Table of Contents
Advertisement
TABLE OF CONTENTS
Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................12
User controls..................................................................................13
Troubleshooting............................................................................19
Advertisement
Table of Contents
Related Manuals for Acer S202HL
Summary of Contents for Acer S202HL
-
Page 1: Table Of Contents
TABLE OF CONTENTS Special notes on LCD monitors ... 1 Information for your safety and comfort ... 2 Unpacking ... 5 Attaching/Removing the base ... 6 Screen position adjustment ... 6 Connecting the power cord ... 7 Safety precaution ... 7 Cleaning your monitor ... -
Page 2: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 3: Information For Your Safety And Comfort
Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. -
Page 4: Product Servicing
Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •... -
Page 5: Taking Care Of Your Vision
Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. ----------------------------------------------------------------------------------------------------- For more information and help in recycling, please visit the following websites: Worldwide: http://www.acer-group.com/public/Sustainability/sustainability01.htm http://www.acer-group.com/public/Sustainability/sustainability04.htm EN-4... -
Page 6: Unpacking
UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. · · LCD Monitor AC Adapter · · · D-Sub Cable DVI Cable AC Power Cord... -
Page 7: Attaching/Removing The Base
Attaching the Base -------------------------------------------------------------------- Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. Attach the the monitor stand arm to the base. Ensure that the base is locked onto the monitor stand arm. -
Page 8: Connecting The Power Cord
CONNECTING THE POWER CORD · Check first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. ·... -
Page 9: Power Saving
Power saving The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. State Light Blue Power Saving Amber Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. -
Page 10: Connector Pin Assignment
CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION Monitor Ground DDC-return R-Ground G-Ground B-Ground PIN NO. Green Blue EN-9 DESCRIPTION Logic Ground Monitor Ground DDC-Serial Data H-Sync V-Sync DDC-Serial Clock... - Page 11 24-Pin Color Display Signal Cable* Meaning TMDS Data2- TMDS Data2+ TMDS Data 2/4 Shield DDC Clock DDC Data TMDS Data1- TMDS Data1+ TMDS Data 1/3 Shield * only for certain models Meaning +5V Power Logic Ground Hot Plug Detect TMDS Data0- TMDS Data0+ TMDS Data 0/5 Shield TMDS Clock Shield...
-
Page 12: Standard Timing Table
Standard Timing Table Mode VESA VESA VESA WXGA+ WXGA+ Resolution 640x480 640x480 640x480 640x480 66.66 720 40 800 60 800 60 800 60 800 60 2x 24 74.55 024 768 024 768 024 768 152 870 152x864 1280x 600x900 EN-11... -
Page 13: Installation
INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. Connect the digital cable (only for dual-input models). -
Page 14: User Controls
Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Empowering: Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. AUTO Auto Adjust: Press this button to activate the Auto Adjustment function. -
Page 15: Operation Instructions
Acer eColor Management Operation instructions Step 1: Press “ “ Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “ “ or “ Step 3: Press “ AUTO “ Key to confirm the mode and exit the eColor menu. -
Page 16: Adjusting The Osd Settings
Adjusting the OSD settings -------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. -
Page 17: Adjusting The Osd Position
Adjusting the OSD position 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-16... -
Page 18: Adjusting The Setting
Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the keys, select the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings. Setting from the OSD. -
Page 19: Product Information
Product information 1 Press the MENU key to bring up the OSD. 2 Using the keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-18... -
Page 20: Troubleshooting
TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON LED OFF No Picture LED displays amber color Unstable Picture Display is missing, center... - Page 21 DVI mode Problems Current Status Remedy LED ON LED OFF No Picture LED displays amber color · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. · Check the power switch. · Check if AC power cord is properly connected to the monitor.
-
Page 22: Declaration Of Conformity
Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, E-mail: easy_lai@acer.com.tw And, Acer Europe SA Via Cantonale, Centro Galleria 2 6928 Manno Switzerland Hereby declare that:... -
Page 23: Federal Communications Commission Declaration Of Conformity
Name of Responsible Party: Address of Responsible Party: 333 West San Carlos St. Contact Person: Phone No.: Fax No.: Acer America Corporation 333 West San Carlos St., San Jose LCD Monitor S202HL S202HL xxxxxx (“x” = 0~9, a ~ z, A ~ Z or Blank)