Page 1
B683 Quick Start Note: The following illustrations are provided for your reference only. For details about the model you selected, please examine the actual device to determine where features are located. Check the information about the product and its accessories when you purchase it.
Page 2
(Optional) Scenario 2: You can connect a telephone set to the telephone port of the device to make voice calls. Appearance 1. Power button 8. LAN indicators 2. Wi-Fi/WPS button 9. External antenna port 3. Dial-up button 10. Telephone port 4.
Page 3
Indicators Indicator Status Steady on: USB storage device connected Off: USB storage device not connected USB indicator Steady on: Wi-Fi activated or data transfer in progress Blinking: Establishing a WPS connection Wi-Fi/WPS indicator Off: Wi-Fi not activated Red, fast-blinking: Faulty SIM card (SIM card not inserted or malfunctioned, or PIN verification failed) Yellow, steady on: Successfully registered...
PC Configuration Requirements Recommended PC configurations are as follows: CPU: Pentium 500 MHz or higher Memory: 128 MB RAM or higher Hard disk: 50 MB disk space available Operating system: Windows 2000, Windows XP, Windows Vista, or Windows 7 LCD resolution: At least 800 x 600 pixels. A resolution of 1024 x 768 pixels is recommended Web browser: Microsoft Internet Explorer 6, Internet Explorer 7, or Internet Explorer 8, Firefox 3.5 or 3.6, Safari 3.0, Opera 10.5, or Chrome...
Page 5
(Optional) Installing the Table Stand Your device can be placed horizontally, be placed upright with the use of a table stand, or hung on the wall. Place your device on a surface well above the floor or near a window, so it can receive a strong signal. Insert the latches on the table stand into the slots on the back of the device.
Page 6
(Optional) Installing the External Antenna Connect the external antenna to the device's external antenna port. Install the antenna securely by screwing it completely into the antenna jack. You need to first set the antenna mode to external on the management page (http://192.168.1.1).
Page 7
Connecting the Device to a PC Using an Ethernet Cable If the indicator for the LAN port to which the Ethernet cable is connected is on, the connection is active. The network cable connecting to the PC must not be longer than 100 meters (328 feet). Connecting the Device to a USB Disk, Mobile Disk, or USB Printer Your device can be connected to a USB disk, mobile disk, or USB printer...
Connecting the Power Supply Attention: Use a power adapter that is compatible with the device or else the device may be damaged. Powering On/Off the Device After connecting the power supply, the device will power on automatically. Press and hold until all indicators turn off to power off the device.
Page 9
Step 2. Establishing a Wi-Fi Connection Establishing a Wi-Fi Connection (Using a PC as an Example) Note: Before establishing a Wi-Fi connection, you must ensure that your computer is equipped with a wireless network adapter. If it is clear that the computer has a wireless network connection, then the wireless network adapter can be used.
Accessing the Internet After a connection between your device and the client is active, you use the following modes to access the Internet. Attention: Please select a proper Internet connection mode according to your network charges. For example, if you are using time-based service, Manual mode is recommended.
Restoring Factory Defaults If you become uncertain of which parameters you have set or changed, you can restore the factory defaults which the device came with and set the parameters again. RESET: Use a sharply pointed object to press and hold the RESET button until all indicators ( ) are blinking.