Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
& Notes: drivers. • Figures can deviate due to the different set executions. Table 2-1 Described Model Numbers and Diversity Mechanics Block Diagrams Schematics 19HFL3007D/10 10.1 10.2 10.3 10.5 11.1 22HFL3007D/10 10.1 10.2 10.4...
Technical Specs, Diversity, and Connections TPM9.3HE LA EN 3 Connections Rear Connectors Side Connectors TV ANTENNA SERV .U SCART (RGB/CVBS) AUDIO IN USB2 DVI/VGA CVBS/Y USB1 NETWORK HDMI 2 HDMI1 DIGITAL AUDIO OUT HDMI 19270_001_120410.eps 120412 Figure 2-1 Connection overview Note: The following connector colour abbreviations are used - D2+ Data channel...
Page 4
EN 4 TPM9.3HE LA Technical Specs, Diversity, and Connections - Audio R 0.5 V / 1 k 11 - RJ45: Ethernet - Audio R 0.5 V / 10 k - Audio L 0.5 V / 1 k - Ground Audio - Ground Blue - Audio L 0.5 V...
Spare Parts the following points: • Route the wire trees correctly and fix them with the For the latest spare part overview, consult your Philips Spare mounted cable clamps. Part web portal. • Check the insulation of the Mains/AC Power lead for external damage.
Page 6
EN 6 TPM9.3HE LA Precautions, Notes, and Abbreviation List result in sets which have the same CTN (Commercial Type 6 = play 16 : 9 format, 12 = play 4 : 3 Number; e.g. 28PW9515/12) but which have a different B.O.M. format number.
Page 7
6.5 MHz. L' is Band (VESA standard for communication I, L is all bands except for Band I channel and display). Using E-DDC, LG.Philips LCD (supplier) the video source can read the EDID Loudspeaker information form the display.
Page 8
SOPS Self Oscillating Power Supply Serial Peripheral Interface bus; a 4-wire synchronous serial data link standard S/PDIF Sony Philips Digital InterFace SRAM Static RAM Service Reference Protocol Small Signal Board Spread Spectrum Clocking, used to reduce the effects of EMI...
Mechanical Instructions TPM9.3HE LA EN 9 4. Mechanical Instructions Index of this chapter: Notes: 4.1 Cable Dressing • Figures below can deviate slightly from the actual situation, 4.2 Service Positions due to the different set executions. 4.3 Assembly/Panel removal for 22HFL3007 sets 4.4 Assembly/Panel removal for 22HFL3017 sets 4.5 Set Re-assembly Cable Dressing...
Page 10
EN 10 TPM9.3HE LA Mechanical Instructions 19380_100_120829.eps 120924 Figure 4-2 Cable dressing (22" 3007 series) back to 2012-Sep-28 div. table...
Page 11
Mechanical Instructions TPM9.3HE LA EN 11 19380_101_120829.eps 120924 Figure 4-3 Cable dressing (22" 3017 series) Service Positions For easy servicing of a TV set, the set should be put face down on a soft flat surface, foam buffers or other specific workshop tools.
Page 12
EN 12 TPM9.3HE LA Mechanical Instructions Assembly/Panel removal for 22HFL3007 sets 4.3.1 Stand Refer to Figure 4-4 for details. 1. Remove fixation screws [1] that secure the stand, pull out the stand downwards from the set. 4 × 16 19380_102_120903.eps 120924 Figure 4-4 Stand removal back to...
Page 13
Mechanical Instructions TPM9.3HE LA EN 13 4.3.2 Rear Cover 1. Remove the fixation screws [1,2] that secure the rear cover. 2. Lift the rear cover from the TV. Make sure that wires and Refer to Figure 4-5 for details. flat foils are not damaged while lifting the rear cover from Warning: Disconnect the mains power cord before removing the set.
Page 14
EN 14 TPM9.3HE LA Mechanical Instructions 4.3.4 Power Supply Unit (PSU) Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU. 1. Unplug all connectors from the PSU. 2.
Page 15
Mechanical Instructions TPM9.3HE LA EN 15 Assembly/Panel removal for 4.4.2 Rear Cover 22HFL3017 sets Refer to Figure 4-7 for details. 4.4.1 Stand Warning: Disconnect the mains power cord before removing the rear cover. 1. Remove fixation screws [1]and [2] that secure the rear Refer to Figure 4-7 for details.
Page 16
EN 16 TPM9.3HE LA Mechanical Instructions 4.4.7 IR/LED Board 1. Remove the stand as described earlier. 2. Gently release the clip of the panels cover on the left side, and take out the cover from the bezel. 3. Gently release the clip at the right side of the panel, and take the panel from the bezel.
Service Modes, Error Codes, and Fault Finding TPM9.3HE LA EN 17 5. Service Modes, Error Codes, and Fault Finding Index of this chapter: Life Timer 5.1 Test Points During the life time cycle of the TV set, a timer is kept (called 5.2 Service Modes “Op.
Page 18
EN 18 TPM9.3HE LA Service Modes, Error Codes, and Fault Finding – Automatic user menu time-out (menu switches controls will not have I+ button, but an “INFO” button back/OFF automatically. instead. – Auto Volume levelling (AVL). How to Exit SDM How to Activate SDM •...
Page 19
Service Modes, Error Codes, and Fault Finding TPM9.3HE LA EN 19 Main Menu Sub-menu 1 Sub-menu 2 Description Download from USB Copy Channel List from USB To download several settings from the USB stick to the TV Copy NVM from USB Copy Readable Info from Copy EDID from USB Initialize NVM...
Page 20
EN 20 TPM9.3HE LA Service Modes, Error Codes, and Fault Finding Default value Item Item value 19" 22" Description NVM COPY TV to USB Press OK Use this to store the NVM data to the REPAIR folder of a FAT formatted USB memory stick. The TV will write two files in the REPAIR folder of the memory stick.
Page 21
Service Modes, Error Codes, and Fault Finding TPM9.3HE LA EN 21 Contents of CSM • 1.1 Set Type This information is very helpful for a helpdesk/workshop as reference for further diagnosis. In this way, it is not necessary for the customer to look at the rear of the TV-set.
Page 22
EN 22 TPM9.3HE LA Service Modes, Error Codes, and Fault Finding Stepwise Start-up Standby Soft Mode Command Received, Switch previously in Standby Off(Mains Soft Mode (Power tact Standby Power Plug) switch) Digital Digital background background tasks started tasks completed TV Wakeup commands Received Standby...
Page 23
A description on how to upgrade the main 1. ComPair helps to quickly get an understanding on how to software can be found in the DFU or on the Philips website. repair the chassis in a short and effective way.
EN 24 TPM9.3HE LA Service Modes, Error Codes, and Fault Finding • FUS_clustername_version.zip: Contains the “autorun.upg” which is needed to upgrade the TV main software and the software download application. • NVM_clustername_version.zip: Default NVM content. Must be programmed via ComPair. 5.5.7 How to Copy NVM Data to/from USB When copying data to and from a USB memory stick, the folder...
Service Modes, Error Codes, and Fault Finding TPM9.3HE LA EN 25 – ERROR: 034 013 000 000 000: Error code 13 was Fault Finding and Repair Tips detected first and error code 34 is the last detected Note: (newest) error •...
Page 26
EN 26 TPM9.3HE LA Service Modes, Error Codes, and Fault Finding 5.8.10 Display option code Attention: In case the SSB is replaced, always check the Panel Code in CSM, even when picture is available. Performance with the incorrect display option code can lead to unwanted side-effects for certain conditions.
Alignments TPM9.3HE LA EN 27 6. Alignments Index of this chapter: In case you have a colour analyser: 6.1 General Alignment Conditions • Measure with a calibrated (phosphor- independent) color 6.2 Hardware Alignments analyser (e.g. Minolta CA-210) in the centre of the screen. 6.3 Software Alignments Consequently, the measurement needs to be done in a 6.4 Option Settings...
EN 28 TPM9.3HE LA Alignments Option Settings 6.5.1 SSB Identification 6.4.1 Introduction SSB’s of this chassis are identified by a “715” code on the SSB. 715Axxxx-Nnn-MMM-OOOO • 715 main category, Printed Wiring Board The microprocessor communicates with a large number of I •...
Circuit Descriptions TPM9.3HE LA EN 29 7. Circuit Descriptions Index of this chapter: Introduction 7.1 Introduction The TPM9.3HE LA is a new chassis launched in Europe in 7.2 Power Supply 2012 for institutional purposes. The whole range is covered by 7.3 DC/DC Converters MT5366IVGG/B PBGA-479 main IC so-called MT5366 7.4 Front-End Analogue and DVB-T, DVB-C, ISDB-T reception...
Page 30
EN 30 TPM9.3HE LA Circuit Descriptions 7.1.3 SSB Cell Layout DC/DC COMMON INTERFACE MT5366 CLASS-D TUNER SCART SERVICE CONNECTOR ANALOG I/O Headphone HDMI SWITCH HDMI 19380_201_120829.eps 120925 Figure 7-1 SSB layout cells (top view) back to 2012-Sep-28 div. table...
Page 31
This part is available in the regular market. PSL stands for Power Supply with integrated LED-drivers. Consult the Philips Service web portal for the order codes of the PSLS stands for a Power Supply with integrated LED-drivers boards.
Page 32
EN 32 TPM9.3HE LA Circuit Descriptions DC/DC Converters • +1V5, supply voltage for DDR3 (diagram B) • +3V3, general supply voltage The on-board DC/DC converters deliver the following voltages • +5V-TUN, supply voltage for tuner (depending on set execution): • +5V-USB, input intermediate supply voltage for USB •...
Page 33
Circuit Descriptions TPM9.3HE LA EN 33 7.4.2 DVB-T/C DTV It has the following features: • Multi-standard digital video decoder (MPEG-2, H.264, MPEG-4) The Front-End for DVB-T/C DTV consist of the following key • Integrated DVB-T/DVB-C channel decoder components: • Integrated CI+ •...
EN 34 TPM9.3HE LA IC Data Sheets 8. IC Data Sheets This chapter shows the internal block diagrams and pin configurations of ICs that are drawn as “black boxes” in the electrical diagrams (with the exception of “memory” and “logic” ICs).
Page 35
IC Data Sheets TPM9.3HE LA EN 35 Diagram 10-2-3 Peripheral B03, MT5366IVGG/B PBGA-479 (IC U4001) Block diagram VADC × 4 MT5366CV 19080_300_110316.eps 120102 Figure 8-2 Internal block diagram back to 2012-Sep-28 div. table...
Page 36
EN 36 TPM9.3HE LA IC Data Sheets Pinning information MT5366CV [1/2] 19080_301_110316.eps 120102 Figure 8-3 Pin configuration [1/2] back to 2012-Sep-28 div. table...
Page 37
IC Data Sheets TPM9.3HE LA EN 37 Pinning information MT5366CV [2/2] 19080_302_110316.eps 120102 Figure 8-4 Pin configuration [2/2] back to 2012-Sep-28 div. table...
Page 38
EN 38 TPM9.3HE LA IC Data Sheets Diagram 10-2-6 Speaker B06, STA381BWTR (IC U6002) Block diagram STA381BW OUT 1A OUT 1B 2.1 Channel Half MCLK OUT 2A Audio Processor Bridges OUT 2B Modulator STAudioFx FFX3A LRCKI STSpeakerSafe FFX3B Parametric EQ BICKI Binary Volume...
Page 39
IC Data Sheets TPM9.3HE LA EN 39 Diagram 10-2-12 GPIO & RJ45 B12, RTL8201FL-VB-CG (IC U4010) Block diagram RTL8201FL Pinning information RTL8201FL 19240_302_120221.eps 120221 Figure 8-6 Internal block diagram and pin configuration back to 2012-Sep-28 div. table...
Block Diagrams TPM9.3HE LA EN 43 9. Block Diagrams Wiring diagram 19" S35 series WIRING DIAGRAM 19" (S35 series) Board Level Repair See note in chapter 6 about cable position numbers. Component Level Repair Only for authorized workshops to panel CN4012 (1053) MAIN POWER SUPPLY...
Block Diagrams TPM9.3HE LA EN 44 Wiring diagram 22" 3007 series WIRING DIAGRAM 22" (3007 series) Board Level Repair See note in chapter 6 about cable position numbers. Component Level Repair Only for authorized workshops to panel CN4012 (1053) MAIN POWER SUPPLY (1054) USB1 SERV .U...
Block Diagrams TPM9.3HE LA EN 45 Wiring diagram 22" 3017 series WIRING DIAGRAM 22" (3017 series) Board Level Repair See note in chapter 6 about cable position numbers. Component Level Repair Only for authorized workshops to panel CN6005 CN4012 MAIN POWER SUPPLY (1054) (1053) USB1...
Circuit Diagrams and PWB Layouts TPM9.3HE LA EN 51 10.2 B 715G5430 SSB S35 series 10-2-1 System Power 1 System Power 1 ANALOG POWER AVDD1V2 from AVDD3V3 PWR_ON/OFF PWR_ON/OFF 3 STANDBY POWER +5VSB from STB_PWR5V OPWRSB OPWRSB BRIGHT_ADJ BRIGHT_ADJ 11 INVERTER_ON_OFF AVDD3V3 INVERTER_ON_OFF 11...
Page 52
Circuit Diagrams and PWB Layouts TPM9.3HE LA EN 52 10-2-2 System Power 2 System Power 2 PANEL_VCC_ON/OFF PANEL_VCC_ON/OFF TUNER POWER +5V_TUNER PANEL_VCC PANEL POWER PANEL_VCC form +12V 2,4,5,6,7,8,9,10,11,12,13,14,15,16,17 from +16V via 12V_TUN +5V_SW +12V PWR_ON/OFF R7021 PWR_ON/OFF 2 Q7004 NC/0R05 4A 1/4W R7026 R7030 AON4421...
Page 79
Circuit Diagrams and PWB Layouts TPM9.3HE LA EN 79 10-7-3 Hotel panel layout top CN01 CN02 CN601 C610 CN04 C603 C606 FB602 R608 C607 D602 CN03 C605 C618 CN05 L601 C609 C619 C616 C620 ZD601 U601 C614 R619 R607 R611 C613 R601 R615...
Page 80
Circuit Diagrams and PWB Layouts TPM9.3HE LA EN 80 10-7-4 Hotel panel layout bottom 2011-05-17 Hotel panel 715G5482 Layout bottom 19360_503_120822.eps 120906 back to 2012-Sep-28 div. table...