Setting Your Own Color Profile - Panasonic PT-AX200U Operating Instructions Manual
2000 ansi lumens widescreen high definition home theater projector
Hide thumbs
Also See for PT-AX200U:
- Service manual (75 pages) ,
- Brochure (31 pages) ,
- Operating instructions manual (54 pages)
Table of Contents
Advertisement
Remote control operation
Setting your own color profile
You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting.
Press the COLOR MANAGEMENT button to open the menu.
PROFILE
CURSOR
LOG
PROFILE SAVE
PROFILE DELETE
PROFILE NAME CHANGE
Adjusting the selected color
Select a color and adjust COLOR, TINT and
BRIGHTNESS.
1. Select the CURSOR menu and press ENTER.
The projected image is captured, and the target
cursor is displayed.
When the LOG is fully stored, the target cursor will
not be displayed. See "Managing stored logs" on
page 24.
Target cursor
2. Move the cursor with F G I H to the required
place to select a color and press ENTER.
The color at the center of the target cursor is
sampled and the sample box is displayed on the left
of the cursor. The menu items are displayed on the
upper part of the screen.
CURSOR
SELECT
DEFAULT
Sampled color
E
24 -
NGLISH
NORMAL
RETURN
COLOR
TINT
ENTER
BRIGHTNESS
3. Select a menu item and the I H to adjust each
item level.
The result box is displayed on the right of the cursor
and shows the adjusted color.
CURSOR
RETURN
COLOR
TINT
SELECT
ENTER
BRIGHTNESS
DEFAULT
Adjust the vividness of the color.
COLOR
Setting range: -30 to +30
Adjust the color tone.
TINT
Setting range: -30 to +30
Adjust the brightness of the color.
BRIGHTNESS
Setting range: -20 to +20
4. Press ENTER to store the adjusted result.
"PROCESSING" is displayed for a few seconds and
the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
5. Press MENU or RETURN to return to the previous
menu.
Repeat the steps above to store more adjustment.
Managing stored logs
You can edit or delete the stored logs of the
selected PICTURE MODE.
1. Select LOG and press ENTER.
The LOG menu is displayed.
PICTURE MODE : CINEMA1
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Sampled color
2. Select the required log from 1 - 8 or ALL DELETE,
and press ENTER.
Select CHANGE to edit the log.
The cursor menu is displayed and you can readjust
the color.
Select DELETE to delete the log.
The confirmation screen will be displayed. Select OK
to delete.
When you select ALL DELETE, the "DELETE ALL
LOG." screen is displayed. Select OK to delete all
logs. The PROFILE setting will be set to NORMAL.
Adjusted color
Adjusted color
Hide quick links:
Advertisement
Table of Contents
