Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita TW160DZ
Summary of Contents for Makita TW160DZ
- Page 1 INSTRUCTION MANUAL Cordless Impact Wrench TW160D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: TW160D Fastening capacities Standard bolt M8 - M16 High tensile bolt M6 - M12 Square drive 9.5 mm No load speed Hard impact mode 0 - 2,400 min Soft impact mode 0 - 1,300 min Impacts per minute Hard impact mode 0 - 3,600 min Soft impact mode... -
Page 3: Ec Declaration Of Conformity
Electrical Safety Vibration Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any The vibration total value (tri-axial vector sum) deter- adapter plugs with earthed (grounded) power mined according to tools. Unmodified plugs and matching outlets will EN62841-2-2: reduce risk of electric shock. Work mode: impact tightening of fasteners of the maxi- Avoid body contact with earthed or grounded mum capacity of the tool surfaces, such as pipes, radiators, ranges and... - Page 4 Do not let familiarity gained from frequent use Keep handles and grasping surfaces dry, of tools allow you to become complacent and clean and free from oil and grease. Slippery ignore tool safety principles. A careless action can handles and grasping surfaces do not allow for cause severe injury within a fraction of a second.
- Page 5 SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. WARNING: DO NOT let comfort or familiarity Use of non-genuine Makita batteries, or batteries that with product (gained from repeated use) replace have been altered, may result in the battery bursting strict adherence to safety rules for the subject causing fires, personal injury and damage. It will product.
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. CAUTION: The tool will automatically stop during operation if the Always be sure that the tool is tool and/or battery are placed under one of the following switched off and the battery cartridge is removed conditions: before adjusting or checking function on the tool. Overloaded: Installing or removing battery The tool is operated in a manner that causes it to draw an abnormally high current. - Page 7 Switch action ► 1 . Button Pull the switch trigger to turn on the lamp. To turn off, ► 1 . Switch trigger release it. The lamp goes out approximately 10 seconds after releasing the switch trigger. CAUTION: Before installing the battery car- To keep the lamp off, turn off the lamp status. First pull tridge into the tool, always check to see that the and release the switch trigger.
- Page 8 This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for coun- terclockwise rotation. When the reversing switch lever is in the neutral posi- tion, the switch trigger cannot be pulled.
-
Page 9: Operation
ASSEMBLY OPERATION CAUTION: CAUTION: Always be sure that the tool is Always insert the battery cartridge switched off and the battery cartridge is removed all the way until it locks in place. If you can see the before carrying out any work on the tool. red indicator on the upper side of the button, it is not locked completely. Insert it fully until the red indicator Selecting correct impact socket... -
Page 10: Maintenance
OPTIONAL (408) ACCESSORIES (204) CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of 1. Fastening time (second) 2. Fastening torque injury to persons. Only use accessory or attachment for its stated purpose. NOTE: Hold the tool pointed straight at the bolt or nut. - Page 11 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885689-229 www.makita.com 20181012...