Please read this user manual first! Dear Customer, Thank you for prefering a Beko Euromed product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference.
Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • The dryer can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are...
Important instructions for safety and environment • You may only put laundry that is not dirty or stained but permeated with unpleasant odour in steam (odour removal) program. • Do not use any dry cleaning sets or additional materials in a steam program or in any program.
Important instructions for safety and environment Damaged mains cable should be changed notifying the Authorized Service. If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock! 1.1.2 Product safety Superheating of the clothes inside of the dryer can occur if you cancel the programme or in the event...
Page 6
Important instructions for safety and environment Below specified laundry or items must not be dried in the dryer due to the fire hazard: • Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads.
Page 7
Important instructions for safety and environment Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying. Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading.
Important instructions for safety and environment • Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels. • The final step of the drying cycle (cool-down cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them.
Important instructions for safety and environment 1.3 Intended use • Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • Use the dryer only for drying laundry that are marked accordingly.
Important instructions for safety and environment 1.5 Compliance with the WEEE regulation and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
Important instructions for safety and environment 1.8 Technical Specifications Height (min./max.) 84.6 cm / 86. cm* Width 59.5 cm Depth 60.9 cm Laundry drying capacity (max.) 8 kg** Net weight (use of plastic lid) 37 kg Net weight (use of glass lid) 39,5 kg Voltage Power...
Your Dryer 2.1 Overview 1. Top panel 2. Control panel 3. Loading door 4. Kick plate opening button 5. Ventilation grids 6. Adjustable legs 7. Kick plate 8. Type label 9. Lint filter 10. Water tank drawer 11. Power cord 2.2 Package Contents 1.
Installation Before the calling the nearest Authorized Do not place the dryer on the Service for the installation of the dryer, ensure power cable. that electrical installation and water drain is appropriate referring to the user’s manual. 3.2 Removing the transportation If they are not suitable, contact a qualified safety assembly electrician and technician to make necessary...
Installation 3.6 Changing the illumination Water drain hose should be lamp attached to a height of maximum 80 cm. In case an illumination lamp is used in your laundry dryer.To change the Bulb/LED used Make sure that the water drain for illumination of your tumble dryer, call your hose is not stepped on and it is not Authorized Service.The lamp(s) used in this...
Preparation 4.1 Laundry suitable for drying keep it open for a long time. in the dryer • Do not add wet laundry while the dryer is in operation Always obey the instructions given on the garment tags. Dry only the laundry having a •...
Page 16
Preparation Following weights are given as examples. Approximate Laundry weights (g)* Cotton quilt covers 1500 (double) Cotton quilt covers 1000 (single) Bed sheets (double) Bed sheets (single) Large tablecloths Small tablecloths Tea napkins Bath towels Hand towels Blouses Cotton shirts Shirts Cotton dresses Dresses...
Operating the product 5.3 Preparing the machine 5.5 Main programmes Plug in your machine. Depending on the fabric type, the following Place the laundry in the machine. main programmes are available. Press the On/Off/Cancel button for 1 • Cottons second (long). Dry durable laundry with this programme.
Operating the product • BabyProtect This programme is used for baby clothes that bear machine dryable approval on its label. • Daily This programme is used to dry cottons and synthetics daily, and lasts for 72 minutes. • Shirt This programme dries the shirts more sensitively and creases them less and thus, helps to iron them more easily.
Operating the product 5.8 Auxiliary functions Audio Warning The machine will give an audio warning when the programme comes to an end. Use the Audio Warning Level button to adjust the sound level. You can change the sound level Drying level damp either before the programme starts or while the programme is in progress.
Operating the product Select the programme with the programme knob; select the auxiliary functions such as Anti-creasing, Dryness Level etc. Press and hold the Favourite selection button for about 3 seconds. Features of set programme will be saved. Anti-creasing 0 minute 5.9 Warning symbols Anti-creasing 30 minute Warning symbols may differ...
Operating the product Cleaning the condenser Additional laundry may be loaded Warning symbol flashes with certain intervals / taken out during the End time. to remind that the condenser needs to be At the end of the countdown cleaned. process, end time symbol disappears, drying process starts and the programme duration is displayed.
Operating the product 5.12 Child Lock the Programme Selection knob. Press the Start/Pause button to start Machine is equipped with a Childproof Lock the program. which prevents interfering with the current Adding / removing laundry in Pause mode programme flow by pressing any button. All In order to add or take out laundry after the buttons except the On/Off/Cancel button on drying programme has started:...
Operating the product 5.14 Canceling the programme If you want to stop drying and cancel the programme for any reason after the machine has started to run, press and hold the On/ Off/Cancel button for 3 seconds. CAUTION: As the inside of the machine will be excessively hot when you cancel the program while the machine is running,...
Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals. 6.1 Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter.
aintenance and cleaning To drain the water tank: Do not use metal tools when Remove the water tank in the drawer or cleaning metal surfaces of the container carefully. sensors. CAUTION: Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! Drain the water in the tank.
Page 28
aintenance and cleaning Pull out the condenser. 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely.
Troubleshooting Drying operation takes too long. • Fibre filter pores might be clogged. >>> Wash the filter with warm water. • Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the filter drawer. (for the products with a heat pump) •...
Page 30
The lighting inside the drying machine does not turn on. (For models with a lamp) • Drying machine might not be turned on with the On/Off button or program might not be selected for machines without an On/Off button. >>> Make sure that the drying machine is turned on.