GE SBSD137 Installation Instructions Manual
Hide thumbs
Also See for SBSD137:
- Installation instructions manual (12 pages) ,
- Installation instructions manual (36 pages)
Advertisement
Available languages
Available languages
Quick Links
Installation
Instructions
Instructions en français : . . . . . . . . . . . . . . . . 4
Instrucciones en español: . . . . . . . . . . . . . . . 8
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT
•
for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Consumer – Keep these instructions with
your Owner's Manual
for future reference.
• Completion time – 1 to 2 hours
• Proper installation is the responsibility
of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
CAUTION
of these products, and to reduce the risk of
personal injury or damage to the product,
TWO PEOPLE ARE REQUIRED
FOR PROPER INSTALLATION.
• See washer and dryer installation instructions
for additional installation requirements and
guidelines.
KIT CONTENTS
4 Support Pads
4 Mounting Screws
Drawer Divider
49-90321-2
175D1807P589
For Washer Models: GBVH5140, GBVH6260, GCVH6260, GCVH6600, GCVH6800, GFAN1000,
GFAN1100, GFWH1200, GFWH1300, GFWH1400, GFWH1405, GFWH2400,
GFWH2405, GFWN1000, GFWN1100, GFWN1200, GFWN1300, GFWS1500,
GFWS1505, GFWS3500, GFWS3505, GHDVH626, GHDVH670, GMAN1200, WBVH5100,
WBVH6240, WCVH5300, WCVH6260, WCVH6600, WCVH6800, WHDVH626 & WHDVH660
For Dryer Models: DBVH510, DBVH512, DCVH515, DCVH660, DHDVH52, DHDVH66,
GFDM245, GFDN100, GFDN110, GFDN120, GFDN130, GFDN240, GFDN245,
GFDS140, GFDS145, GFDS150, GFDS155, GFDS350, GFDS355, GFMN100,
GFMN110, GFMN240, GFMS350, GFMS355, GMMN120, PBVH415, PCVH565,
PCVH680, PDVH515, PHDVH52 & PHDVH57
11-13 GE
1
SBSD137, SBSD227
TOOLS YOU WILL NEED
Phillips Head
Screwdriver
9/16" Open End Wrench
or Adjustable Wrench
8 mm Socket Wrench
INSTALLATION PREPARATION
Remove the packaging.
The Drawer divider is taped at the top of the
shipping carton. Remove the divider and set aside
for final installation.
Flatten the product carton to use as a pad
to lay the washer or dryer down on its side.
Continue using the carton to protect the finished floor
in front of the installation location.
1 REMOVE THE LEVELING LEGS
Carefully lay the washer or dryer on its side to
A
access the leveling legs on the bottom of the
appliance.
IMPORTANT: Do not lay the washer or dryer on
its back! Do not remove the shipping bolts on the
back side of the washer. The bolts must remain in
place until the washer is returned to an upright
position.
Use an open-end wrench to remove the
B
washer or dryer leveling legs.
Back out and remove
all 4 leveling legs
Advertisement
Related Manuals for GE SBSD137
Summary of Contents for GE SBSD137
- Page 1 SBSD137, SBSD227 For Washer Models: GBVH5140, GBVH6260, GCVH6260, GCVH6600, GCVH6800, GFAN1000, Installation GFAN1100, GFWH1200, GFWH1300, GFWH1400, GFWH1405, GFWH2400, GFWH2405, GFWN1000, GFWN1100, GFWN1200, GFWN1300, GFWS1500, GFWS1505, GFWS3500, GFWS3505, GHDVH626, GHDVH670, GMAN1200, WBVH5100, Instructions WBVH6240, WCVH5300, WCVH6260, WCVH6600, WCVH6800, WHDVH626 & WHDVH660...
- Page 2 Installation Instructions 2 PREPARE THE PEDESTAL 3 INSTALL THE PEDESTAL TO THE WASHER OR DRYER Pull the drawer out Place the pedestal against the bottom as far as it of the unit. Check to be sure the drawer front will go. is at the front of the unit.
- Page 3 Installation Instructions 4 LEVEL THE WASHER OR DRYER 6 REMOVE SHIPPING SCREWS Locate the 4 legs from the parts package and Remove the 4 shipping screws on the back side of the install. unit. Stand the washer or dryer upright. Move it close to its final location.
- Page 4 SBSD137, SBSD227 Pour les modèles laveuses : GBVH5140, GBVH6260, GCVH6260, GCVH6600, GCVH6800, Instructions GFAN1000, GFAN1100, GFWH1200, GFWH1300, GFWH1400, GFWH1405, GFWH2400, GFWH2405, GFWN1000, GFWN1100, GFWN1200, GFWN1300, GFWS1500, GFWS1505, GFWS3500, GFWS3505, GHDVH626, GHDVH670, d’installation GMAN1200, WBVH5100, WBVH6240, WCVH5300, WCVH6260, WCVH6600, WCVH6800, WHDVH626 et WHDVH660 Pour les modèles sécheuses : DBVH510, DBVH512, DCVH515, DCVH660, DHDVH52,...
- Page 5 Instructions d’installation 1 RETIREZ LES PIEDS 2 PRÉPAREZ LE SOCLE DE NIVELLEMENT aussi loin que le côté pour accéder IMPORTANT: ne déposez pas la laveuse ou la glissières de sécheuse sur le dos ! Ne retirez pas les boulons revienne en position verticale. de côté.
- Page 6 Instructions d’installation 3 INSTALLEZ LE SOCLE À LA LAVEUSE 4 METTEZ LA LAVEUSE ET OU LA SÉCHEUSE LA SÉCHEUSE À NIVEAU est à l’avant de l’appareil. l’appareil de sa position finale. pour installer les 4 vis à travers d’avant vers l’arrière. ouverte pour vers l’intérieur et du socle.
- Page 7 Instructions d’installation 5 RÉINSTALLEZ LE TIROIR 6 RETIREZ LES VIS D’EXPÉDITION vous assurer que les glissières sont fermées. 7 FINALISEZ L’INSTALLATION Séparateur le tiroir de tiroir dans de la laveuse ou de la sécheuse pour terminer l’ouverture. l’installation. supports du tiroir avec les glissières de chaque côté.
- Page 8 SBSD137 Instrucciones Para los modelos de lavadoras: para la instalación Para los modelos de secadoras: ANTES DE COMENZAR HERRAMIENTAS NECESARIAS Destornillador con Lea atenta y completamente todas las instrucciones. IMPORTANTE • Llave de extremo o instrucciones para que el inspector local pueda ajustable de 9/16”...
- Page 9 Instrucciones para la instalación 1 RETIRE LAS PATAS NIVELADORAS PREPARE EL PEDESTAL Jale el cajón hacia de lado para tener acceso a las patas fuera hasta que niveladoras que se encuentran en la parte inferior del artefacto. Retire los tornillos IMPORTANTE: ¡no apoye la lavadora o secadora de las correderas del cajón.
- Page 10 Instrucciones para la instalación 4 NIVELE LA LAVADORA 3 INSTALE EL PEDESTAL EN O SECADORA LA LAVADORA O SECADORA Busque las cuatro patas del paquete Coloque el pedestal contra la parte inferior de la unidad. Verifique que el frente del cajón quede hacia el frente de la unidad.
- Page 11 Instrucciones para la instalación 5 VUELVA A INSTALAR EL CAJÓN RETIRE LOS TORNILLOS DE ENVÍO Ver ifique que las correderas Retire los 4 tornillos de envío en la parte posterior de la unidad. Deslice el cajón en la abertura. 7 FINALICE LA INSTALACIÓN Alinee los Divisor soportes...
- Page 12 Impreso en China...