hit counter script
NEC PA1004UL-W Installation Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. PA1004UL-W
  6. Installation manual

NEC PA1004UL-W Installation Manual

Hide thumbs Also See for PA1004UL-W:
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
PA1004UL-W/PA1004UL-B
PA804UL-W/PA804UL-B
Installation Manual
Model No.
NP-PA1004UL-W/NP-PA1004UL-B/NP-PA804UL-W/NP-PA804UL-B

Advertisement

Table of Contents
loading

Related Manuals for NEC PA1004UL-W

Summary of Contents for NEC PA1004UL-W

  • Page 1 Projector PA1004UL-W/PA1004UL-B PA804UL-W/PA804UL-B Installation Manual Model No. NP-PA1004UL-W/NP-PA1004UL-B/NP-PA804UL-W/NP-PA804UL-B...

  • Page 2: Table Of Contents

    Table of Contents Introduction ............................... 3 Important Information ........................4 1. Attachment/detachment of parts sold separately ............28 1-1. Lens unit ..............................28 1-2. Option cover ............................32 2. Special installation precautions ....................35 2-1. For ceiling installation ........................35 2-2.

  • Page 3: Introduction

    (3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

  • Page 4: Important Information

    Important Information About the symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well as damage to property. The symbols and their meanings are described below. Be sure to understand them thoroughly before reading this manual.
  • Page 5 Important Information Safety Cautions WARNING Installing the projector • This projector is an RG3 product. The projector is for professional use and must be installed in location where safety is assured. For this reason, be sure to consult your dealer as installation and attachment/detachment of the BE SURE TO DO lens unit must be performed by a professional service personnel.
  • Page 6 Important Information WARNING Installing the Projector • This projector is designed to be used with a 100–240 V AC, 50/60 Hz power supply. Before using the projector, check that the power supply to which the projector is to be connected meets these requirements. BE SURE TO DO •...
  • Page 7 Important Information WARNING Do not disassemble the projector. • Do not remove or open the projector’s cabinet. Also, do not modify the projector. There are high voltage areas in the projec- tor. It may cause fire, electric shock, or laser light leakage, resulting in serious DO NOT damage to your eyesight or burns.
  • Page 8 Important Information WARNING About the projector’s light source • No direct exposure to the beam shall be permitted, RG3 IEC/EN 62471-5:2015. Operators shall control access to the beam within the hazard distance and install the product at the height that will prevent exposures of spectators’ PROHIBITION eyes within the hazard distance.
  • Page 9 Important Information CAUTION Connecting the power cord to earth • This equipment is designed to be used in the condition of the power cord connected to earth. If the power cord is not connected to the earth, it may cause electric shock. Please make sure the power cord is earthed properly. BE SURE TO DO Do not use a 2-core plug converter adapter.
  • Page 10 Important Information CAUTION Handling batteries • Handle batteries with caution. Failure to do so could lead to fire, injury or contamination of the surroundings. - Do not short-circuit or take apart batteries or dispose of them in flames. PROHIBITION - Do not use batteries other than those specified. - Do not use new batteries together with old ones.
  • Page 11 Important Information CAUTION Attaching/detaching the lens • Turn off the projector before attaching or detaching the lens unit. Failure to do so could result in visual impairment. Request your dealer to attach and detach the lens unit in the no entry area (HD). BE SURE TO DO Securing the lens unit with the fall prevention wire •...
  • Page 12 • Outline of laser emitted from the built-in light module: - Wave length: 455 nm - Maximum power: 257 W (PA1004UL-W/PA1004UL-B), 229 W (PA804UL-W/PA804UL-B) • Radiation pattern from the protective housing: - Wave length: 455 nm - Maximum laser radiation output: 333 mW Light Module •...
  • Page 13 Important Information Label Information The caution and the explanatory labels are stuck on the below indicated positions. For Canada / South America Label 1 Label 2 Label 3 Label 2 Label 3 Label 1 For other regions Label 1 Label 1 Label 2 Label 2...
  • Page 14 Important Information Laser light radiation range The figure below shows the maximum radiation range of the laser light. Horizontal angle (unit: degree) Lens position Right Center (Refer- Lens unit Zoom Right most Left most ence value) NP11FL 31.8 31.8 31.8 Tele 27.4 18.0...
  • Page 15 Important Information Horizontal angle (unit: degree) Zoom Lens unit Tele Wide — 55.8 NP44ML Vertical angle (unit: degree) Zoom Lens unit Tele NP44ML — 10.7 24.6...
  • Page 16 Important Information Hazard zone CAUTION • The below figure describes the radiation zone (hazard zone) of light emitted by the projector that is classified as Risk Group 3 (RG3) of IEC/EN 62471-5 First edition 2015. • Observe the following precautions when installing the projector. - Install the projector to prevent the eyes of the spectators from being exposed to light in the hazard zone.
  • Page 17 Important Information Applicable lens: NP11FL/NP12ZL/NP13ZL/NP14ZL/NP15ZL/NP40ZL/NP41ZL/ NP43ZL PA1004UL-W/PA1004UL-B PA804UL-W/PA804UL-B Hazard zone (m) Hazard zone (m) Lens Lens NP11FL 0.41 0.26 NP11FL 0.29 0.18 Wide 0.38 0.23 Wide 0.21 0.13 NP12ZL NP12ZL Tele 0.35 0.22 Tele 0.22 0.14 Wide 0.37 0.23 Wide 0.24...
  • Page 18 Important Information Installation example considering the precautionary zone (For lens units other than NP44ML) ① Floor or desktop installation example ② Ceiling installation example Precautionary zone Screen Screen Hazard zone Precautionary zone Hazard zone floor If it is expected that spectators will intrude into the hazard zone when installed on the ceiling (for example, if the distance between the floor CAUTION and the precautionary zone is 2 m or less), it is necessary to prevent...
  • Page 19 Important Information Installation example considering the precautionary zone (For NP44ML) ① Floor or desktop installation example ② Ceiling installation example Hazard zone Precautionary zone Hazard zone Screen Precautionary zone floor Screen CAUTION CAUTION When installing the NP44ML, there is a risk If the precautionary zone cannot be secured of intrusion into the hazard zone and the between the floor and the hazard zone,...
  • Page 20 Important Information CAUTION Please follow all safety precautions. Installing the projector • This projector is an RG3 product. The projector is for professional use and must be installed in a location where safety is assured. For this reason, be sure to consult your dealer as installation and attachment/detachment of the lens unit must be performed by a professional service personnel.
  • Page 21 Important Information Cable information Use shielded cables or cables attached ferrite cores so as not to interfere with radio and television reception. For details, please refer to User’s Manual. Notice Concerning Electromagnetic Interference (EMI) WARNING: Operation of this equipment in a residential environment could cause radio interference.
  • Page 22 Important Information Disposing of your used product In the European Union EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes projectors and their electrical accessories. When you dispose of such products, please follow the guidance of your local authority and/or ask the shop where you purchased the product.
  • Page 23 Important Information Cautions for ensuring the projector’s performance • Do not install in places subject to vibrations or shocks. If installed in places where the vibrations from power sources and the like are conveyed, or in vehicles or on vessels, etc. the projector could be affected by vibrations or shocks that may dam- age internal parts and lead to malfunction.
  • Page 24 • Be sure to attach the option cover to the projector when the projector’s power is turned on. This may result in fire. Model name of option cover NP13CV-W for PA1004UL-W/PA804UL-W NP13CV-B for PA1004UL-B/PA804UL-B Two covers are packaged with the option cover NP13CV-W and NP13CV-B.
  • Page 25 Important Information The drawings below show the installation angle required to attach the option cover A and B re- spectively. • Both option cover A and B may need to be attached depending on the installation position of the projector. •...
  • Page 26 Important Information In the direction of left and right 90° 20°–160° Option cover A must be attached 180° 0° 200°–340° Option cover A must be attached 270° NOTE: • The drawings show the image of installation angle as a reference. They are slightly from the actual one. Installation angles required to attach the option cover B Option cover B 90°...
  • Page 27 Important Information Clearance for Installing the Projector • When installing the projector, keep sufficient space around it, as described below. If not, the hot exhaust emitted from the projector may be taken back in. Also, make sure no wind from an air-conditioner hits the projector. The projector’s heat control system may detect an abnormality (temperature error) and automati- cally shut off the power.

  • Page 28: Attachment/Detachment Of Parts Sold Separately

    1. Attachment/detachment of parts sold separately 1-1. Lens unit Nine separate bayonet style lenses can be used with this projector. The descriptions here are for the NP41ZL lens. Mount other lenses in the same manner. Important: • After installing or replacing the lens unit, press the ZOOM/L-CALIB. button on the projector to carry out [LENS CALIBRATION]. By carrying out [LENS CALIBRATION], the adjustment range of the lens shift is calibrated.
  • Page 29 1. Attachment/detachment of parts sold separately 2. Remove the lens cap on the back of the lens. NOTE: • Make sure to remove the lens cap at the unit back side. If the lens unit with the lens cap remaining on is installed on the projector, it may cause of malfunction.
  • Page 30 1. Attachment/detachment of parts sold separately TIP: • Fasten the lens theft prevention screw included with the projec- tor to the bottom of the projector so that the lens cannot be removed easily. • Attach the enclosed lens mask if you want to hide the gap between the projector and lens.
  • Page 31 1. Attachment/detachment of parts sold separately Removing Preparations: 1. Turn on the projector and display an image. 2. Press and hold the SHIFT/HOME POSITION button over 2 seconds. The lens position will be moved to the home position. 3. Turn off the main power switch, and then unplug the power cord. 4.

  • Page 32: Option Cover

    1. Attachment/detachment of parts sold separately 1-2. Option cover Model name of option cover NP13CV-W for PA1004UL-W/PA804UL-W NP13CV-B for PA1004UL-B/PA804UL-B The option covers A and B are packaged with the option cover NP13CV-W and NP13CV-B. For the following cases, attach the separately sold option cover to the projector.
  • Page 33 1. Attachment/detachment of parts sold separately • Option cover A Mounting 1. Remove the two corner caps from the pro- jector. • Keep the removed corner caps for future use. 2. Turn over the projector. CAUTION • For moving the projector, make sure you have at least two people. Attempting to move the projector alone could result in back pain or other injuries.
  • Page 34 1. Attachment/detachment of parts sold separately Removing 1. Turn the two option cover A screws counterclockwise until it turns loosely. • The screws are not removable. 2. Remove the option cover A. Hold up the option cover A to release its two hooks from projector tilt foot. 3.

  • Page 35: Special Installation Precautions

    2. Special installation precautions 2-1. For ceiling installation • Never try to install the projector yourself in such cases. The projector could drop and cause injury. • When installing suspended from the ceiling, use a power outlet that is within reach so the power cord can be easily plugged and unplugged.
  • Page 36 2. Special installation precautions Cabinet Dimensions Unit: mm (inch) 599 (23.6) 299.5 (11.8) Lens center Lens center (NaN) 300 (11.8) 6-M4 150 (5.9)

  • Page 37: For Portrait Projection (Vertical Orientation)

    2. Special installation precautions 2-2. For portrait projection (vertical orientation) Portrait screens from a computer can be projected by installing the projector in a vertical orientation. Precautions during installation • Please do not install the projector in a vertical orientation on top of the floor or table on its own.
  • Page 38 2. Special installation precautions Design and manufacturing conditions for the stand Please engage an installation service provider for the design and manufacture of the customized stand to be used for portrait projection. Please ensure that the following are complied with when designing the stand.
  • Page 39 2. Special installation precautions Reference drawings * The drawing showing the dimensional requirements is not an actual stand design drawing. (Unit: mm) Exhaust Screw holes for 6 - M4 use Intake air Intake air Exhaust 300 or greater** Horizontal adjuster [Front View] [Side View] ** The example shows the right side of the body (side where the control unit is located) facing downwards.

  • Page 40: For Multi-Screen Projection

    2. Special installation precautions 2-3. For multi-Screen projection • The projector does not support stack installation. Do not stack projectors directly on top of each other. Failure to do so may cause damage or failure. • When using multiple projectors together for multi-screen projection, provide sufficient space around the projectors for air intake and exhaust.
  • Page 41 Telephone: +81 465 85 2369 Email: infomail@sharpnec-displays.eu NEC (China) Co., Ltd. In North and South America Address: Sharp NEC Display Solutions of America, Inc. 6F, Landmark diplomatic office building D2, Address: No. 19 East Road, Chaoyang District, Beijing 3250 Lacey Rd, Ste 500 100600, R.P.C.

This manual is also suitable for:

Pa1004ul-bPa804ul-wPa804ul-b

Table of Contents