hit counter script
Download
Share
Print this page
Kenwood NX-5600HB Service Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Transceiver
  5. NX-5600HB
  6. Service manual

Kenwood NX-5600HB Service Manual

Hide thumbs

Advertisement

Quick Links

B5B-7318-00
RA075<Rev.001>
6 S ERVICE MANUAL
2019
COPYRIGHT © 2019 JVC KENWOOD Corporation
1
PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
2
SPECIFIC SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
3
DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34
4
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-37
5
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-57
This product complies with the RoHS directive for the European market.
B5B-7318-00
SERVICE MANUAL
VHF DIGITAL TRANSCEIVER
NX-5600HB
COPYRIGHT © 2019 JVCKENWOOD Corporation

TABLE OF CONTENTS

This product uses Lead Free solder.
No.RA075<Rev.001>
2019/6

Advertisement

loading

Related Manuals for Kenwood NX-5600HB

Summary of Contents for Kenwood NX-5600HB

  • Page 1: Table Of Contents

    B5B-7318-00 NX-5600HB COPYRIGHT © 2019 JVC KENWOOD Corporation TABLE OF CONTENTS PRECAUTION............... . . 1-4 SPECIFIC SERVICE INSTRUCTIONS .
  • Page 2 Neither is any liability assumed for damages resulting from the use of the information contained herein. JVC KENWOOD Corporation reserves the right to make changes to any products herein at any time for improvement purposes. Firmware Copyrights The title to and ownership of copyrights for firmware embedded in KENWOOD product memories are reserved for JVC KENWOOD Corporation.
  • Page 3 Analog 16K0F3E Digital 8K30F1E, 8K30F1D, 8K30F7W Analog measurements made per TIA 603, and NXDN digital measurements made per NXDN Conformance Test. Specifications shown are typical. JVC KENWOOD Corporation reserves the right to change specifications without prior notice or obligation. (No.RA075<Rev.001>)1-3...

  • Page 4: Precaution

    110W NX-5600HB is complete by combining options with only the transceiver body (without panel). RF Deck (NX-5600HB) is possible to combine and install the Remote Kit (KRK-14H), Control Head (KCH-19, KCH-20R, KCH-21R) and Cable (KCT-71, KCT-72) respectively. Are you using the Multi-RF Deck/Multi-Control...
  • Page 5 REALIGNMENT Mode Operation 2.2.1 Modes Firmware programming • [AUX (Orange)] + Power ON mode*2 • [ ] + Power ON User mode Select the “Firmware Prog” using the [] / [] key. Panel tuning mode Panel test mode Press the [ ] key.
  • Page 6 2.2.6.3 Programming Note: (1) Start up the firmware programming software (KENWOOD The data stored in the PC must match the “Model Name” Firmware Loader). The KFL.exe exists in the KPG-D1/D1N when it is written into the flash memory. installed folder.
  • Page 7 • Tuning data • Embedded message with password • ESN (Electronic Serial Number) data Key guide on the Clone/ Front Panel Programming Password input screen. NX-5600HB with • Confirm ([ ] key): The password confirmation KCH-20R • Delete ([ ] key): Delete the latest digit from the current...
  • Page 8 The setup items for Front panel programming mode Setup item Display Remarks 1 RX Frequency RX Frequency Receive Frequency 2 TX Frequency TX Frequency Transmit Frequency 3 Channel Type Channel Type NXDN: Analog/NXDN/Mixed 4 Transmit Mode Transmit Mode NXDN: Analog/NXDN 5 RX Signaling RX QT/DQT Receive QT/DQT...
  • Page 9  Key operation (2/3) TX Signaling RX RAN TX RAN Transmit \Item Power Decision Decision Decision Decision Back to the previous item Back to the previous item Back to the previous item Back to the previous item Unused Unused Unused Unused Exit panel program mode Exit panel program mode...
  • Page 10 • Front panel programming mode flow chart Input Password Enter the Front panel programming mode by using section "2.2.2 How to Enter Each Mode". Clone/Front Panel Password Front panel Programming mode ] or [ Zone Select Keep This Change? Channel Select Channel Name ] or [ ] or [...
  • Page 11 INSTALLATION External View 2-M x0.7 DEPTH OF DC CONNECTOR EFFECTIVE ANTENNA WITH CABLE THREAD:10 CONNECTOR (M TYPE) 3-M x0.7 DEPTH OF 3-M x0.7 EFFECTIVE DEPTH OF THREAD:8 EFFECTIVE THREAD:8 CAUTION LABEL (HOT SURFACE) KCT-71 CONNECTION CAUTION LABEL MODEL NAME PLATE (FCC) D-SUB CONNECTOR (25P) ACC.CONNECTOR...
  • Page 12 For the multi RF Deck system, refer to the KRK-14H/KRK-15B service manual (B5B-7173-20). Because the NX-5600HB has the function of the KRK-15B, it can be connected directly to the REMOTE CONTROL HEAD. The KRK-14H interface kit is required to connect the KCH-19 and radio. Refer to the KRK-14H/KRK-15B service manual (B5B- 7173-20).
  • Page 13 2.3.1.1 Connecting procedure of the REMOTE CONTROL (3) Form the cable of the KCT-71 so as not to protrude from CABLE for Single Head system the groove of the chassis as shown below. (The procedure for connecting the KCT-71 to the radio and the procedure for connecting the KCT-77 to the radio are the same.) (1) Insert the connector of the KCT-71 into the connector of the radio.
  • Page 14 2.3.1.2 Connecting procedure of the REMOTE CONTROL (4) Insert each of the 2 connectors of the KCT-71 made in step CABLE for Dual Head system (3) into the connectors of the radio. (The procedure for connecting the KCT-71 to the radio and the procedure for connecting the KCT-77 to the radio are the same.) (1) Cut the waterproof packing of the KCT-71 along the dotted line with a cutting tool so as to make the hole for the...
  • Page 15 (1) Insert the KCT-18 lead terminal into pin 1 (IGN) of the (4) Insert the KCT-18 lead terminal into pin 1 (IGN) of the Socket (9-pin) NX-5600HB accessory. socket (12-pin) KCT-72 accessory. (2) Connect the socket (9-pin) to the connector (9-pin) for Socket (12-pin) KCT-72 accessory accessory on the front of the radio.
  • Page 16 (1) The external speaker output from the connector (9-pin) for and 8. accessory on the front of the NX-5600HB is 12 W / 4 ohm. (1) Connect the lead wire of the KES-5/5A to the Socket (9- (2) The KCH-20R Remote Control Head does not have a built- pin) NX-5600HB accessory.
  • Page 17 (G1D-0006-XX) (G1D-0055-XX) (F3K-0004-XX) Note: Supplied accessories with * mark are not used for the NX-5600HB. 2.3.5.2 INSTALLING THE MODULE IN THE TRANSCEIVER (1) Remove the M.CABINET and RUBBER SEAL of the (4) Insert the connector of the module into the CN5 of the Main transceiver.
  • Page 18 (6) Reinstall the M.CABINET and RUBBER SEAL of the 2.3.6.2 Change configuration of D-SUB 25-pin connector transceiver. from DI to RTS Note: 5 pin • When the KWD-AE30/ KWD-AE31 is installed, select The input (5 pin) of D-SUB 25-pin connector is configured at the “Secure Cryptographic Module”...
  • Page 19 2.4.1 Overview The NX-5600HB is a Low Band Analog FM & Digital Mobile transceiver designed to operate in the frequency range of 39 to 50MHz. The unit consists of a receiver, a transmitter, a phase-locked loop (PLL) frequency synthesizer, a digital control unit, and a power supply circuit.
  • Page 20 2.4.4 Transmitter System 2.4.4.1 Audio Band Circuit Refer to the “LEVEL DIAGRAM” in this manual. The signal from microphone is amplified and converted to digital signal by CODEC (IC902). IC902 includes AGC function. Digital signal is transferred to MPU/DSP (IC706) through SSI. 2.4.4.2 Baseband Circuit Refer to the "LEVEL DIAGRAM"...
  • Page 21 2.4.5 PLL Frequency Synthesizer 2.4.5.1 TCXO (X700) TCXO (X700) generates a reference frequency of 19.2MHz for the PLL frequency synthesizer. This reference signal is buffered by Q700 and IC703. And it is distributed to PLL (IC100), IF IC (IC600), and MPU/DSP (IC706). The frequency adjustment is achieved by adjusting a D/A converter (IC715) output in the voltage of the control terminal of TCXO.
  • Page 22 2.4.6.3 Interface Circuit The Interface unit is connected by a flexible cable (CN7 of the Main unit, CN1 of the Interface unit). Up to 2 control heads can be connected to the Interface unit. The control head is used for control and display of the radio equipment. 2.4.6.4 The DSP circuit consists of a MPU/DSP (IC706) and processes the base band signal.
  • Page 23 RF Power Amplifier Drive Amplifier 31BU Q8, Q9, D11 50BU Power management IC 5V Reg 3.1V AVR 12BU MPU/DSP RTC 1.2V AVR SCTAM1 Q1, Q3 Option Board DC SW /TAM_CNT MPU/DSP Core IC24 5.4V DC/DC MPU/DSP PLL 1.2V DC/DC BAT_CNT from Power management IC IC11...
  • Page 24 2.4.9 Bluetooth/GPS Circuit The main component of the Bluetooth/GPS circuit is Bluetooth / GPS IC (IC5) on Module (BT/GPS) unit. The clocks of Bluetooth/GPS IC require 19.2MHz for core and 32.768kHz slow clock (X1 and X2) for UART. Bluetooth/GPS IC communicates to the MPU/DSP (IC706) on the HCI UART. Interface of UART & Digital audio (PCM) between the MPU/DSP (IC706) and the Bluetooth/GPS IC (IC5), have level conversion at the level shift IC (IC6 and IC7) on Module (BT/GPS) unit.
  • Page 25 COMPONENTS DESCRIPTION REF. PART NAME USE / FUNCTION 2.5.1 Main Unit (XC1-286F-00) IC701 FLASH MEMORY REF. PART NAME USE / FUNCTION IC702 MOBILE DDR VOLTAGE REGULATOR (31BU) IC703 CLOCK BUFFER [CLK BUFF] [3.1V AVR] IC704, LOGIC CONTROL [LOGIC CTL] POWER MANAGEMENT VOLTAGE REGULATOR (12BU) IC706 MPU / DSP...
  • Page 26 REF. PART NAME USE / FUNCTION REF. PART NAME USE / FUNCTION TRANSISTOR DC SWITCH [DC SW] Q912 TRANSISTOR DC SWITCH [DC SW] TRANSISTOR DC SWITCH [DC SW] Q913 DC SWITCH (HR) [DC SW] TX/RX SWITCH [TX-RX SW] Q914 TRANSISTOR DC SWITCH [DC SW] Q100 TRANSISTOR DC SWITCH (FIN FILTER/LO FILTER) Q915...
  • Page 27 2.5.2 Module (BT/GPS) Unit (XC2-0031-80) REF. PART NAME USE / FUNCTION REF. PART USE / FUNCTION NAME D505- VARIABLE RX BAND-PASS FILTER TUNE CAPACITANCE [RX BPF TUN] LEVEL CONVERTER [LEVEL CONV] DIODE VOLTAGE REGULATOR (18BT) [1.8V AVR] D509- VARIABLE RX BAND-PASS FILTER TUNE VOLTAGE REGULATOR (33BT) [3.3V AVR] CAPACITANCE [RX BPF TUN]...
  • Page 28 TERMINAL FUNCTION Pin No. Name Function 2.6.1 Main unit (XC1-286F-00) - No connection Pin No. Name Function - No connection CN5 (for production) - No connection 1~20 - - No connection CN6 (to Module (BT/GPS) unit CN1) - No connection GPS_PWR I Antenna power supply detection - No connection...
  • Page 29 Pin No. Name Function Pin No. Name Function AUXIO5 I/O AUX input/output 5 25pin ACCESSORY CONNECTOR - Ground - Refer to “D-sub 25pin connector specification”. AUXIO4 I/O AUX input/output 4 RXD0 AUXIO8 I/O AUX input/output 8 TXD0 AUXIO3 I/O AUX input/output 3 AUXIO9 TXD2/AUXIO9 O Serial data output 2...
  • Page 30 Pin No. Name Function Pin No. Name Function CTS2 O Serial data output - No connection RTS2 I Serial data input - No connection BT_AUD_DO I Audio signal input - No connection BT_AUD_DI O Audio signal output - No connection BCLK I Audio serial data bus bit clock - No connection...
  • Page 31 2.6.4 D-Sub 25pin connector specification Pin Name Signal Type Rating and Condition Parameter Unit RXD0 Digital Input Voltage Range Threshold Low Threshold High 1.60 2.45 Baud Rate 300k TXD0 O Digital Voltage Swing (3kohm Load) ±5 ±5.2 Baud Rate 300k AUXIO9 I/O Digital -0.5...
  • Page 32 Pin Name Signal Type Rating and Condition Parameter Unit AUXO1 O Digital The type of this port is open collector. -500 O Analog Output Level Vp-p Coupling Capacitor Allowable Load kohm Allowable Frequency 3000 O Analog Output Level 0.28 Vp-p Coupling Capacitor Allowable Load kohm...
  • Page 33 2.6.5 Molex 9pin connector specification Pin Name Signal Type Rating and Condition Parameter Unit Analog Voltage Range O Analog Audio Output (3% Distortion) Allowable Frequency 3000 Analog Input Voltage 16.0 Input Current O Analog Output Voltage This parameter depends on HR1 Voltage. Output Voltage Loss Input Current O Analog...

  • Page 34: Disassembly

    SECTION 3 DISASSEMBLY Precautions for Disassembly 3.1.2 Removing the Main unit (1) Disconnect the connectors of the Main unit. Note 2 3.1.1 Removing the M.CABINET, RUBBER SEAL and (2) Remove the solder fixing the antenna. SHIELDING COVER (3) Remove the FLAT SPRING. (1) Remove 6 screws fixing the M.CABINET(bottom).<1>...
  • Page 35 (6) The Main unit and the Interface unit are connected by FFC. Precautions for Reassembly When removing the Main unit, be careful not to apply 3.2.1 Wire forming excessive force to the FFC and the connectors. Refer to the following pictures. Main unit Interface unit Avoid the capacitor...
  • Page 36 3.2.2 Attaching the RUBBER SEAL on the Chassis Note: There is a groove on the outer circumference of the RUBBER Make sure to press the outer circumference along the dotted SEAL. line of the RUBBER SEAL to confirm that the groove and the When attaching the RUBBER SEAL, fit the groove of the rib of the chassis are fitted.

  • Page 37: Adjustment

    SECTION 4 ADJUSTMENT Controls 4.2.2 Key operation Function OFF: "Func" not appears on the sub LCD display Power switch Auxiliary (orange) key Function Display Volume UP/Down key Channel UP/Down key Push: Volume up Hold: Volume up continuously Push: Volume down Hold: Volume down continuously []...
  • Page 38 Function Display High power/Medium High: "H" power/Low power Medium: "M" Low: "L" Function off Compander on/off icon appears External Speaker on/off icon appears [AUX Function off (Orange)] [PTT] Transmit [0] to [9] Function off [#], [ ] LED indicator Red LED lights during transmission. Green LED lights when there is carrier.
  • Page 39 NXDN Mode signaling Function Push Hold (1 second) RAN1 RAN1 [AUX Output tone pattern (Orange)] change of balance None adjustment (A change is RAN1 Maximum Deviation possible only during Pattern balance adjustment.) FSW + PN9 FSW + PN9 [PTT] Transmit Tone Pattern (1031Hz) Tone Pattern (1031Hz) (MIC) [0] to [9]...
  • Page 40 13 reference level adjustment Adjustment Item Description Receive Assist, Transmit Assist Balance The transmit modulation frequency Tuning point Display RX (MHz) TX (MHz) response is adjusted. This item is adjusted so that the deviation Low 1 39.050000 39.100000 of 2kHz becomes the same deviation of Low 2 39.500000 39.600000...
  • Page 41 4.3.5 Adjustment item and Display Order Adjustment Main LCD Sub LCD Adjust item item display display (Analog Wide) (Analog (NXDN Number Narrow) Narrow) Adjustment range Receive Assist RAST (CV voltage) 13 point ADJ Common Section 2 4096 Transmit Assist TAST (CV voltage) 13 point ADJ Common...
  • Page 42 Order Adjustment Main LCD Sub LCD Adjust item item display display (Analog Wide) (Analog (NXDN Number Narrow) Narrow) Adjustment range Sensitivity 4 SENS4 (RSSI measurement value) Receiver Section 4 1~256 RSSI Reference RRSSI (RSSI measurement value) Receiver Section 6 1~256 Open Squelch (ASQDET measurement value) 5 Receiver...
  • Page 43 4.3.6 Panel tuning mode flow chart Note: * In this Panel tuning mode flow chart, the Adjustment item name is modified. Panel Test Mode Upper: Adjustment Point Upper: Adjustment Item Lower: Displayed character Lower: Displayed character ]hold For all adjustment items, press the [ ] key RX Assist 13 reference level...
  • Page 44 BER (Bit Error Rate) Measurement (For example, if the BER is 0.86%, the display shows (1) The Panel Test Mode is used to measure the BER (Refer "0.86".) "4.2.1 Test mode operation features"). (2) Select "7" (NXDN Mode) for test signaling (Refer to "4.2.3 Frequency and Signaling"...
  • Page 45 Test cable for microphone input (E30-3360-28) MIC connector (Front panel view) GREEN 1 : BLC 2 : +B 3 : GND BLACK 4 : PTT/TXD (PC serial data from radio) 5 : MICE BLUE 6 : MIC SHIELD MIC-E 7 : HOOK/RXD (PC serial data to radio) WHITE 8 : DM GRAY...
  • Page 46 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC test mode Unit Parts Method <Panel>: Panel test mode 3. Medium <PC> Power meter Check 65~75W power check 1) Test Channel: 1 Ammeter 16A or less Test Signaling Mode: Analog Signaling: 1 2) Press [Transmit] key.
  • Page 47 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC test mode Unit Parts Method <Panel>: Panel test mode 5. Sensitivity <PC> Check 12dB SINAD or check 1) Test Channel: 1 AF VM more Test Signaling Mode: Analog Oscilloscope Signaling: 1 Distortion 2) SSG output: -117dBm (0.32μV) meter Wide: MOD: 1kHz/±3.0kHz...
  • Page 48 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 3. Transmit <PC> [←], [→] <PC> 2.5V±0.1V Assist 1) Adj item: [Transmit Assist] [Automatic Adjustment] 2) Adj points: 13 points 1) Press [Tune Assist Voltage] [Low1], [Low2], [Low3], [Low4], key.
  • Page 49 Transmitter Section Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 1. High <PC> Power meter [←], [→] 125W ±10W Maximum 1) Adj item: [High Maximum Power] Ammeter 25A or less Power 2) Adj points: 6 points Press [Apply All] key for <PC>...
  • Page 50 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 6. Low <PC> Power meter [←], [→] ±1W Transmit 1) Adj item: [Low Transmit Power] Ammeter 11A or less Power 2) Adj points: 6 points Press [Apply All] key for <PC>...
  • Page 51 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 10. Maximum <PC> Deviation [←], [→] Set a fixed value "500" for each 4150~4250Hz Deviation 1) Adj item: [Maximum Deviation meter adjustment point. Transmit at [Analog Wide] (Analog Wide)] Oscilloscope...
  • Page 52 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 13. DQT <PC> Deviation [←], [→] Set a fixed value "425" for each 0.75kHz Deviation 1) Adj item: [DQT Deviation (Analog meter adjustment point. ±0.05kHz [Analog Wide] Wide)]...
  • Page 53 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 16. MSK <PC> Deviation [←], [→] Set a fixed value "505" for each 3.00kHz Deviation 1) Adj item: [MSK Deviation (Analog meter adjustment point. ±0.05kHz [Analog Wide] Wide)]...
  • Page 54 4.10 Receiver Section Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 1. AF level <PC test mode> Volume Turn the Volume knob to obtain 1.41V±0.1V setting 1) Test Channel: 1 AF VM [←], [→] 1.41V AF output.
  • Page 55 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 5. Sensitivity 1 <PC> [←], [→] <PC> 1) Adj item: [Sensitivity 1] Distortion [Automatic Adjustment] 2) SSG output: -100dBm (2.24μV) meter 1) Press the "Start" key in the Auto (MOD: 1kHz/±1.5kHz) Oscilloscope Tuning, and the RSSI value is...
  • Page 56 Item Condition Measurement Adjustment Specifications /Remarks <PC>: PC tuning mode Unit Parts Method <Panel>: Panel tuning mode 8. Low RSSI <PC> After input signal from SSG; 1) Adj item: [Low RSSI (Analog Distortion Narrow)] meter Press [Apply] key for <PC> to store 2) SSG output: -118dBm (0.28μV) Oscilloscope the adjustment value at each...

  • Page 57: Troubleshooting

    SECTION 5 TROUBLESHOOTING Fault Diagnosis of the BGA (Ball Grid Array) IC Overview A flowchart for determining whether or not the transceiver can be powered on (the LCD does not function even if the power switch is turned on) due to broken BGA parts. BGA parts MPU/DSP (IC706), mobile DDR (IC702), Flash memory (IC701) When the BGA IC is problematic, please bring the printed circuit board (XCA-074F-00) in for service.
  • Page 58 Checking the output signal Pass from the MPU/DSP Checking the control signal output from If the /FRST is always 0V, the MPU/DSP the MPU/DSP is broken. Remove D701 to check the voltage of Fail Normal voltage Points to be checked Flash memory side R732.
  • Page 59 *1 If 12M,18M or 33M has still abnormal voltage after the implementation of each procedure above, 54M(IC8),12M(IC24),18M(IC11), 33M(IC5) or one of these peripheral circuit is broken. 54M (normally 5.4V at L12) has an abnormal voltage, check the MSP430G25XXXX (IC2) according to the following procedure. Checking the operation of the IC2 When VIN of 54M Check that the voltage of VN of 54M...
  • Page 60 Checking the operation of IC2 (/PSW and /IGN) Check that the signal /PSW (IC2-10pin) and /PSW_OUT (IC2-15pin) are linked with the power key on KCH-20R in power on state. Check that the signal /PSW and /PSW_OUT are IC2 is broken. 0V during the power key is pressed.
  • Page 61 Failure diagnosis of the GPS section Overview: When the GPS function does not operate, use this flowchart to determine the problem. Major parts for a GPS circuit IC706 GPS antenna (KRA-40 (option)) UART UART UART GPS antenna unit Level Coaxial cable (E0E-0034-00) conversion SAW Filter (L9) Filter...
  • Page 62 Check the Module (BT/GPS) unit PCB side B. Verify the power supply voltage Verify the BT/GPS power Fail Pass [The KRA-40 may be broken] after removing the KRA-40. supply. Replace the KRA-40. (33GPS) L6: 3.3V (33GPS) L6: 3.3V Fail Pass Verify the power supply voltage Fail and the BT/GPS control signal.
  • Page 63 Check the Main unit P CB. Verify the BT/GPS control Verify the BT/GPS control signal (G_TXD2). signal (TXD2). Fail Fail [The MPU/DSP IC is abnormal] CP705 (2pin): CN735 (15pin): Square Replace the PCB. Square waveform UART data waveform UART data of 3.3V of 3.3V logic.
  • Page 64 Failure diagnosis of the Bluetooth section Overview: When the Bluetooth function does not operate, use this flowchart to determine the problem. Major parts for a Bluetooth circuit IC706 Bluetooth antenna (Pattern Antenna) LC filter (L11) UART UART UART Level BT/GPS IC (IC5) conversion Bluetooth Level conversion IC (IC6, IC7)
  • Page 65 Pass Verify the reference clock for the [The reference clock circuit BT/GPS. for the BT/GPS is faulty] Fail (BT_CLK) Intersection of Visual check of the R9, Q1, R10, R26, R12, R13, C8 and C9: Sine waveform, X1, C4, C8, C9 (Whether not damaged) 19.2MHz 0.2 to 1.2 Vp-p Replace any abnormal parts.
  • Page 66 Pass Verify the BT/GPS control Verify the BT/GPS control Fail Fail signal (18BT_HCI_TX.). signal (RXD2). IC6 (18pin): Check the Main unit PCB (c). CN1 (7pin): Square waveform Square waveform UART data UART data of 3.3V logic. of 1.8V logic. Baud rate: Default: 115.2kbps After: 3.967Mbps.
  • Page 67 Trunking System side to reprogram the NXDN ESN number. Item (Including Parts Number) Quantity • When a new printed circuit board is used, the KENWOOD Main Unit (XCA-074) ESN changes, as does the Transceiver Information display of the KPG-D1/D1N, but this does not have any KENWOOD ESN/ NXDN ESN/ MPT ESN/ effect on the operation of the transceiver.
  • Page 68 Section 2.2.2 "How to Enter Each Mode" does not allow the transceiver to enter the firmware programming mode, for instance, when the transceiver fails to start up due to the transceiver failure. (1) Prepare the followings: • Transceiver (NX-5600HB) • Control Head (KCH-19, KCH-20R or KCH-21R) • Remote control cable (KCT-71 or KCT-77) •...
  • Page 69 PRECAUTIONS ON SCHEMATIC DIAGRAMS * Due to the improvement in performance, some part numbers shown in the circuit diagrams may not agree with those indicated in the Parts List. * The parts numbers, values and rated voltage etc. in the Schematic Diagrams are for reference only.
  • Page 70 LEVEL DIAGRAM Receiver Section 1st IF (10.7MHz) RF (Center Frequency) -106dBm -119dBm -120dBm -123dBm -114dBm -116dBm -121dBm -119dBm -113.5dBm D307 Q502 D308 Q503 Q504 Q606 D309 C372 D310 C338 Q514 Q607 C547 Q505 C534 C599 R644 C679 Q608 R638 C675 XF601 C665 Q604 C658 Q603 C653 IC706 DELAY IF IC...
  • Page 71 INTERCONNECTION DIAGRAM Q306 Q307 Q308 IC911 POWER POWER AUDIO AMP DRIVE COAXIAL RECEPTACLE-M RF ANT R347 /PRST /PSW MIC_A+ MIC_A- MIC_B+ MIC_B- 13.4 V AFoA+ AFoA- DC SUPPLY AFoB+ AFoB- CAN+ CAN- INTERFACE UNIT LITHIUM CELL XC3-073 /PRST /PRST /KEYINT /KEYINT 25pin ACCESSORY I2CCK...
  • Page 72 PRINTED CIRCUIT BOARD INTERFACE UNIT (XC3-073F-00) --- Component side view/Side A (J7C-0301-00) --- --- Foil side view/Side B (J7C-0301-00) --- R101 C105 C100 C103 C104 C101 C102 C107 IC10 R103 A-1C ADDRESS TABLE OF BOARD PARTS Y axis Side Each address may have an address error by one X axis interval.
  • Page 73 MODULE UNIT (XC2-0031-80) --- Component side view/Side A (J7C-0037-10) --- --- Foil side view/Side B (J7C-0037-10) --- XC2-003 -004 MODEL : J7C-0037 C45 C44 FCC ID : K44479250 IC : 282F-479250 A-1C ADDRESS TABLE OF BOARD PARTS Y axis Side Each address may have an address error by one X axis interval.
  • Page 74 A-1C MAIN UNIT (XC1-286F-00) ADDRESS TABLE OF BOARD PARTS Side Y axis Each address may have an address error by one interval. X axis REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION Q304 A- 2C D514...
  • Page 75 MAIN UNIT (XC1-286F-00) --- Component side view/Side A (J7C-0282-10) --- R543 R649 R539 R540 R648 L327 R347 R952 C338 R938 IC503 IC502 IC911 R934 C372 L324 Q915 R347 L325 R533 CN590 L326 L324 R958 L530 R650 R560 C971 R523 IC912 L326 R651 IC911...
  • Page 76 MAIN UNIT (XC1-286F-00) --- Foil side view/Side B (J7C-0282-10) --- L636 C699 L534 L654 L503 C728 L531 R640 C678 Q607 Q606 D502 C407 L650 C548 D501 D525 C566 Q608 R644 C380 C673 D507 C502 D524 L330 C696 R642 C567 D505 R641 D506 C1504...
  • Page 77 SCHEMATIC DIAGRAM INTERFACE UNIT (XC3-073F-00) Vref Vref /MIC_EN MICSW2 470p GND2 MICSW1 GND1 Vref MICA-_0 AFoA-_0 0.1u C107 MIC- MICB-_0 0.1u X-CoM AFoA- 0.1u Y-CoM C108 0.1u IN_oUT1 OPA170AIDRLR Separate I/F AFoB-_0 AFoA_EN oUT_IN1 TC74VHC4052AK CoNT1 /PRST AFoB- 0.1u BU7445HFV CoNT2 0.1u C101...
  • Page 78 MODULE (BT/GPS) UNIT (XC2-0031-80) 1.80V 1.80V 18BT_HCI_RX 18BT_RX 18BT_HCI_TX 18BT_TX 74AVC4TD245GU DIR1 DIR4 0.1u BT_TX_DBGX 3.31V VCC(A) EM6M2 0.1u VCC(B) DIR3 DIR2 19.2MHz L79-1987-05 VCoNT BT ANT 2.2n oUTPUT L77-3123-05 0.1u 0.1u 18BT 0.1u 0.1u 0.1u 3.17V VSS_RF_BT 0.1u BT_RF VDD_CLASS1P5_BT 0.1u STBY...
  • Page 79 MAIN UNIT (XC1-286F-00) THP1 DC-DC CONVERTER (200C) VCO-A POWER AMP C117 C119 C417 680p IC13 L107 RB561VM-40 L113 D114 Q306 200C Q102 C135 C152 C164 R159 R311 RD100HHF1C502 EMD9 D101 470p 470p RN262CS 470p R330 RN262CS C263 C120 C129 L134 4700p C122 C123...
  • Page 80 BLOCK DIAGRAM Main Unit (XC1-286) J700 /T_R IC706 Q102 /SD_DET IC702 DDRM_A[0]~DDRM_A[13] SD1_CLK DC SW VCO-A_SW DDRM_BA[0],DDRM_BA[1] SD1_CMD DDRM_CAS,DDRM_CKE,DDRM_CLKN SD1_DAT[0-3] MOBILE DDRM_CLKP,DDRM_CS DDRM_DQM[0],DDRM_DQM[1] VCO-A D101,102 D114,115 DDRM_RAS,DDRM_WE 33SD DDRM_DQS[0],DDRM_DQS[1] Interface Unit (XC3-073) Q101,100 DDRM_D[0]~DDRM_D[15] VCO-A/B VCO-A/B DC SW IC701 VCO-B TEMP /CS2,/FRST,/OE,/WP,/WE FLASH...
  • Page 81 PARTS LIST [NX-5600HB] * SAFETY PRECAUTION Parts identified by the symbol are critical for safety. Replace only with specified part numbers. * BEWARE OF BOGUS PARTS Parts that do not meet specifications may cause trouble in regard to safety and performance.
  • Page 82 Exploded view of general assembly and parts list Block No.M1MM MODULE UNIT<02> INTERFACE UNIT<03> MAIN UNIT<01> (XC1) IC911 (XC1) L316 (XC1) Q307 Q308 Q306 If a part reference number is listed in a box on the exploded view of the PCB, that part does not come with the PCB. These parts must be ordered separately.
  • Page 83 General assembly Block No. [M][1][M][M]  Symbol No. Part No. Part Name Description Local --------- M.CABINET --------- CHASSIS B09-0754-05 B43-0336-04 BADGE KENWOOD E04-0167-15 C.RECEPTACLE-M E0E-0034-00 C.RECEPTACLE-SM B41-1837-04 CAUTION STICKER HOT SURFACE B4B-0008-00 CAUTION STICKER E3A-0558-00 DC CORD E3A-0574-00 CORD WITH PLUG...
  • Page 84 Electrical parts list MAIN UNIT  Symbol No. Part No. Part Name Description Local XC1-286F-00 IC912 TC7W53FKFT *Note:This part cannot be replaced.Therefore, IC1013 MP2560DQ-LF-Z this part is not supplied as a service part. IC1014 TPS2051BDBV IC1015 TC7SZ08FEJC Block No. [0][1] LSAR523UBFS8 TRANSISTOR ...
  • Page 85  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local D507 1SV282-F VARI CAP DIODE Q700 2SC5585 TRANSISTOR D509 1SV282-F VARI CAP DIODE Q701 SSM3K15AMFV D510 1SV282-F VARI CAP DIODE Q703 SSM3K15AMFV D511 1SV282-F VARI CAP DIODE...
  • Page 86  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local CK73HB1C105K C CAPACITOR 1uF 16V K C103 CK73HB1H103K C CAPACITOR 0.01uF 50V K CK73HBB1H222K C CAPACITOR 2200pF 50V K C104 CK73HB1H103K C CAPACITOR 0.01uF 50V K CK73HB1C105K C CAPACITOR...
  • Page 87  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C176 CC73HCH1H471J C CAPACITOR 470pF 50V J C334 CC730DZ2J681J C CAPACITOR 680pF 630V J C177 CC73HCH1H0R5B C CAPACITOR 0.5pF 50V B C335 CK73HBB1H472K C CAPACITOR 4700pF 50V K C178...
  • Page 88  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C429 CC730DF2H101J C CAPACITOR 100pF 500V J C570 CK73HB1H103K C CAPACITOR 0.01uF 50V K C430 CC730DF2H101J C CAPACITOR 100pF 500V J C571 CK73HB1H103K C CAPACITOR 0.01uF 50V K...
  • Page 89  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C636 CK73HB1C105K C CAPACITOR 1uF 16V K C705 C93-1959-05 C CAPACITOR 0.1uF 16V C637 CK73HB1H103K C CAPACITOR 0.01uF 50V K C706 C93-1959-05 C CAPACITOR 0.1uF 16V C638...
  • Page 90  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C812 CC73HCH1H101J C CAPACITOR 100pF 50V J C955 CC73HCH1H101J C CAPACITOR 100pF 50V J C813 CC73HCH1H101J C CAPACITOR 100pF 50V J C971 CC73HCH1H471J C CAPACITOR 470pF 50V J C814...
  • Page 91  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local RK73JB1H103J MG RESISTOR 10kΩ 1/20W J R104 RN73HH1J100D MF RESISTOR 10Ω 1/16W D RK73JB1H102J MG RESISTOR 1kΩ 1/20W J R105 RK73HB1J272J MG RESISTOR 2.7kΩ...
  • Page 92  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R177 RK73HB1J000J MG RESISTOR 0Ω 1/16W J R371 RK73HB1J333J MG RESISTOR 33kΩ 1/16W J R178 RK73HB1J272J MG RESISTOR 2.7kΩ 1/16W J R372 RK73HH1J473D MG RESISTOR 47kΩ...
  • Page 93  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R537 RK73HB1J330J MG RESISTOR 33Ω 1/16W J R606 RK73HB1J000J MG RESISTOR 0Ω 1/16W J R538 RK73GB2A221J MG RESISTOR 220Ω 1/10W J R607 RK73HB1J220J MG RESISTOR 22Ω...
  • Page 94  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R732 RK73JB1H472J MG RESISTOR 4.7kΩ 1/20W J R811 RK73JB1H222J MG RESISTOR 2.2kΩ 1/20W J R733 RK73HB1J000J MG RESISTOR 0Ω 1/16W J R812 RK73JB1H222J MG RESISTOR 2.2kΩ...
  • Page 95  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R920 RK73HH1J103D MG RESISTOR 10kΩ 1/16W D R1119 RK73HH1J113D MG RESISTOR 11kΩ 1/16W D R921 RK73HB1J102J MG RESISTOR 1kΩ 1/16W J R1120 RK73HH1J113D MG RESISTOR 11kΩ...
  • Page 96  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local L134 L41-2775-53 CHIP INDUCTOR L523 LB73G0AM-004 CHIP FERRITE L135 L41-2775-53 CHIP INDUCTOR L524 L34-4615-05 AIR CORE COIL L136 LB73H0AV-002 CHIP FERRITE L525 LB73G0AM-004 CHIP FERRITE L138...
  • Page 97  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local L714 LB73G0AM-004 CHIP FERRITE TH303 NCU15WF104F6S N THERMISTOR L715 L92-1101-05 CHIP FERRITE TH304 NCU15WF104F6S N THERMISTOR L716 L92-1101-05 CHIP FERRITE TH305 NCU15WF104F6S N THERMISTOR L717 L92-1101-05 CHIP FERRITE...
  • Page 98 INTERFACE UNIT  Symbol No. Part No. Part Name Description Local XC3-073F-00 CK73HB1E104K C CAPACITOR 0.1uF 25V K Block No. [0][3] CK73HB1E104K C CAPACITOR 0.1uF 25V K CK73HB1E104K C CAPACITOR 0.1uF 25V K  Symbol No. Part No. Part Name Description Local CC73HCH1H220J C CAPACITOR...
  • Page 99  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local RK73HB1J820J MG RESISTOR 82Ω 1/16W J EC710AM-0550A FFC FPC CONNE RK73HB1J000J MG RESISTOR 0Ω 1/16W J EA710AC-1516B W TO B CONNE RK73HB1J000J MG RESISTOR 0Ω...
  • Page 100 Packing materials and accessories parts list Block No.M2MM Packing and accessories Block No. [M][2][M][M]  Symbol No. Part No. Part Name Description Local B5A-2531-20 INST.MANUAL E6J-0019-00 SOCKET F0G-0296-00 MOLDING COVER ACC(KCT-71) N67-4010-43 P.H.SEMS SCREW ACC(KCT-71)(x2) H02-0626-04 INNER CARTON OPTION H1C-0209-00 PACKING FIXTURE BOTTOM LEFT H1C-0210-00...
  • Page 101 MEMO...
  • Page 102 JVCKENWOOD Corporation Communications Systems Division (No.RA075<Rev.001>) Printed in Japan...