for your model. You may find little or no cabinet work is necessary.
Do not remove spacers (if equipped) on the side walls and/or on the back of the built-in oven.
These spacers center the oven in the space provided. The oven must be centered to prevent excess heat
buildup that may result in heat damage or fire.
NOTES:
1. Base must be capable of supporting 225 pounds (102 kg).
2. Allow at least 21" (53.3cm) clearance in front of oven for door
depth when it is open.
3. Dimension G (cutout depth) is
critical to the proper installation
of the built-in oven. If the
oven decorative trim does not
butt against the cabinet verify
dimension G to assure it is the
required depth.
* Suggested distance from floor
is 11½" (29.2 cm).
Minimum required distance is
4 ½" (11.4 cm)
MODEL
27" (68.8cm) Wall Oven
30" (76.2cm) Wall Oven
MODEL
27" (68.8cm) Wall Oven
30" (76.2cm) Wall Oven
All dimensions are stated in inches and (cm).
Printed in USA
INSTALLATION INSTRUCTIONS
B
Door Open
(see note 2)
A
PRODUCT DIMENSIONS
A
27 (68.6)
30 (76.2)
CUTOUT DIMENSIONS AND CABINET WIDTH
F
Min.
Max.
24
/
25¼ (64.1)
7
8
(63.2)
28½ (72.4)
29 (73.7)
1" (2.5 cm)
Min.
C
H
40-4/5"
40-15/16"
(104 cm)
11½"
(29.2 cm)
Spacer
D
2" (5 cm) Wide Wood
Spacer if Needed
Figure 1
B
424/5 (108.8)
245/8 (62.5)
42¼ (107.7)
281/4 (71.8)
G. Min.
Min.
23¾ (60.3)
41
/
(104.5)
1
8
23¾ (60.3)
41
/
(104.5)
1
8
1
United States
and Canada
Hole for
Cable
I
(right or
left side
depending
on model)
G
F
3" (7.6 cm)
1¼"
Electrical
(3.2 cm)
Junction Box
Min.
(right or left side)
C
D
243/4 (62.9)
243/4 (62.9)
H
Max.
I
41¼ (104.8)
27
/
(68.9) Min
1
8
41¼ (104.8)
30
/
(76.5) Min
1
8
P/N 807611004 (1903) Rev. B
English – pages 1-8
Español – páginas 9-16
Français - pages 17-24
Max.
Advertisement
Table of Contents
Related Manuals for Frigidaire FGMC2766UDA
Summary of Contents for Frigidaire FGMC2766UDA
- Page 1 MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS United States INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. and Canada IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 2: Important Safety Instructions
MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS 2. Electrical Requirements Important Notes to the Installer 1. Read all instructions contained in these installation This appliance must be supplied with the proper instructions before installing the combination oven. voltage and frequency, and connected to an individual, 2. -
Page 3: Electrical Connection
MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS (If your appliance is equipped with a white neutral conductor.) This appliance is manufactured with a white neutral Electrical Shock Hazard power supply and a frame connected copper wire. The • Electrical ground is required on this appliance. frame is grounded by connection of grounding lead to •... -
Page 4: Cabinet Installation
MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS 4. Cabinet Installation If oven is used in a new branch circuit installation (1996 NEC), mobile home, recreational vehicle, or IMPORTANT NOTE where local codes DO NOT permit grounding through the neutral (white) wire, the appliance frame MUST Do not lift the oven by the door handle. -
Page 5: Tip Over Hazard
MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS 6. Install the Anti-tip Mounting Screws 7. Adjust Microwave Front Frame Screws The wall oven can tip when the door is Use a manual screwdriver to adjust the screws open. The anti-tip mounting screws supplied with the on the microwave front frame for a flush fit (see wall oven must be installed to prevent tipping of the figure 7). - Page 6 MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS 8. Install the Bottom Trim All 27" Models: A. Place the color matched trim (B) in place as Bottom trims must be installed for shown in Figure 9. Line up screw locations and the oven to function properly. DO NOT operate the attach both ends.
-
Page 7: Checking Operation
MICROWAVE/ WALL OVEN COMBINATION INSTALLATION INSTRUCTIONS 5. Leveling the Wall Oven 6. Checking Operation 1. Install an oven rack in the center of the upper oven Your model is equipped with an Electronic Oven (see Figure 10). Control. Each of the functions has been factory 2. - Page 8 NOTES...