Page 1
Quick Installation Guide 4G LTE VPN 路由器 This document will guide you through the basic installation process for your new D-Link 4G LTE VPN Router. DWR-925 Quick Installation Guide...
Before You Begin This Quick Installation Guide gives you step-by-step instructions for setting up your DWR-925 4G LTE VPN 路由器. The model you have purchased may appear slightly different from the one shown in the illustrations. For more detailed information about the router, please refer to the User Manual.
Front Panel Figure 1 Item Description 3G/4G MAIN SMA female connector - Main Antenna for 3G/4G. Mini-SIM Slot The router uses a 2FF-size or mini-SIM for 3G/4G. 3G/4G DRX SMA female connector - Diversity Antenna for 3G/4G. Table 1 DWR-925...
Blinking Green Data transfer in progress. Solid Green Connected to SIM A LTE network. Flashing Green Fallback to SIM A 3G/2G network. No service/SIM error/APN error. Solid Green Indicates a 2G/3G/4G WLAN connection. WWAN Blinking Green Data transfer in progress. DWR-925...
12 V/DC 1A barrel connector. Power On/Off Press to toggle power. Wi-Fi Antenna 1 SMA male connector - Wi-Fi 1. 3G/4G DRX SMA female connector - Diversity Antenna for 3G/4G Included antennas are interchangeable, but third party antennas may not be. Table 3 DWR-925...
Observe the following precautions to help prevent shutdowns, equipment failures, and personal injury: • Install the DWR-925 in a cool and dry place. Refer to the technical specifications in the user manual for the acceptable operating temperature and humidity ranges.
Page 7
Attaching the External Antennas Figure 4: Attaching External Antennas The DWR-925 requires four external antennas to function correctly: two blade antennas for 3G/4G, and two Wi-Fi antennas. The included antennas are interchangeable, but third party antennas may require connection to specific ports.
Page 8
Figure 5: Router with Correctly Attached Antennas Note: The included antennas are interchangeable. Third party antennas may require connection to specific ports. DWR-925...
Installing a SIM card The DWR-925 is equipped with a 2FF size mini-SIM. An active SIM card is required for 3G/4G access. 1. Unscrew the SIM slot cover on the front of the device. 2. Insert a mini-SIM card into the slot with the contacts facing down.
DWR-925 power port on the rear panel. 2. Attach the AC adapter to an appropriate AC socket. Connecting Devices After the DWR-925 has been successfully installed, the router can be connected to the end device via the following connection methods: Over Ethernet The Ethernet port can be connected to an end device.
The D-Link router can be managed by using either the Web User Interface (Web UI) or Telnet management interfaces. If you wish to manage a single D-Link router, the Web UI may be the best option. Each router must be assigned its own IP address, which is used for communication with the management PC.
Additional help is available through our offices listed at the back of the user manual or online. To find out more about D-Link products or marketing information, please visit the D-Link website at: http://www.dlink.com/.