WASHING MACHINE P1405J P1205J P1005J P805J SERVICE Manual WASHING MACHINE CONTENTS Caution for the safety during servicing 1. SPECIFICATIONS 2. OVERVIEW OF THE WASHING MACHINE 3. OVERVIEW OF THE CONTROL PANEL 4. GENERAL ERROR FUNCTION 5. TROUBLE DIAGNOSIS 6. TEST MODE 7.
Page 2
19. When the wash-heater is replaced, check it is inserted in the bracket-heater and screw the nut. If the wash-heater is not inserted in the bracket-heater properly, this may cause the noise and leakage since it is contacted to the drum. SAMSUNG ELECTRONICS CO., LTD...
2 min when the abnormal frequency of 25.24KHz is detected. - Display shows ‘E8’. - This error can be cleared by POWER S/W OFF. 9. WATER LEAKAGE ERROR (E9) - Water Leakage error occures when water is drained naturally after washing program starts. SAMSUNG ELECTRONICS CO., LTD...
3) As the P.C.B assembly is designed for no trouble, do not replace the P.C.B assembly by the wrong diagnosis and follow the procedure of the trouble diagnosis when the micom is not operated normally. SAMSUNG ELECTRONICS CO., LTD...
Page 8
The heating is not executed. - Is the wash heater terminal unplugged? - Is the wash heater normal? - If above points are not found, the PCB assembly is out of order. Replace it. SAMSUNG ELECTRONICS CO., LTD...
POWER S/W “4” on. (Whole lamps turn on and display show “tl” after 3 Seconds.) B. Press the “1” key and display shows “t2” C. Press the “3” key and display shows the inside temperature of tub. SAMSUNG ELECTRONICS CO., LTD...
1) Capacity : AC 230V/2000W 2) Location : Bottom of TUB 3) Function : Raise the water temperature Thermistor supplied at the wash process. 4) Resistance value : 23Ω ~ 29Ω 5) Thermal Fuse : 128°C SAMSUNG ELECTRONICS CO., LTD...
5) Part the diaphragm and the wire diaphragm away from the frame-front. 6) Remove the eight screws fixing the frame-front. 7) It’s possible to exchange and service the heater, the pump, the shock-absorber and the door lock s/w. LEVER SAMSUNG ELECTRONICS CO., LTD...
Page 16
Motor Assemble Hole 5. How to Assemble the RELAY Housing. Relay <CAUTION> Insert the Relay Housing to the Relays on the opposite direation each other. [Relay Housing Color] Relay Housing (A) WHITE BLUE Relay Housing (B) SAMSUNG ELECTRONICS CO., LTD...
17mm. Vice pliers Tool to protect the idle and abrasion of the bolt for the box driver. Other(Driver, Nipper, Long nose) General tools for the after service. JIG for the Tub 1 (Disassemble and Assemble) SAMSUNG ELECTRONICS CO., LTD...