Control Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various
functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one shown. This
doesn't change the way it operates.
Speed Bake Pad- Used
to enter the speed bake
mode temperature (some
models).
Feature indicator
lights- These light
show which
feature is in use.
Bake
Bake
Pad
Broil
Used to enter
the normal
baking mode
temperature.
Broil Pad- Used
Keep Warm
to select the
Pad- Used to
variable broil
set the Keep
function.
Warm feature.
The oven can be programmed to:
Bake normally, Speed Bake, Keep warm, Time Bake,Delay Start (delayed bake), Broil, Clean and Speed Clean.
Note: Push buttons or pads may be shaped differently.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold START TIME pad for 7 seconds. "- -" or "SP" appears in the
display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation and silent operation
mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation
mode.
Temperature Conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory.
The oven can be programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be
in a Bake or Clean mode):
1. Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.
2. Press the UP or DOWN ARROW pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press CLEAR/OFF pad to accept the changes.
ELECTRONIC OVEN CONTROL
Note: The oven function will not work if the time of day clock is not set.
Speed Clean
Bake Time
Pad- Used to
Pad- Used to
select the speed
enter the length
clean cycle
of the baking
(some models).
time.
Speed
Bake
Speed
clean
time
bake
Keep
Start
Clean
warm
time
Clean Pad
Start Time Pad- Used
Used to
to set the desired start
select the
time for baking. Can be
self-
used with BAKE TIME
cleaning
to program a delayed
cycle.
bake cycle.
(Fahrenheit / Celsius)
Up and Down arrow pads- Used along with
the function pads to select oven temperature,
cooking time, start time (when programming
an automatic start time), time of day, clean
time and minute timer.
Speed Bake Oven
Oven
Preheat
Door Locked
Oven, Preheat & Lock lights- The "oven" light indicates
that the oven is functionning. The "Preheat" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature.
The "Door Locked" light will flash until the door locks when
the self-clean cycle is in use. It glows constantly after the door
locks (some models).
1
Clock Pad- Used to
set the time of day.
Oven Interior Light
Pad- Used to turn
oven interior light ON
and OFF.
Clear Pad- Used to
clear any function
previously entered
Oven
Clock
light
except the time of day
and minute timer.
Push Clear pad to
stop cooking.
Clear
Timer
/Off
On/Off
Timer Pad- Used to
Controls
set or cancel the
minute timer. The
minute timer does not
start or stop cooking.
Versión en español
Si desea obtener una copia en
español de este Manual del
Usuario, sírvase escribir a la
dirección que se incluye a
continuación. Solicite la P/N
318200189E.
Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
Dublin, Ohio 43017-0961
318200189 (0406) Rev. A