Mounting; Installation Site; Carrier Rail Mounting; Figure 7: Mounting The Carrier Rail Mounting - WAGO 852-111 Mounting, Installation And Handling

5 port 100base-tx industrial eco switch

Hide thumbs Also See for 852-111:

Table of Contents

WAGO ETHERNET Accessories 852

852-111 5 Port 100BASE-TX Industrial ECO Switch

Mounting

5.1

The location selected to install the industrial ECO switch may greatly affect its

performance. When selecting a site, we recommend considering the following

rules:

•

Install the industrial ECO switch at an appropriate place. See chapter

"Technical Data" for the acceptable temperature and humidity operating

ranges.

•

Fix the provided brackets at the back of the industrial ECO switch to a

carrier rail to protect the industrial ECO switch from falling.

Make sure that the heat output from the industrial ECO switch and ventilation

around it is adequate. Do not place any heavy objects on the industrial ECO

switch.

5.2

The carrier rail must optimally support the EMC measures integrated into the

system and the shielding of the internal data bus connections.

Remove the screws on the back of the industrial Eco switch.

Screw the carrier rail mounting to the back of the industrial Eco switch.

Rest the industrial Eco switch on the carrier rail.

Parallel and perpendicular mounting is possible.

Manual

Version 1.1.0, valid from FW/HW Version 01/06

Mounting

Table of Contents

Table of Contents