Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele G 6993
Summary of Contents for Miele G 6993
-
Page 1: Operating Instructions
Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation sheet before it is installed and used for the first time. en-AE, SA HG05 M.-Nr. -
Page 2: Table Of Contents
Contents Guide to the appliance .................. 5 Overview........................5 Control panel ......................6 Display........................7 Warning and Safety instructions................ 8 Caring for the environment ................ 17 Energy saving washing..................18 EcoFeedback consumption indicator..............19 Before using for the first time ................ 20 Opening the door .................... - Page 3 Contents At the end of the programme ................48 Switching off......................49 Unloading the dishwasher..................49 Interrupting a programme..................50 Changing a programme..................50 Programme options..................... 51 Extras ........................51 Delay start with EcoStart..................53 Heat exchanger ..................... 56 DetergentAgent ..................... 57 Programme chart ....................
- Page 4 Contents Plumbing ...................... 85 The Miele waterproof anti-leak system ..............85 Connection to the water supply ................85 Drainage ........................ 87 Technical data...................... 88 Technical data ....................... 88 Settings menu...................... 89 To open the Settings menu ................... 89 Language ......................90 Time........................
-
Page 5: Guide To The Appliance
Guide to the appliance Overview a Upper spray arm (not visible) g Filter combination b Cutlery tray (depending on model) h Data plate c Upper basket i Rinse aid reservoir d Middle spray arm j Dual compartment detergent dispenser e Heat exchanger (depending on k TimeControl in-operation indicator model) lights... -
Page 6: Control Panel
Guide to the appliance Control panel a On/Off button e Back button For switching the dishwasher on and For navigating back to the previous off. menu or deleting values which have been set previously. b TimeControl in-operation indicator f OK sensor lights For displaying programme time... -
Page 7: Display
Guide to the appliance The scroll bar on the right of the Display display indicates that more options or General more text are available which can be displayed by touching the relevant The display is used to select or set the arrow sensor . -
Page 8: Warning And Safety Instructions
Keep the installation sheet and the operating instructions in a safe place and pass them on to any future owner. Miele cannot be held liable for damage caused by non-compliance with this information. - Page 9 Warning and Safety instructions Correct application This dishwasher is intended for use in domestic households and similar working and residential environments. The dishwasher is not intended for outdoor use. It must only be used as a domestic appliance as specified in these operating instructions, for cleaning domestic crockery and cutlery.
- Page 10 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. Children 8 years and older may only use the dishwasher unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
- Page 11 Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged dishwasher is dangerous. Check it for any recognisable damage. Never install or attempt to use a damaged appliance.
- Page 12 Warning and Safety instructions To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage and frequency) match the mains electricity supply before connecting the dishwasher to the mains. Consult a qualified electrician if in doubt. ...
- Page 13 If the connection cable is damaged it must be replaced with a special cable of the same type (available from Miele). For safety reasons this work must be carried out by a Miele authorised service technician only.
- Page 14 This special lamp must only be used for the purpose it is intended for. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or your Miele dealer.
-
Page 15: Correct Use
Warning and Safety instructions Correct use Do not use solvents in the dishwasher. Danger of explosion. Do not inhale or ingest dishwasher detergent. Dishwasher detergents can cause burning in the nose, mouth and throat if swallowed, or inhibit breathing. Seek medical attention immediately if detergent has been swallowed or inhaled. - Page 16 Please observe the information given in "Technical data" regarding the capacity of the dishwasher. Accessories Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
-
Page 17: Caring For The Environment
Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice. Ensure that it presents no danger to children while being stored for disposal. -
Page 18: Energy Saving Washing
Caring for the environment Energy saving washing This dishwasher is exceptionally economical in its use of water and electricity. You can make the most of your appliance by following these tips: – For most economical dishwashing, make full use of the baskets without overloading the dishwasher. -
Page 19: Ecofeedback Consumption Indicator
Caring for the environment 2. Actual consumption EcoFeedback consumption indicator At the end of the programme you can call up the actual amount of energy and Consumption function is used for water used by the programme which calling up information about the energy has just been run. -
Page 20: Before Using For The First Time
Before using for the first time Opening the door Water in the dishwasher may be hot. Danger of scalding. This dishwasher has a motorised door opener which is activated by knocking Only open the door during operation if absolutely necessary and exercise on the door front ("Knock2open function"). -
Page 21: Emergency Door Opener
Before using for the first time Emergency door opener If the door will not open when knocked or if there is a power cut the door can be opened manually with the Knock2open device supplied with the dishwasher. Then use it to pull the door open. Closing the door ... -
Page 22: Basic Settings
Before using for the first time Time of day Basic settings The display will then change to the Open the door. screen for setting the time. Switch the dishwasher on using the The current time of day must be set ... - Page 23 Before using for the first time Water hardness Finally, prompts will appear in the display. The display will change to the screen for setting the water hardness. After confirming these with , both the and indicators will light up. –...
-
Page 24: Before Using The Appliance For The First Time, You Require
Before using for the first time Before using the appliance for If the water in your area is very soft the first time, you require: and constantly lower than 0.9 mmol/l (5 °d - German scale) you do not – approx. 1 kg dishwasher salt, have to add dishwasher salt. -
Page 25: Adding Salt
Before using for the first time Adding salt Do not fill the reservoir with water. When filling the salt reservoir only open the door halfway to ensure that all the salt gets into the reservoir. Add salt only until the reservoir is full or until water runs out of the opening. -
Page 26: Add Salt Reminder
Before using for the first time Add salt reminder If you only ever use combination products containing salt and rinse aid When Insufficient salt appears in the in your dishwasher, you can switch the display wait until the end of the reminders off if you wish (see programme and then refill the salt "Settings menu, Refill reminders"). -
Page 27: Rinse Aid
Before using for the first time Rinse aid If you only ever use combination products containing rinse aid in your Rinse aid is necessary to ensure water dishwasher, you do not need to add does not cling and leave marks on rinse aid. -
Page 28: Add Rinse Aid Reminder
Before using for the first time Add rinse aid reminder When the Insufficient rinse aid message appears, the reservoir contains sufficient rinse aid for 2 - 3 programmes only. Add rinse aid in plenty of time. Confirm with OK. The message will go out. -
Page 29: Loading The Dishwasher
Loading the dishwasher – Make sure that small items cannot Notes fall through the holders in the Remove coarse food residues from baskets. crockery. Small items, e.g. lids, should therefore be placed in the cutlery tray There is no need to rinse items under or cutlery basket (depending on running water. - Page 30 Loading the dishwasher Items not suitable for dishwashers: Aluminium components (e.g. – Wooden cutlery and crockery or cooker hood grease filters) must not items with wooden parts: these may be cleaned with caustic alkaline discolour and fade. The glue used in commercial or industrial cleaning these items is not dishwasher-proof agents.
-
Page 31: Flexassist
Loading the dishwasher Cup rack FlexAssist Raise the rack upwards using the The yellow coded FlexAssist parts yellow lever to make room for tall indicate which elements of the items. dishwasher baskets and cutlery tray are moveable. They also act as grips and Glasses can be arranged along the cup have symbols embossed on them to rack for support during the programme. - Page 32 Loading the dishwasher Hinged spikes Jumbo cup rack (depending on model) The rows of spikes can be lowered to The cup rack can be set at two different make more room for larger items such widths so that it can also accommodate as casserole dishes.
- Page 33 Loading the dishwasher Glass rail Adjusting the height This rail is designed to hold tall glasses You can set the glass rail at two and stemware securely. different heights. Lower the rail with the yellow lever Pull the rail upwards and click it back and lean tall glasses against it.
-
Page 34: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket Depending on the setting of the upper basket, the following plate dimensions In order to gain more space for taller can be accommodated. pieces of crockery in the lower or upper basket, the upper basket can be Dishwashers with cutlery basket adjusted on three levels with 2 cm (see data plate for model number) -
Page 35: Lower Basket
Loading the dishwasher Removable MultiComfort insert Lower basket The rear section of the lower basket is See "Loading the dishwasher, Loading used for washing cups, glasses, plates examples" for examples of how to and pots. load crockery and cutlery. You can remove the MultiComfort insert ... - Page 36 Loading the dishwasher FlexCare glass holder Glass rail Silicone padding in the FlexCare glass This rail is designed to hold tall glasses holder provides a stable and secure and stemware securely. hold for delicate stemware. Stemware, e.g. glasses and flutes, can be leaned against the glass rack or suspended from it.
- Page 37 Loading the dishwasher Hinged spikes Bottle holder The spikes at the front are used for The bottle holder can be used to wash washing plates, soup bowls, platters, narrow items, e.g. milk and baby dessert bowls, and saucers. bottles. Both rows of spikes can be lowered to make more room for large items, e.g.
-
Page 38: Cutlery
Loading the dishwasher Cutlery The upper spray arm must not be blocked by items which are too big 3D Cutlery tray + (depending on (e.g. cake slices). model) The side sections of the tray can be See "Loading the dishwasher, Loading moved into the middle using the yellow examples"... - Page 39 Loading the dishwasher Both rows of spikes in the middle section of the cutlery tray can be flipped over to make room for larger pieces of cutlery. You can use the yellow slide to adjust the height of the middle section of the cutlery tray to make more room for large items of cutlery, such as serving spoons and ladles.
-
Page 40: Loading Examples
Loading the dishwasher Loading examples Dishwashers with cutlery tray Upper basket Lower basket... - Page 41 Loading the dishwasher Cutlery tray Heavily soiled items...
-
Page 42: Operation
For optimum cleaning and drying remove coloured stains (e.g. tea, results, use Miele dishwasher coffee, tomato sauce). detergent and add Miele salt and Miele rinse aid separately. See Most dishwasher detergents are mildly "Optional accessories". alkaline and contain enzymes and oxygen based bleaching agents. - Page 43 Operation Detergent dosage Dishwasher detergents can Follow the dosage recommended by cause burning in the nose, mouth the manufacturer on the packaging. and throat if swallowed, or inhibit breathing. Unless directed otherwise, use one Avoid inhalation of powder detergent tab or add 20 to 30 ml detergents and do not ingest detergent to compartment II,...
-
Page 44: Adding Detergent
Operation Adding detergent Add the required amount of detergent and close the flap. Press the opening catch on the detergent dispenser. The flap will Make sure that the detergent spring open. packaging is properly closed after use to avoid it getting damp and The flap is always open at the end of a clumping together. -
Page 45: Switching On
Operation Switching on Selecting a programme Open the stopcock, if it is closed. Choose your programme according to the type of load and how dirty it is. Open the door. The different programmes and their Make sure the spray arms can rotate uses are described in the Programme freely. -
Page 46: Starting The Programme
Operation Starting the programme Time display Start the programme by closing the The estimated duration of the door. programme selected appears the display before the programme begins. The TimeControl indicator will light up During the programme, the time left to let you know the programme has until the end of the programme is started. -
Page 47: Timecontrol
Operation TimeControl Energy management The TimeControl indicator light lets you To save energy, the dishwasher will know how much longer the programme switch off automatically 10 minutes has to run with the door shut. after the last time a sensor has been pressed or after the end of the All four indicator lights under the programme (see "Settings, Optimise... -
Page 48: At The End Of The Programme
Operation At the end of the programme If you have deactivated the automatic door opening function (see At the end of a programme, the "Settings menu, AutoOpen"), but TimeControl indicator light will go out would still like to open the door at with the door shut. -
Page 49: Switching Off
Operation Switching off Unloading the dishwasher At the end of a programme: Dishes tend to break and chip more easily when they are hot. Allow the Open the door. dishes to cool until they are comfortable The dishwasher can be switched off enough to handle before unloading at any time using the ... -
Page 50: Interrupting A Programme
Operation Interrupting a programme Changing a programme A programme is interrupted as soon as If the detergent dispenser flap has the door is opened. already opened, do not change the If the door is closed again, the programme. programme will continue from the point it was at before the door was opened. -
Page 51: Programme Options
Programme options Short Extras Short Extra reduces the duration of Extras can be selected for the the programmes in which this option is programme you have chosen before available by up to 30% (see starting it. "Programme chart"). Open the door. The selection of the Short Extra may... - Page 52 Programme options Intensive lower basket Soak Intensive lower basket Extra Soak Extra is used for soaking intensifies cleaning performance in the crockery with dried on soiling. lower basket in programmes in which Energy and water consumption will this option is available. increase with this Extra.
-
Page 53: Delay Start With Ecostart
Programme options You then have a choice of Start at Finish Delay start with EcoStart EcoStart There are three ways of starting the Select the function you want. programme by means of delaying the start. You can set the start time or the Now enter the time you want. - Page 54 Programme options Start at Finish at With the Start at function, you set the With the Finish at function, you set the exact time you want the programme to latest time at which you wish the start at. programme to end. ...
- Page 55 Programme options EcoStart Changing or deleting set times EcoStart function allows you to take You can change the set times or the advantage of time variable economy programme before the start time in the rates of electricity. Before you can use display is reached.
-
Page 56: Heat Exchanger
Programme options Heat exchanger The heat exchanger should only be used in conjunction with a cold-fill This dishwasher is equipped with a heat dishwasher. exchanger, in which fresh water for the This function should be switched off programme is pre-heated, in order to if your dishwasher is connected to a save energy. -
Page 57: Detergentagent
Programme options DetergentAgent For optimum cleaning results, the dishwasher automatically adjusts the programme sequence to the type of detergent being used. Depending on the programme, this can mean that the running time and energy consumption vary slightly. If you only ever use combination products containing salt and rinse aid in your dishwasher, you can switch the reminders off if you wish (see "Settings... -
Page 58: Programme Chart
Programme chart Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying °C °C Automatic Variable programme sequence, sensor-controlled adjustment according to the amount of crockery and level of food deposits If required 45-65 If required 57-70 Intensive 75 °C QuickPower Wash Gentle ... - Page 59 Programme chart Consumption Duration Energy Water Cold water Hot water Litres Cold water Hot water 15 °C 55 °C 15 °C 55 °C h:min h:min 0.67 0.49 3:42 3:20 1:54-3:10 1:37-2:47 0.75 -1.05 0.50 -0.65 -15.0 1.30 0.90 14.5 3:17 2:54 1.30 0.80...
- Page 60 Programme chart Crockery Food deposits Programme features Variable, sensor-controlled programme Mixed, Short programme everyday crockery All normal food deposits Programme duration less than 1 hour Heat-sensitive glasses and plastic Gentle programme with Fresh, easily removed glass care food deposits Short programme Very quiet programme Mixed crockery Water and...
- Page 61 1 tab 25 ml 1 tab +short 25 ml Normal 55 °C 1 tab +short 25 ml Intensive 75 °C 10 ml 1 tab +short QuickPowerWash +short see "Detergent" best cleaning results are only achieved using Miele's quick dissolving UltraTab Multi...
-
Page 62: Further Programmes
Miele's dishwasher cleaner or food residues. conditioner (see "Optional accessories, Dishwasher care products"). Please... -
Page 63: Cleaning And Care
Cleaning the reflector panel can be removed with a special cleaning agent (available from Miele). Follow the The reflector panel for the In-operation instructions on the packaging. indicator light is situated in the coverplate underneath the worktop. -
Page 64: Cleaning The Door Front
Cleaning and care To avoid damaging the external Cleaning the door front surfaces, do not use: Soiling that is left too long might – cleaning agents containing soda, become impossible to remove and ammonia, acids or chlorides, could cause the external surfaces to alter or discolour. -
Page 65: Checking The Filters In The Wash Cabinet
Cleaning and care Checking the filters in the Cleaning the filters wash cabinet Switch the dishwasher off. The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. - Page 66 Cleaning and care Replace the filter combination so that To clean the inside of the filter, the flap it lies flat in the base of the wash must be opened: cabinet. Press catches together in the Then turn the handle clockwise to direction of the arrows as shown, and open the filter .
-
Page 67: Cleaning The Spray Arms
Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Switch the dishwasher off. Remove the spray arms as follows: ... -
Page 68: Problem Solving Guide
Most minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting your Miele dealer. The following guide may help you to find the reason for a fault, and to correct it. - Page 69 Switch the dishwasher back on. Select the programme you want. Close the door. If the fault message appears again, there is a technical fault. Call your Miele dealer. The Waterproof system has reacted. Waterproof fault ...
- Page 70 If this is the case, remove the item causing an obstruction and switch the dishwasher on again. If the same message appears again, call your Miele dealer. There may be a technical fault. Fault auto. door opening Open the door manually (see "Opening the door, Emergency door opener").
-
Page 71: Water Inlet Fault
Problem solving guide Water inlet fault Issue Cause and remedy All in-operation indicators are flashing quickly. The warning buzzer is sounding. One of the following faults is shown in the display: Water inlet fault. Please The stopcock is closed. open the stopcock ... -
Page 72: Water Drainage Fault
Problem solving guide Water drainage fault Issue Cause and remedy All in-operation Before rectifying the problem: indicators are flashing Switch the dishwasher off with the button. quickly. The water outlet is restricted. The warning buzzer is There might be water in the wash cabinet. sounding. -
Page 73: General Problems
Problem solving guide General problems Issue Cause and remedy The door will not open function has been permanently Knock2open when knocked. disabled. Switch the door opening mechanism on again (see "Settings, Knock2open"). If the door will still not open or if there is a power cut the door can still be opened with the door opening device supplied (see "Before using for the first time, Emergency door opener"). - Page 74 Problem solving guide Issue Cause and remedy Water remains in the Before rectifying the problem: wash cabinet at the end Switch the dishwasher off using the sensor. of a programme. The filter combination in the wash cabinet is clogged. ...
-
Page 75: Noises
Problem solving guide Noises Issue Cause and remedy Knocking noise in the A spray arm is knocking against an item in a basket. wash cabinet. Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the Items of crockery are insecure in the wash cabinet. -
Page 76: Unsatisfactory Washing Result
Problem solving guide Unsatisfactory washing result Issue Cause and remedy The dishes are not The dishes were not loaded correctly. clean. See notes in "Loading the dishwasher". The programme was not powerful enough. Select a more powerful programme (see "Programme chart"). - Page 77 Problem solving guide Issue Cause and remedy Crockery is not dry or The rinse aid dosage is set too low or the rinse aid cutlery and glasses are reservoir is empty. flecked. Replenish the reservoir, increase the dosage or change the brand of rinse aid (see "Before using for the first time, Rinse aid").
- Page 78 Problem solving guide Issue Cause and remedy White residue is visible The rinse aid dosage is set too low. on crockery and cutlery, Increase the dosage (see "Settings menu, Rinse clouding occurs on aid"). glassware; film can be There is no salt in the salt reservoir. wiped off.
-
Page 79: Maintenance
Replace the filter and seal, making and the water inlet hose threaded sure they are sitting correctly. union. This filter is available from Miele. Reconnect the inlet hose to the stopcock, making sure it goes on Cleaning the filter: correctly and is not cross-threaded. -
Page 80: Cleaning The Drain Pump And Non-Return Valve
Maintenance Cleaning the drain pump and non-return valve If the water has not been pumped away at the end of a programme the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Disconnect the dishwasher from the mains supply. -
Page 81: After Sales Service
– your Miele Dealer specific to your country please contact Miele. Contact details for Miele are given at the end of this booklet. N.B. A call- out fee will be charged for service visits where the problem could have been resolved as described in these instructions. -
Page 82: Optional Accessories
– with enzymes which are effective the brand used. even in low temperature programmes With Miele products, you can be sure of optimum results as these products have – with glass protection against been specially designed for Miele corrosion dishwashers. - Page 83 Optional accessories Dishwasher care products Miele cleaning and care products provide optimum care for your dishwasher. Dishwasher cleaner – cleans the dishwasher effectively and thoroughly – removes grease, bacteria and unpleasant odours – ensures excellent dishwashing results Dishwasher descaler – removes heavy limescale deposits –...
-
Page 84: Electrical Connection
Electrical connection Non-rewireable plugs BS 1363 Electrical connection The fuse cover must be refitted when The appliance is supplied with a mains changing the fuse, and if the fuse cover cable with moulded plug for is lost, the plug must not be used until a connection. -
Page 85: Plumbing
Water in the dishwasher must Provided your dishwasher has been not be used as drinking water. installed correctly, the Miele WaterProof System will protect you from water – The dishwasher may be connected to damage throughout its lifetime. a cold or hot water supply, max. - Page 86 Plumbing – The inlet hose is approx. 1.5 m long. After connecting the dishwasher to A 1.5 m long flexible metal extension the water supply, check that all hose (pressure tested to 14000 plumbing connections are watertight. kPa/140 bar) is available as an optional accessory, if required.
-
Page 87: Drainage
Plumbing Venting the drainage system Drainage If the on-site drain connection is – The appliance drainage system is situated lower than the guide path for fitted with a non-return valve, which the bottom basket rollers in the open prevents dirty water from flowing door, the drainage system must be back into the dishwasher via the vented. -
Page 88: Technical Data
Technical data Technical data Dishwasher model Standard Height 80.5 cm 84.5 cm (adjustable + 6.5 cm) (adjustable + 6.5 cm) Height of building-in recess Min. 80.5 cm Min. 84.5 cm (+ 6.5 cm) (+ 6.5 cm) Width 59.8 cm 59.8 cm Width of building-in recess 60 cm 60 cm Depth 57 cm 57 cm... -
Page 89: Settings Menu
Settings menu Select the Settings option. Settings menu for changing standard settings The display will change to show the Settings menu. To open the Settings menu Select the option you want to Switch the dishwasher on with the change. -
Page 90: Language
Settings menu Language Time The display can be set to appear in one The current time of day must be set of several different languages. before you can use the Delay start option. You can change the language in the display via the Language ... -
Page 91: Water Hardness
Settings menu Water hardness °d mmol/l °f Display Your dishwasher is fitted with a water softener which you need to programme to the water hardness level in your area. – The dishwasher must be programmed to the correct water hardness for your area. –... -
Page 92: Rinse Aid
Settings menu Rinse aid Consumption (EcoFeedback) You can adjust the rinse aid dosage for You can programme the dishwasher so best results. that the energy and water consumption The rinse aid dosage is set in stages of the currently selected programme from 0 to 6. -
Page 93: Ecostart
Settings menu Setting the electricity tariff times EcoStart Before you can use the EcoStart option, In order to run your dishwasher in the you must set at least one electricity most economical way, you can use the tariff time. EcoStart option to take advantage of your electricity supplier's time variable ... - Page 94 Settings menu Changing the electricity tariff times Deleting the electricity tariff times You can delete the settings for an You can change the start, finish or priority of an electricity tariff time. electricity tariff time and in doing so deactivate the EcoStart option for this...
-
Page 95: Change Main Menu
Settings menu Change main menu Save extras You can change the order of the Additional programme options can be programmes in the programme added to some programmes, e.g. Short selection menu and also enter your (see "Programme options, Extras"). favourite programmes into the first two You can use the Save extras option to... -
Page 96: Volume
Settings menu Night time Volume You can select the times for night time A sequence of audible tones will sound to begin and end. at the end of the programme or if there is a fault as long as the buzzer has been ... -
Page 97: Memory
Settings menu Memory Check filters With the Memory function activated, the You can adjust the interval at which the dishwasher will save the last reminder to check the filters appears. programme that was run. You can set an interval of between 30 When you switch the dishwasher off and 60 programme cycles. -
Page 98: Autoopen
Settings menu AutoOpen Knock2open At the end of programmes with a drying You can choose whether the door phase the door will open automatically should open with 1 or 2 knocks. a little in order to help the drying Select the setting you want and process (see "Programme chart"). -
Page 99: Optimise Standby
Settings menu Optimise standby Heat exchanger The dishwasher is supplied with the This dishwasher is equipped with a heat Optimise standby function set as exchanger (see"Programme options, standard. Heat exchanger). To save energy the dishwasher will Conditions switch off automatically a few minutes The heat exchanger function can be after the last time a button has been switched off if you do not wish to use it. -
Page 100: Software Version
Main menu WLAN module settings (where Showroom programme applicable) have to be reset separately (see "Settings, Miele@home, module For demonstration purposes only. settings"). The dishwasher is equipped with Select the one you want to reset. various demo programmes for showroom use. - Page 103 Tel. +966 11 2013501, Fax. +966 11 2013502 Dubai Taif Hadiya Street Tel. +966 12 7327001, Fax. +966 12 7369596 Khobar Al Zahran Road Tel. +966 13 8646150, Fax. +966 13 8646190 Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
- Page 104 G 6993 / G 6998 en-AE, SA M.-Nr. 10 651 350 / 00...