Huawei PowerCube 500 Quick Manual
Kenya safe city
Hide thumbs
Also See for PowerCube 500:
- User manual (67 pages) ,
- Manual (14 pages) ,
- Configuration manual (13 pages)
Advertisement
Quick Links
PowerCube 500 Quick Guide (Kenya Safe City, PC500-300G1)
Issue: 01
Date: 2018-05-20
1
Overview
Appearance
Function module: PC500-300G1
Lithium battery: CBM20E-N14A1
Function
Module
Color
Status
Indicator
Off
Blinking
Run
slowly
Green
indicator
(0.5 Hz)
Blinking
fast (4
Hz)
Off
Blinking
Alarm
slowly
Yellow
indicator
Steady
on
Off
Blinking
Fault
Red
slowly
indicator
Steady
on
Meaning
The function module has no power input
or is faulty.
The function module is communicating
properly with upstream monitoring
equipment.
The function module fails to
communicate with upstream monitoring
equipment.
There is no alarm.
The function module has generated an
alarm, which can be cleared.
The function module has generated an
AC power failure or PV array fault alarm,
which can be cleared.
The function module is normal.
The function module has an external
fault, which can be cleared.
The function module has an internal fault,
which cannot be cleared.
Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
Grid Hybrid Scenario
Connective kit
Bullet cameras
Cantilever
Dome camera
Lithium battery
Lithium battery
Lithium
Battery
Color Status
Indicator
Off
Steady on The lithium battery is powered on.
Run
Blinking
Green
slowly
indicator
(0.5 Hz)
(RUN)
Blinking
fast (4 Hz)
Off
Alarm
Steady on
Red
indicator
Blinking
(ALM)
slowly
(0.5 Hz)
NOTE
The three indicators are steady on when the power unit of the
function module is upgrading. They return to normal status after the
upgrade is complete.
1
Lightning rod
Bullet cameras
Dome camera
Cantilever
Pole mounting kit
Function module
Pole
Meaning
The lithium battery has no power input
or is faulty.
The lithium battery is communicating
properly with upstream monitoring
equipment.
The lithium battery fails to
communicate with upstream
monitoring equipment.
There is no alarm.
The lithium battery has generated a
fault alarm and needs to be replaced.
The lithium battery has generated a
protection alarm, which can be cleared.
Advertisement
Related Manuals for Huawei PowerCube 500
Summary of Contents for Huawei PowerCube 500
- Page 1 PowerCube 500 Quick Guide (Kenya Safe City, PC500-300G1) Issue: 01 Date: 2018-05-20 Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved. Overview Appearance Grid Hybrid Scenario Function module: PC500-300G1 Lightning rod Bullet cameras Connective kit Dome camera Bullet cameras...
- Page 2 Tools Routing Cables Through the Pole 1. Place the pole on a wooden case or a similar object. 2. Route a pull wire. 3. Route cables. NOTE The cables routed from the pole cable hole have a length of 1.5 m reserved. The cables routed from the cantilever cable hole have a length of 0.5 m reserved.
- Page 3 Installing Cantilevers 1. Install the cantilevers. 2. Adjust the connective kit according to the actual situation to adjust the relative angle between the two cantilevers. Installing Cameras and Cables Installing Cameras For the camera installation method, see the camera document. Installing Camera Cables For the cable connections at the camera side, see the camera document.
- Page 4 2. Install the pole 1. Use a positioning NOTE mounting kit. sticker to mark the Ensure that the arrow on the top of the pole mounting kit points exactly to the middle installation position for point on the top of the positioning sticker. the pole mounting kit.
-
Page 5: Installing Cables
Installing Cables NOTE Route inter-device cables through the pole. Installing Ground Cables for Modules 1. Connect ground cables between the function module and lithium batteries. 2. Connect the other end of the module ground cable to the pole ground bar. Function module Lithium battery Lithium battery... - Page 6 4. (Optional) Install signal cables for non-P&E cameras. 5. (Optional) Install power cables for non-P&E cameras. NOTICE The power cable for the dome camera can only be connected to the 24V AC port. One PC500-300G1 can supply power to one non-P&E dome camera.
- Page 7 9. Close the maintenance compartment door. 8. Install optical fibers. 10.Push down the sunshade until NOTE the spring Before closing the maintenance compartment fastener is stuck door, check that cables are properly installed. gently. After closing the door, press the left side of the maintenance compartment door by hand and tighten the screws.
- Page 8 Installing Power Cables and Signal Cables NOTICE Ensure that caps and waterproof connectors are installed at all idle ports on the modules. Installing an RJ45 Communications Cable for a Lithium Battery Connecting Cables Between the Function Module and Lithium Batteries AC input Function module Lithium battery...
-
Page 9: Verifying The Installation
Install a Cable Cover for the Lithium Battery Erecting the Pole 1. Check whether the pole needs to be repainted. Repaint the damaged area 2. Secure the pole to the foundation. of the pole, and then use the crane to hoist the pole to the foundation. Verifying the Installation 1. - Page 10 Logging In to the Web Server 12.2 1. Use a mobile phone or laptop to search for devices by NOTE searching for WIFI. (Set the laptop to automatically obtain Default WIFI IP, even after the WIFI will automatically assign an IP name: RMn-******.
- Page 11 For the camera commissioning method, see the camera document. 12.6 Checking Alarms 1. Choose Configuration > Browse Current Alarms from the Function Tree. 2. Check the displayed alarm information. Huawei Technologies Co., Ltd. Huawei Industrial Base, Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com...