hit counter script
Fujitsu Stylistic Q555 Operating Manual

Fujitsu Stylistic Q555 Operating Manual

Hide thumbs Also See for Stylistic Q555:
Table of Contents

Advertisement

Quick Links

System
Operating Manual
FUJITSU Tablet STYLISTIC Q555

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu Stylistic Q555

  • Page 1 System Operating Manual FUJITSU Tablet STYLISTIC Q555...
  • Page 2 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 2014 Fujitsu Technology Solutions GmbH. All rights reserved B5FK-5391-01ENZ0-00...
  • Page 3 FUJITSU Tablet STYLISTIC Q555 Operating Manual Fujitsu Contact Information Notational conventions Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC (optional) Security functions Connecting external devices Settings in BIOS Setup Utility...
  • Page 4 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.
  • Page 5: Table Of Contents

    Contents Contents Fujitsu Contact Information ........................7 Notational conventions ..........................8 Ports and controls ............................9 Important notes ............................11 Safety instructions ............................11 Additional safety notes for devices with wireless components ............... 12 Protecting the display screen ........................12 Energy saving ..............................
  • Page 6 How to remove USB devices correctly ....................63 Connecting external audio devices ......................64 Headphones port ............................ 64 Microphone port (performance docking cradle only) ................. 64 Settings in BIOS Setup Utility ........................65 Starting the BIOS Setup Utility ........................65 Fujitsu...
  • Page 7 Folio case (optional)............................82 Micro USB adapters (optional) ........................82 Manufacturer’s notes ..........................83 Disposal and recycling ..........................83 Recycling your battery ........................... 83 DOC (Industry CANADA) Notices ....................... 83 UL Notice ..............................84 ENERGY STAR Compliance ........................85 Fujitsu...
  • Page 8 Restore the Recovery Image for Full Hard Drive ................100 Recovering Your Recovery Image Using Recovery and Utility (for new hard drive or non-bootable hard drive) ........................101 Installing the Software after the Recovery Image is Restored ............102 Index ................................105 Fujitsu...
  • Page 9: Fujitsu Contact Information

    Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or or Windows 8/8.1 operating system, you will need to go to the Support Site to download the...
  • Page 10: Notational Conventions

    Cross-references to another section, e.g. "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://solutions.us.fujitsu.com/" • names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
  • Page 11: Ports And Controls

    6 = Eyelet for stylus cord 1 = DC input connector (DC IN) 7 = Speaker 2 = Micro HDMI port 8 = Security Lock device 3 = Headphone port 4 = SmartCard reader (device dependent) 5 = Storage card slot (protected by cover) Fujitsu...
  • Page 12 8 = USB port (USB 2.0) 4 = Shortcut button 9 = USB port (USB 3.0) 5 = Decrease volume button Rear 1 = Screw holes for mounting accessories 4 = Camera light 2 = Fingerprint sensor 5 = Webcam 3 = Webcam LED Fujitsu...
  • Page 13: Important Notes

    This Tablet PC complies with the relevant safety regulations for data processing equipment. If you have questions as to whether you can set up the Tablet PC in the intended environment, please contact your sales outlet or our hotline/service desk. Fujitsu...
  • Page 14: Additional Safety Notes For Devices With Wireless Components

    You save money and help protect the environment. Energy saving under Windows ► Make use of the available energy-saving functions as described in chapter "Using the energy saving functions", Page Traveling with your Tablet PC Please follow the instructions below when traveling with your Tablet PC. Fujitsu...
  • Page 15: Before You Travel

    Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...
  • Page 16: Transporting The Tablet Pc

    ► To prevent the device from being switched on unintentionally, remove the AC plug of the AC adapter from the power outlet. The surfaces may be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. Fujitsu...
  • Page 17: First-Time Setup Of Your Device

    ► Unpack all the individual parts. ► Check your device for any visible damage which may have occurred during transportation. You may need to reuse the packaging in the future, for example if you need to ship your device. Fujitsu...
  • Page 18: Choose A Location

    ► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...
  • Page 19: Switching On The Device For The First Time

    If a Windows 8.1 operating system is installed on your Tablet PC, a tutorial is automatically started when a new user logs on for the first time, which shows you how to use the new functions of Windows 8.1. Fujitsu...
  • Page 20: Installing Bonus Apps

    There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu...
  • Page 21: Working With The Tablet Pc

    "Important notes", Page Battery charging indicator The battery charging indicator (1) gives information about the status of the power supply. Status / color Description The battery is being charged. On (red) The Tablet PC is switched off or in Save-to-Disk mode. Fujitsu...
  • Page 22: Switching The Tablet Pc On

    Windows 8.1 Desktop - Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...
  • Page 23: Switching The Tablet Pc Off

    10 seconds (forced shutdown). Handwriting recognition For detailed information on handwriting recognition, see the documentation for your operating system. Under Windows 8.1 you can set the required language under Control Panel – Time, Language and Region – Language. Fujitsu...
  • Page 24: Touchscreen

    In Windows 8.1 wipe your finger over the screen from the right-hand edge. The setting Charms - Devices - Second monitor opens. Select the desired output type. You can also use the Fujitsu Display Manager in the Windows Mobility Center to set the output type. Fujitsu...
  • Page 25: Select Display Orientation (Portrait Or Landscape Format)

    To switch off the automatic changing between portrait and landscape format, select Control Panel - Appearance and Personalization - Display - Screen Resolution. In the Fujitsu Tablet Controls settings, profiles are saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desired.
  • Page 26: Actions With One Finger (Windows 8.1 Modern)

    Windows button + button). Wipe from the top to the bottom of the screen to dock or close the current App. ► Working with the mouse: Right-click on the App to display the App commands. Fujitsu...
  • Page 27 ► Use this function to scroll through lists or Scroll / Move object / Swivel object websites or to swivel or move an object. ► Working with the mouse: Left-click on the object, keep the mouse button pressed and move / swivel the object or scroll. Fujitsu...
  • Page 28: Actions With One Finger (Windows 8.1 Desktop)

    Opening a context menu (click with the right mouse button) Keep your fingertip pressed against the touchscreen. The context menu appears. ► Position one finger on the touchscreen and Moving the cursor move your fingers in the desired direction. Fujitsu...
  • Page 29: Actions With Two Fingers (Windows 8.1 Desktop)

    ► Place two fingers on the touchscreen. ► Move the fingers up to scroll up. ► Move the fingers down to scroll down. Rotating ► Position your thumb on the touchscreen and rotate the image clockwise or anticlockwise using your index finger. Fujitsu...
  • Page 30 ► Put two fingers on the touchscreen and move them together to decrease the size of the zoom/view. ► Use two fingers to tap twice in quick Lock context-sensitive menus succession on the touchscreen. Fujitsu...
  • Page 31: Using The Stylus

    The screen responds to entries made with the tip of the finger or the stylus when the tip of the finger or the stylus directly touches the screen. You can use the stylus to perform almost all functions for which you would otherwise use a mouse. Fujitsu...
  • Page 32: Stylus Location

    Adjusting the stylus Operating system Menu Windows 8.1 Under Windows 8.1 Desktop - Control Panel - Hardware and Sound - Pen and Touch Input you can make various settings for the stylus (assignment and function of the stylus button). Fujitsu...
  • Page 33: Can The Stylus Tip Be Replaced

    You device has one eyelet on the left side and one eyelet on the right side for securing the stylus tether (see "Ports and controls", Page 9). The tether eyelet on the right side is shown below. ► Fasten the stylus tether to the stylus eyelet and to the eyelet on the Tablet PC. Fujitsu...
  • Page 34: Tablet Buttons

    Your Tablet PC is fitted with three tablet buttons. Symbol Description Functions Volume + button Increase volume – Volume - button Decrease the volume – – – Shortcut button Call the status area by pressing or start a screenshot function by a long press (depends on configuration) Fujitsu...
  • Page 35: Webcam

    Tablet PC will switch off automatically. Monitoring the battery state of charge A battery symbol for monitoring the battery capacity is displayed in the system bar / status indicator. The battery symbol shows you the battery charge. Fujitsu...
  • Page 36: Using The Energy Saving Functions

    If you do not intend to use your Tablet PC for a long period of time: ► Exit the energy saving mode if necessary via touching the screen or by switching on the Tablet PC. ► Close all opened programs and completely shut down the Tablet PC. Fujitsu...
  • Page 37: Memory Cards

    ► Carefully push the memory card into the slot (a) in the direction of the arrow (2) until you feel the memory card engage. The label area must be facing downward. Do not apply any force, otherwise the delicate contact surfaces could be damaged. ► Close the slot cover. Fujitsu...
  • Page 38: Removing The Memory Card

    ► Press the edge of the memory card so that the memory card jumps slightly out of the slot (1). ► Pull the memory card out of the slot (a) in the direction of the arrow (2). ► Close the slot cover (3). Fujitsu...
  • Page 39 Working with the Tablet PC This page intentionally left blank Fujitsu...
  • Page 40: Wireless Lan/Bluetooth Radio Components

    Working with the Tablet PC Wireless LAN/Bluetooth radio components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system.
  • Page 41: Ethernet And Lan (Only With Multifunctional Cradle)

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Whether your device has this function depends on the chosen equipment level. Fujitsu...
  • Page 42: Accessories For Your Tablet Pc (Optional)

    Multifunctional cradle for charging the Tablet PC and with additional ports • Slice keyboard • VESA mounting attachment • Shoulder strap • Folio case • Micro USB adapter (cables) The following sections provide more information on handling the accessories. Fujitsu...
  • Page 43: Your Performance Docking Cradle (Optional)

    Tablet PC 9 = Display Port = USB port 2.0 10 = LAN port = USB port 2.0 11 = Security Lock device 12 = USB port 2.0 = DC jack socket (DC IN) = Headphone port Fujitsu...
  • Page 44: Setting Up The Cradle

    Place the cradle on a flat, stable, non-slippery surface. • Never place the cradle or the AC adapter on a heat-sensitive surface. • Do not expose the cradle to extreme environmental conditions. Protect the cradle from dust, moisture and heat. Fujitsu...
  • Page 45: Connecting The Tablet Pc To The Cradle

    ► Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2). ► Connect the AC cable to the AC adapter (3). ► Plug the AC cable into the power outlet (4). Fujitsu...
  • Page 46: Disconnecting The Tablet Pc From The Cradle

    ► Switch the Tablet PC off. ► Keep the slide-out button pressed (1). ► While holding down the lower part of the cradle, lift the Tablet PC off the cradle in the direction of the arrow (2). Fujitsu...
  • Page 47: Slice Keyboard (Optional)

    The slice keyboard is an optimized device for the convenient input of text. It only needs to be docked with the Tablet PC. Components of the keyboard cover 3 = Status indicators (Num Lock, Caps 1 = Release button Lock, Scroll Lock) 2 = Docking port for the Tablet PC Fujitsu...
  • Page 48: Connecting The Tablet Pc To The Slice Keyboard

    ► Press the slide-out button (1) until it remains in the pressed position (red marking visible). ► Push the Tablet PC onto the keyboard cover in the direction of the arrow until you feel it engage in the connector (2). Fujitsu...
  • Page 49: Separating The Tablet Pc From The Slice Keyboard

    Accessories for your Tablet PC (optional) Separating the Tablet PC from the slice keyboard ► Keep the unlocking button pressed (1). ► Lift the Tablet PC away from the slice keyboard in the direction of the arrow (2). Fujitsu...
  • Page 50: Vesa Mount (Optional)

    ► Position the VESA mount on the Tablet PC (2). Make sure that the screw holes of the VESA mount and of the Tablet PC lie exactly on top of each other. ► Secure the VESA mount using the screws (3). Fujitsu...
  • Page 51: Hand Strap (Optional)

    ► Position the hand strap on the Tablet PC (1). Make sure that the screw holes of the hand strap and of the Tablet PC lie exactly on top of each other. ► Secure the hand strap with the screws (2). Fujitsu...
  • Page 52: Shoulder Strap (Optional)

    To prevent damaging the screws, do not use a motorized screwdriver. ► Remove the screws (1). ► Position the fittings (2). ► Secure the fittings using the screws (3). ► Secure the shoulder strap to the fittings. Folio case (optional) unfinished..Graphics still show predecessor K399 Fujitsu...
  • Page 53 Do not put the folio case in direct sunlight or expose it to high temperature or humidity. ► Position the Tablet PC on the folio case as shown. ► Engage the top edge and then press it down. The following illustration shows you the many ways in which the folio case can be used: Fujitsu...
  • Page 54: Micro Usb Adapters

    Accessories for your Tablet PC (optional) Micro USB adapters unclear whether or not this is applies to this device 5 USB adapters are available for the device: Micro USB to USB adapter Micro USB to HDMI adapter Micro USB to VGA adapter Fujitsu...
  • Page 55 Accessories for your Tablet PC (optional) Micro USB to Display Port adapter Micro USB to LAN adapter For technical specifications, see chapter"Micro USB adapters (optional)", Page Fujitsu...
  • Page 56: Security Functions

    The fingerprint sensor can record the image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► Install the fingerprint software to be able to use the fingerprint sensor (1). Fujitsu...
  • Page 57: Using The Security Lock

    Utility, while the user password will only give you access to some of the functions. You can only set up a user password if a supervisor password has already been assigned. Calling and using the BIOS Setup Utility is described in the chapter "Settings in BIOS Setup Utility", Page Fujitsu...
  • Page 58: Password Protection For Booting The Operating System

    Removing the supervisor password simultaneously deactivates the user password. Password protection for booting the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Assigning the supervisor and user passwords", Page 56), you can also prevent booting of the operating system. Fujitsu...
  • Page 59: Password Protection For The Hard Disk

    ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The Tablet PC reboots and your hard disk is now protected with a password. The password prompt is enabled as soon as the Tablet PC has rebooted. Fujitsu...
  • Page 60 ► If you wish to remove a password for a second hard disk (Drive1), in the area Drive1 mark the field Set Master Password and proceed in exactly the same way as for the removal of the first hard disk (Drive0). Fujitsu...
  • Page 61: Smart Card Reader (Device Dependent)

    SmartCard with you. In order to be able to take advantage of all the security features of your Tablet PC, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, so maximum protection is maintained even when the SmartCard is lost.
  • Page 62: Trusted Platform Module - Tpm (Device Dependent)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select the entry Disabled to disable the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The Tablet PC is rebooted and the TPM is disabled. Fujitsu...
  • Page 63: Connecting External Devices

    Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can find the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. Fujitsu...
  • Page 64: Display Port (Performance Docking Cradle Only)

    You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touchscreen", Page You can display the same image on the external monitor and on the LCD screen of the Tablet PC at the same time. Fujitsu...
  • Page 65: Connecting Usb Devices

    ► Tap the symbol for safe removal of the hardware. ► Select the device you wish to shut down and remove. ► Tap OK. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu...
  • Page 66: Connecting External Audio Devices

    MiniDisc player, MP3 player, CD player or a tape deck to your Tablet PC. ► Connect the audio cable to the external device. ► Connect the audio cable to the microphone port of the performance docking cradle. Fujitsu...
  • Page 67: Settings In Bios Setup Utility

    ► Keep the "Lock screen orientation" tablet button pressed and switch the Tablet PC on. ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...
  • Page 68: Bios Setup Utility Operation

    ► Select the option you want to change with the cursor keys ↓ ↑ ► Press the "Enter" key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...
  • Page 69: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...
  • Page 70: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"...
  • Page 71: Executing A Reset

    ► Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. ► For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system.
  • Page 72: Battery Indicator Does Not Illuminate

    "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PC’s touchscreen is difficult to read. Cause Troubleshooting ► Move the Tablet PC into a different position. Reflected glare ► Increase the brightness of the screen. Fujitsu...
  • Page 73: The External Monitor Remains Blank

    The cursor does not correctly follow the stylus movements Troubleshooting Cause ► Calibrate the stylus as described in chapters Stylus incorrectly calibrated. "Adjusting the stylus", Page 30 "Calibrating the stylus", Page Fujitsu...
  • Page 74: Stylus Input Not Working

    ► Check that the data cable between the Tablet The printer driver is faulty or not correctly installed, or it is the wrong printer driver. PC and the printer is properly connected. ► Check whether the correct printer driver is loaded (refer to the printer documentation). Fujitsu...
  • Page 75: The Wireless Connection To A Network Does Not Work

    Your Smart Card must comply with the ISO standard 7816-1, -2, -3 and -4. SmartCard PIN forgotten Troubleshooting Cause ► If you work in a network, contact your PIN forgotten system administrator, who can unlock your Tablet PC using a supervisor PIN. Fujitsu...
  • Page 76: User And/Or Supervisor Smart Card Lost

    ► If you work in a network, contact your SmartCard lost. system administrator, who can boot your Tablet PC with a supervisor SmartCard. Acoustic warning Cause Troubleshooting ► Charge the battery. A beep sounds every few seconds. The battery is almost dead. Fujitsu...
  • Page 77: Error Messages On The Screen

    ► Make sure that the operating system is installed on the corresponding drive. ► Press the tablet button to boot the Press <F1> to resume, <F2> to SETUP operating system This error message appears if an error occurs during the self-test before starting the operating system. Fujitsu...
  • Page 78 System battery is dead - Replace and run SETUP service center. ► Contact your sales outlet or our customer System cache error - Cache disabled service center. ► Contact your sales outlet or our customer System timer error service center. Fujitsu...
  • Page 79: Technical Data

    Weight depending on configuration from 1.31 lbs. (640 g) Input devices Tablet buttons 3 keys Stylus Active stylus with a pressure button Slots Storage card slot 1 x micro SD Card Ports Headphones port 3.5 mm stereo mini jack Docking port Fujitsu...
  • Page 80 Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 5 °C ..35 °C / 41 °F ..95 °F Transport temperature (2K2) –15 °C ..60 °C / 5 °F ..140 °F Fujitsu...
  • Page 81: Wlan Specifications

    *** Network key encryption (WEP) occurs with the number of bits given above, after deduction of the fixed length of 24 bits the user may however also set 40 or 104 bits. **** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. Fujitsu...
  • Page 82: Rechargeable Battery

    Technical data Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/". 3-cell lithium polymer battery 9900 mAh Rated voltage 3.8 V Rated capacity 38 Wh AC adapter (36 W) Rated voltage 12 V Max. rated current An additional AC adapter or AC cable can be ordered at any time.
  • Page 83: Slice Keyboard (Optional)

    0.51 in. Weight Approx. 24 g / 0.053 lbs. Shoulder strap (optional) Dimensions Width x Depth x Height 49.80 in. x 0.98 in. x 0.189 in. (1265 mm x 25 mm x 4.8 mm) Weight Approx. 0.074 lbs. (33.4 g) Fujitsu...
  • Page 84: Folio Case (Optional)

    6 inches Micro USB to HDMI adapter 6 inches 1920 x 1080 Micro USB to VGA adapter 6 inches 1920 x 1080 6 inches 1920 x 1080 Micro USB to Display Port adapter Micro USB to LAN adapter 6 inches Fujitsu...
  • Page 85: Manufacturer's Notes

    Remember – protecting the environment is a cooperative effort, and we must make every effort to protect it for current and future generations. * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site "www.shopfujitsu.com"...
  • Page 86: Ul Notice

    For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instruction. Fujitsu...
  • Page 87: Energy Star Compliance

    To “wake” the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benefits: Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment.
  • Page 88: Regulatory Notes And Statements

    RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvan t causer un mauvais fonctionnement de l’appareil. Fujitsu...
  • Page 89 RSS 102 d’Industrie Canada. Cet appareil a été testé selon les directives de la FCC et d’IC concernant l’exposition aux radiofréquences et s’est révélé conforme à ces dernières lorsqu’il a été testé en contact direct avec le corps. Fujitsu...
  • Page 90 Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America, Inc. may invalidate the user’s right to operate this equipment.
  • Page 91: Appendix

    That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu...
  • Page 92 Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases). Fujitsu...
  • Page 93 Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device. Fujitsu...
  • Page 94: Deactivating/Disconnecting The Wlan Device

    2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. Troubleshooting the WLAN Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Fujitsu...
  • Page 95 Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Fujitsu...
  • Page 96 LAN device to associate but not authenticate to the wireless network. Incorrect IP address This only applies to networks configuration using static IP addresses. Please contact your network administrator for the correct settings. Fujitsu...
  • Page 97: Using The Bluetooth Device

    FCC and Industry Canada and the warranty. Image Backup and Recovery Procedures Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you the best computing experience with your new system. It is very important that you create DVD copies of your Recovery Image and Bootable Disk before beginning to use your system.
  • Page 98: Creating A Backup Of Bootable Disk And Recovery Image

    Fujitsu Software Auto Installer. To make a copy of the recovery image to DVD disks, you will need three or four blank disks to create the copy.
  • Page 99: Recover Your System When The Hard Drive Is Still Accessible

    Appendix Creating a Backup of Essential Access Software When you purchased your new system, a “Fujitsu Software Extractor” shortcut was loaded to “C:\Fujitsu\Drivers\AutoInstaller\”. This shortcut allows you to save the software driver packages along with the extracted Auto Installer software package to a selected location. It is recommended that you save these packages to writable media or an external drive.
  • Page 100 To verify/change the boot-up priority (rather than booting-up from the hard drive or an external media drive), perform the following steps: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disk into the drive tray.
  • Page 101: Restore The Recovery Image From Hidden Partition

    1. Press the Diagnostics Tool button to start the Diagnostics tool. 2. Read the note, and then click OK. 3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disk, Keyboard, and Mouse.
  • Page 102: Recover Your System When The Hard Drive Is Not Bootable

    3. On the Recovery Tool - Partition Creation screen, move the slider to set disk size, and then click OK. 4. Click Yes in the Partition Creation confirmation dialog. WARNING: It is highly recommended that you send your product to Fujitsu Service to replace a hard drive. A mistake could possibly destroy your computer, your new hard drive or both.
  • Page 103: Recovering Your Recovery Image Using Recovery And Utility (For New Hard Drive Or Non-Bootable Hard Drive)

    Note: You will need the Bootable disk and Recovery Image disk set for this recovery. Enter key. 1. Power on your system. When the Fujitsu logo appears on the screen, press the 2. Insert the bootable disk in your DVD drive, then click OK. Enter 3.
  • Page 104: Installing The Software After The Recovery Image Is Restored

    The below listed steps are applicable only in cases in which the recovery image restore and hidden partition contents have not been wiped out. 1. After the recovery image is restored, launch the desktop icon “Fujitsu Software Auto Installer”. 2. Double-click on “Fujitsu Software Auto Installer” desktop icon.
  • Page 105 A message will be displayed during this time stating, “Please wait while the content is being processed”. 4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 5. The Fujitsu Software Auto Installer user interface will be launched providing ability to auto install the essential access software on the system.
  • Page 106 Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download a list of the most current drivers, utilities, and applications to determine whether you have the latest versions.
  • Page 107: Index

    Connecting a Tablet PC 43 Crystal View screen cleaning 14 Keyboard cleaning 14 dark touchscreen 70 Date not correct 69 Landscape format Declarations of conformity 85 display 23 Display orientation select 23 Display Port 62 Making ready to use 16 Fujitsu...
  • Page 108 Power-on Power-on indicator 20 AC adapter 80 The wireless connection to a network Printer does not print 72 Problem solving 68 does not work 73 Time not correct 69 Tips 68 Touchpad Rechargeable battery cleaning 14 see battery 33 Fujitsu...
  • Page 109 TPM 60 Transport Damage during transportation 15 Webcam 33 Transportation 12 Winter time 69 Troubleshooting 68 Wireless components Trusted Platform Module 60 Safety notes 12 Wireless LAN Safety notes 12 Wrong date/time 69 USB ports 63 User password change 56 Fujitsu...

Table of Contents