Table of Contents
Advertisement
Section 3 - Configuration
Select either 2.4GHz or 5GHz from the drop-down
Wireless Band:
menu.
WDS is selected from the drop-down menu.
Mode:
Service Set Identifier (SSID) is the name designated
Network Name (SSID):
for a specific wireless local area network (WLAN). The
SSID's factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enable or Disable SSID visibility. Enabling this
SSID Visibility:
feature broadcasts the SSID across the network, thus
making it visible to all network users.
Enabling this feature automatically selects
Auto Channel Selection:
the channel that will provide the best wireless
performance. This feature is not supported in WDS
mode.
All devices on the network must share the same
Channel:
channel. To change the channel, use the drop-down
menu to make the desired selection.
Allows you to select the channel width you would
Channel Width:
like to operate in 2.4GHz and 5GHz. Use the drop-
down menu to choose 20 MHz or Auto 20/40 MHz
or Auto 20/40/80 MHz.
Enter the MAC addresses of the APs on your network
AP MAC Address:
that will serve as bridges to wirelessly connect
multiple networks.
D-Link DAP-X2850 User Manual
WDS Mode
15
- Quick Links:
- Configure the Access Point
Hide quick links:
Advertisement
Table of Contents
