Oven Controls - GE JRP20 Owner's Manual
Hide thumbs
Also See for JRP20:
- Owner's manual (28 pages) ,
- Installation instructions (4 pages) ,
- Dimensions and installation information (2 pages)
Table of Contents
Advertisement
Oven Controls
1. BAKE:
Touch this pad to select the bake function.
Bake Light:
change the oven temperature at this point. Glows
when the oven is in bake mode.
2. BROIL HI/LO:
function. See the Cooking Modes section for more
information.
Broil Light:
when the oven is in bake mode.
3. DISPLAY:
Shows the operations you have
selected, the time of day and the cooking status.
4. COOKING TIME:
touch the + or – pad to set the amount of time you
want your food to cook. The oven will shut off when
the cooking time has run ou
5. DELAY START:
and stop automatically at a time you set.
6. OVEN LIGHT ON/OFF:
turn the oven light on or off.
7. TIMER/CLOCK:
timer feature. Then touch + and – pads to adjust
time. To set the clock, touch this pad twice and hold
3 seconds and then touch the + and – pads. The
time of day will flash in the display when the oven is
first turned on.
Lower Oven Control (on some models)
OVEN TEMP
setting you want.
The OVEN CYCLE light glows until the oven reaches
your selected temperature, then goes off and on with the
oven element(s) during cooking.
6
Touch this pad to select the broil
Touch this pad and then
Touch this pad to
Touch this pad to select the
8. START:
Must be touched to start any cooking
function.
9. – Pad:
Short taps to this pad will decrease the
time or temperature by small amounts. Touch and
hold the pad to decrease the time or temperature by
larger amounts.
10. + Pad:
Short taps to this pad will increase the time
or temperature by small amounts. Touch and hold
the pad to increase the time or temperature by larger
amounts.
11. CLEAR/OFF:
operations except the clock and timer.
12. SELF CLEAN:
Touch this pad to select the self-
oven section.
13. CLEAN LIGHT:
you can change the length of time for the self-clean
cycle at this point. Glows when the oven is in the
self-clean cycle. After the self-clean cycle, the light
oven control signals, this indicates a function error code.
one hour. Put the oven back into operation.
oven and call for service.
49-80715 Rev. 1
Advertisement
Table of Contents
