Laser safety This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
The unique features of DVD-Video, such as selection of sound track, subtitle languages and different camera angles (again depending on the disc), are all included. What’s more, Philips Child Lock lets you decide which discs your children will be able to see.You will find the On-Screen Display, player display, and remote control make the player easy to use.
– Remote Control with batteries – Audio/video cables – AC cord – Instructions for use If any item is damaged or missing, contact your retailer or Philips. Keep the packaging materials; you may need them to transport your player in the future. Placement –...
Functional Overview Front Panel POWER ON/OFF – Switch the player to on/off mode Standby indicator – Lights up red when the player is in standby mode DISPLAY – Shows the current status of the player 9 STOP T – NEXT title/chapter/track B PLAY –...
Functional Overview Rear Panel Video output (S-Video) – Connect to a TV with S-Video (Y/C) inputs Video output (CVBS) – Connect to a TV with CVBS video inputs Video output (Y/Cb/Cr) – Connect to a TV with Y/Cb/Cr video inputs Surround speaker signal output –...
Display Functional Overview Favourite Track Selection Play/Pause Repeat A-B/Chapter/Title/Track Time in hours, minutes and seconds (V)CD disc indicater DVD disc indicater The number of DVD chapters or (V)CD tracks The number of DVD titles...
General Explanation ¶ Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Possible connections are shown in the following drawings. ¶ Please refer to the manuals of your TV, VCR, stereo system or other manuals as necessary to make the best connections.
Analog connection to a multi-channel A/V receiver with 6CH connectors MAINS ¶ This DVD player contains a multi-channel decoder. Connect the audio outputs to the corresponding inputs of your A/V receiver with six audio cables. In the Audio output menu, set Analog output to 6 Channels model.
Playback will start automatically. NOTE: – If your TV system is not align with your DVD player, the player might not work. If this happens, you can press the OPEN/CLOSE key to open the disc tray and press the ZOOM key on the remote control to enforce the player to adapt to your TV system.
Playing a DVD-video disc Video control during playback STOP key on the remote control ¶ You can resume the play from the point at which you stopped last time by pressing the STOP key once. ¶ It will start from the beginning if you pressed the STOP key twice to stop a playback.
DVD disc Playing a DVD-video disc Playing title/chapter Title & chapter (T&C) A DVD disc may have one or more titles , and each title may have one or more chapters. It depends on the content (a movie, video clips, a drama series, etc) on the disc.
Playing a DVD-video disc original picture zoomed picture angle 1 angle 2 Bonjour Hello Good night Bonsoir! Special DVD features Zoom ¶ Press the ZOOM key on the remote control to get the picture enlarge twice than the original size. Press ZOOM again to get a four time in size enlarge.
Playing a Super VCD/VCD/CD disc Disc Specification Icons This icon indicates the description of functions for CD. This icon indicates the description of functions for VCD. This icon indicates the description of functions for SVCD. Video control during playback PAUSE/STEP key on the remote control ¶...
Playing a Super VCD/VCD/CD disc Playing title/track Use PBC (PlayBack Control) ¶ Playback control is a title/track index protocol between player and discs. When a disc is recorded with a standard VCD or SVCD format, there will be a menu which include titles/tracks for users to select the content of a movie or other video programs.
Page 18
Playing a Super VCD/VCD/CD disc A-B key A-B key enables you to choose a certain program to repeat. Refer to the instruction on the screen. ¶ Press the A-B key once to set a start point. ¶ Press the A-B key twice to set an end point. At the same time, it will begin to repeat from the start point.
Playing a Super VCD/VCD/CD disc Special VCD - features Zoom ¶ Press the ZOOM key on the remote control to get the picture enlarge twice than the original size. Press ZOOM again to get a four time in size enlarge. Use the 341 2 key to view the available zoom picture. ¶...
Enter the setup menu Press the STOP key first ¶ Enter the Setup Menu by pressing the SETUP key in the STOP mode. Remember the SETUP key will not respond if you press it during playback. ¶ When you quit the setup, the setting will be stored in the player’s memory even when the player is switched to power off.
OSD (On-Screen-Display) ¶ This feature is used to display playback information. When it is set to off, the DVD player will close the OSD information, even if you press the OSD key on the remote control. ¶ Setup the item as follows: –...
¶ Setup the item as follows: – Use the 1 2 keys to highlight the item VIDEO in the top menu, then press the SELECT key to open the first level submenu. – Use the 34 keys to select TV SHAPE item. –...
Setup Menu Password ¶ This password is used on the parental control and disc lock. ¶ Use the 1 2 keys to highlight the item RATING in the top menu, then press the SELECT key to open its submenu. ¶ Use the 34 keys to highlight the item PASSWORD and enter your secret numbers.
Disc lock ¶ Although you can’t use parental control on VCD and SVCD discs, but you can still use disc lock to limit the disc playback on your player. ¶ When you lock the current disc, the player will record its serial number for the recognization.
– Press the 34 keys to select the desired option. ON: When playback the disc with Dobly Pro Logic signal recorded on it, DVD player will decode and output of Dolby Pro Logic surround sound. OFF: Disable the output of Dolby Pro Logic surround sound.
Disc maintenance Disc maintenance Some problems occur because the disc inside the player is dirty. To avoid those problems, clean your discs regularly. ¶ When the disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from center to out side. Caution: –...
NTSC/PAL setting at the DVD player matches the video signal of your television. – If your TV video signal is NTSC, select the NTSC setting at the DVD player. – If your video signal is PAL, select the PAL setting.
GENERAL * Power supply 110 ~ 240V 50,60Hz * Power consumption < 25W * Video standard NTSC/PAL changable ANALOG AUDIO OUTPUT * Audio channels left/right * Output voltage 2.0 V * Frequency responds range 20Hz ~ 20KHz * S/N (signal/noise) 90dB DIGITAL AUDIO OUTPUT * Digital...
Page 29
The products and ser vices described herein are not necessarily available in all countries Due to continuous product improvements this document is subject to change without notice. Meet Philips at the Internet http://www.philips.com DVD 707 CLASS 1 LASER PRODUCT 3141 016 18661...