hit counter script
Download
Share
Print this page
Huawei SmartLogger1000 Quick Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Inverter
  5. SmartLogger1000
  6. Quick manual

Huawei SmartLogger1000 Quick Manual

Hide thumbs Also See for SmartLogger1000:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Replacing the SmartLogger1000 with the
SmartLogger3000 Quick Guide
Issue: 03
Date: 2020-11-11
1. The information in this document is subject to change due to version upgrade or other
reasons. Every effort has been made in the preparation of this document to ensure accuracy
of the contents, but all statements, information, and recommendations in this document do
not constitute a warranty of any kind, express or implied.
2. Before replacing the device, carefully read the
with the product information and precautions.
3. Before replacing the device, check whether the SmartLogger1000 settings can be viewed. If
yes, record them for setting or checking parameters after the replacement.
4. Before replacing the device, check whether the cables are long enough. If not, prepare
appropriate cables.
1
Exporting All Files/All Configuration Files
•
You can export all files or all configuration files in either of the following methods:
SmartLogger1000 LCD and SmartLogger WebUI. The difference is that the files exported by the
SmartLogger1000 LCD are more comprehensive and contain performance files such as energy
yield data. The files exported by the SmartLogger WebUI do not contain performance files. The
export takes 5 to 30 minutes, depending on the device running time.
•
You are advised to prepare a USB flash drive of SanDisk, Netac, or Kingston. Other brands may
be incompatible.
Method 1: SmartLogger1000 LCD (All Files)
1. On the default screen, press
to go to the main menu screen.
2. Choose
and press
to log in to the system.
•
Because of permission restriction, set User Name to Advanced User or Special User. The initial
password is 000001.
•
Use the initial password upon first power-on and change it immediately after login. To ensure
account security, change the password periodically and keep the new password in mind. Not
changing the initial password may cause password disclosure. A password left unchanged for a
long period of time may be stolen or cracked. If a password is lost, devices cannot be accessed.
In these cases, the user is liable for any loss caused to the PV plant.
•
After the authentication succeeds, the authentication information will be valid for 30 seconds. If
you exit from the system and log in again within 30 seconds, no authentication is required.
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
SmartLogger3000 User Manual
to get familiar
3. Insert a USB flash drive and wait for 10 seconds. Then, choose Export all data files.
4. After the export is complete, tap Confirm.
The export is successful. The LCD turns off 5 minutes after the export.
Method 2: SmartLogger1000 WebUI (All Configuration Files)
1. In the address box of a browser, enter https://
the SmartLogger) and press Enter.
The login page is displayed.
•
Log in as Advanced User. The initial password is Changeme.
• Use the initial password upon first power-on and change it immediately after login. To
ensure account security, change the password periodically and keep the new password in
mind. Not changing the initial password may cause password disclosure. A password left
unchanged for a long period of time may be stolen or cracked. If a password is lost, devices
cannot be accessed. In these cases, the user is liable for any loss caused to the PV plant.
2. Choose Maintenance > System Maint. Click Export under Full profile export.
A dialog box is displayed, indicating that all configuration files are to be exported.
3. Click Confirm, enter the password again, and click Submit.
The Exporting progress bar is displayed.
4. After the export is successful, click Confirm.
5. Click Save under Full profile export to save all configuration files.
2
Replacing the SmartLogger
All cables are routed through the cable trough. After the deployment is complete, close the
cable trough in time.
Scenario 1: Inside a Combiner Box
1. Switch off the switch between the combiner box and upper-level and lower-level devices.
1
XX.XX.XX.XX
XX.XX.XX.XX
(
is the IP address of

Advertisement

loading

Related Manuals for Huawei SmartLogger1000

Summary of Contents for Huawei SmartLogger1000

  • Page 1 The export is successful. The LCD turns off 5 minutes after the export. with the product information and precautions. Method 2: SmartLogger1000 WebUI (All Configuration Files) 3. Before replacing the device, check whether the SmartLogger1000 settings can be viewed. If yes, record them for setting or checking parameters after the replacement. XX.XX.XX.XX XX.XX.XX.XX...
  • Page 2 2. Remove the 4G router under the SmartLogger1000 and label the cables. 3. Remove cables connected to the SmartLogger1000 and label them. 4. Remove the four screws from the SmartLogger1000 rear panel and remove the SmartLogger1000. 7. Mount the SmartLogger3000 to the spare board using mounting ears and tighten the screws.
  • Page 3 9. Replace the terminal of the RS485 cable with the terminal delivered with the SmartLogger3000. Cable Label Terminal or Port JX03-1 Ensure that the RS485+ and RS485- terminals are respectively connected to the COM+ and JX03 wiring terminal of the combiner box COM- ports on the SmartLogger.
  • Page 4 2. Remove cables connected to the SmartLogger1000 and label them. Use the spare PE cable of the SmartLogger3000. 3. Remove the SmartLogger1000 that is installed using guide rails from the communications cabinet. No tool is required. 4. Remove the mounting ears from both sides of the SmartLogger3000 and install the SmartLogger3000 in the communications cabinet.
  • Page 5 Scenario 3: On a Wall 1. Remove cables connected to the SmartLogger1000 and label them. 2. Lift the SmartLogger1000 upwards along the wall and lift it outwards to remove it. 5. Replace the terminal of the RS485 cable with the terminal delivered with the SmartLogger3000.
  • Page 6 Scenario 4: On a Desktop 1. Remove cables connected to the SmartLogger1000 and label them. 2. Replace the SmartLogger1000 with the SmartLogger3000 and place the latter on a horizontal desktop. 3. For details about cable connections, see "On a Wall."...
  • Page 7 Method 2: SmartLogger3000 WebUI • Log in as installer. The initial password is 00000a. • Use the initial password upon first login and change it immediately after login. To ensure 1. In the address box of a browser, enter https:// XX.XX.XX.XX XX.XX.XX.XX is the IP address of...
  • Page 8 In the lower right corner of the page, check that the SmartLogger3000 is properly connected in the Device Self-Discovering area. The SmartLogger3000 automatically connects to the hosting cloud. Log in to the Huawei hosting Right-click the SmartLogger1000 diagram element, click Fast Replace, and enter the SN cloud, choose Device Management, and verify that the SmartLogger3000 has been connected of the SmartLogger3000.

This manual is also suitable for:

Smartlogger3000