Advertisement
Quick Links
OptiX RTN PI-DC B10
Product Overview and Quick Installation Guide
Issue: 05
Date: 2018-10-30
HUAWEI TECHNOLOGIES CO., LTD .
Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
support@huawei.com
Safety Precautions
• The equipment that collect to the GE electrical port must have surge protection capabilities. If the equipment does not
have surge protection capabilities, the PIs should be installed indoors for surge protection and easy maintenance.
• Always hold an insulated part of the P&E cable. Never touch the RJ45 connector.
• Do not touch the pins inside the P&E port on the PI with your hands or a conductor.
• Be sure to connect the power cables of the PI correctly to the positive and negative terminals of the power supply
device .To prevent damage to power cables or devices caused by short-circuits, install a circuit breaker on the
negative terminal of the power supply device.
• Do not install or remove a live P&E cable.
01
Advertisement
Related Manuals for Huawei OptiX RTN PI-DC B10
Summary of Contents for Huawei OptiX RTN PI-DC B10
- Page 1 • Do not install or remove a live P&E cable. HUAWEI TECHNOLOGIES CO., LTD . Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
-
Page 2: Product Overview
Product Overview The RTN PI-DC B10 is a full-outdoor PI. It uses DC power input and transmits GE electrical signals and -48 V power signals to the full-outdoor RTN 300 equipment through an outdoor network cable. Appearance and Ports Port Description The GE electrical port is compatible with an FE electrical port and supports the MDI, MDI-X, and auto- MDI/MDI-X modes. - Page 3 Product Overview Principles and Application Scenarios Principles Application Scenarios The RTN PI-DC B10 receives one channel of DC power signals and one channel of GE service signals. Mapping between powered device types and power supply modes The signal coupling module couples DC power signals and GE service signals into P&E signals and outputs the P&E signals to the P&E port.
-
Page 4: Technical Specifications
Product Overview Technical Specifications Power Supply Electromagnetic Compatibility and Safety Compliance Item Description Item Description DC input, with the voltage ranging from –38.4 V to –57.6 V •Passed CE authentication. Input voltage Electromagnetic compatibility Input power cable diameter 2.5 mm •Passes CE certification. - Page 5 Installation Reference Open the cover of the PI. Install PI cables. Loosen the screws on the cover and open the Remove the plugs in the cable holes that will hold cables. cover (4.8±0.48 N· M). Avoid dropping any metal scraps or other miscellaneous For the peeling sizes of cables, see the 1:2 peeling objects on the front panel or in any ports or cracks in the PI.
- Page 6 Installation Reference Optional: Install the PI on a wall. Close the cover of the PI and tighten all screws on the cover. Mark and drill holes in the wall. •Follow the order from 1 to 8 when you tighten the Hold the PI up to the w all and mark the drilling positions.
- Page 7 Installation Reference Optional: Install the PI on a pole or a tower. Install the PGND cable of the PI. Guide a hose clamp through the holes and fix the hose clamp on the pole or tower. The di ameter of the pole i s 48 mm to 114 mm.